gar wrote on Nov 22
nd, 2013 at 5:54am:
Quote:I've added a new video that shows a fast start from Cold-n-Dark (there's audio this time!)
youtube.com/watch?v=nkZppl-3KWo
again did exact same as video nothing happens
when I toggle the engine starters up I hear them and the dials move when they get to 20 just like you did I take the throttles up just above 0% nothing happens the fuel and rpm dials stay at zero and we do not hear them start
the starting noise you hear we can only hear it when I press and hold CTRL+SHIFT+F4 we hear that popping then they start and stay on but when I let go it stops and everything dies
When starting the engines, here is what I do:
1. Turn the Master Battery Switch ON
2. Press E, release it, then press 1 (NOT Numpad 1) - so that you are only in control of Engines 1 & 2
3. Turn on Engine Start for Engines 1&2. As they spool up (before they reach 20%), press F2 AND HOLD IT until the levers are all the way back (it is NOT reverse thrust), then F1 to return it to 0%, then F3 to advance it slightly. Engines 1 & 2 should start.
4. Press E, release it, the press 2 - so that you are only in control of Engines 3 & 4
5. Turn on Engine Start for Engines 3 & 4. As they spool up (before they reach 20%), press F2 AND HOLD IT until the levers are all the way back, then F1 to return it to 0%, then F3 to advance it slightly. Engines 3 & 4 should start.
6. Press E, release it, the press 3 - so that you are only in control of Engines 5 & 6
7. Turn on Engine Start for Engines 5 & 6. As they spool up (before they reach 20%), press F2 AND HOLD IT until the levers are all the way back, then F1 to return it to 0%, then F3 to advance it slightly. Engines 5 & 6 should start.
8. Press E, release it, the press 4 - so that you are only in control of Engines 7 & 8
9. Turn on Engine Start for Engines 7 & 8. As they spool up (before they reach 20%), press F2 AND HOLD IT until the levers are all the way back, then F1 to return it to 0%, then F3 to advance it slightly. Engines 7 & 8 should start.
10. Press E, release it, then press 5. This allows you to control of ALL your engines.
11. Turn on all the Engine Generators.
Follow that, and the engines should start.
This is not doing it using a checklist, this is just a simple way of starting the engines in the B-52. It works every time for me.
NOTE: The CS B-52 does not have reverse thrust - so IF you pull the throttle levers all the way back when you land, you will shut all the engines down!Don't worry, you won't be the first to do it. I know I diud it the first few times I flew the B-52