Visit Captain Sim web site  
  Welcome, Guest. Please Login or Register

 

Page Index Toggle Pages: 1 Send TopicPrint
wing modelling. (Read 333 times)
husky
New Member
Offline



Posts: 2
Joined: Jan 9th, 2021
wing modelling.
Apr 4th, 2021 at 12:11pm
Print Post  
great stuff picking up the classics series of the b737.
waiting for  a good b737 classics after quality wings stopt theres.

plz dont take the below as critizme just trying to point out some improvments.
i dont now if there is any changes between the early b737s

- but the after wings fairing seems a bit of.

i dont now if it is posibly in this stage to addept the modelling or there are still things to come in later models.

the following things caught my attention the outer leading edge slat and wing design are modeld as the 200 series.
the 300/400 series hav some aero dynamic adjusments.

-the spoilers seems to be a bit short .
-the upper flaps slot is wider and the slat drop further downwards
-and the after egine pylon is sleaker its seams bulged a bit.

maybe this is modelt in later version.
if any of the above needs some pictures to show what i meen let me know
  
Back to top
 
IP Logged
 
Bas1997
Full Member
*
Online



Posts: 17
Location: The Netherlands
Joined: May 8th, 2020
Re: wing modelling.
Reply #1 - Apr 4th, 2021 at 6:14pm
Print Post  
+1 on this one.

Lovely aeroplane, but although being in BETA, it lacks details. Wings look like -200 variant!
  

Back to top
 
IP Logged
 
KaelanR
New Member
Offline



Posts: 4
Location: Amsterdam
Joined: Mar 28th, 2015
Gender: Male
Re: wing modelling.
Reply #2 - Apr 6th, 2021 at 7:39pm
Print Post  
I agree the wing seems rather small and same goes for spoilers. I also had to add that the little boards (of the flaps) don’t kinda ‘disconnect’ from the main flaps, but instead just goes down with the flaps. Also the aileron has a little aileron within it and hope to also see it animated like in real life (moves opposite direction of main aileron) I understand this is beta so maybe none of it is properly modelled and coded yet, but those some of my tips.
  
Back to top
 
IP Logged
 
Kukan Katamaran
Full Member
*
Offline



Posts: 6
Joined: Apr 2nd, 2021
Re: wing modelling.
Reply #3 - Apr 6th, 2021 at 8:40pm
Print Post  
KaelanR wrote on Apr 6th, 2021 at 7:39pm:
I agree the wing seems rather small and same goes for spoilers. I also had to add that the little boards (of the flaps) don’t kinda ‘disconnect’ from the main flaps, but instead just goes down with the flaps. Also the aileron has a little aileron within it and hope to also see it animated like in real life (moves opposite direction of main aileron) I understand this is beta so maybe none of it is properly modelled and coded yet, but those some of my tips.


This little aileron is called: This little aileron is called: aileron balance tab
  
Back to top
 
IP Logged
 
Stian
Full Member
*
Offline



Posts: 16
Location: Norway
Joined: Jan 11th, 2016
Gender: Male
Re: wing modelling.
Reply #4 - Apr 7th, 2021 at 4:54pm
Print Post  
This wing topic should be moved to bug list Captainsim! And has to be fixed!
The wing you got now is clearly a re-use from 737-200.
737-300 wing is all different!
  
Back to top
 
IP Logged
 
Ryz
Full Member
*
Offline



Posts: 110
Location: KCLT
Joined: Jan 24th, 2015
Gender: Male
Re: wing modelling.
Reply #5 - Apr 7th, 2021 at 7:41pm
Print Post  
Stian wrote on Apr 7th, 2021 at 4:54pm:
This wing topic should be moved to bug list Captainsim! And has to be fixed!
The wing you got now is clearly a re-use from 737-200.
737-300 wing is all different!


They are different but very slightly. In fact the 737-200 wing is bigger than the 737-300 wing which doesn't make sense. I just compared them and the -200 is a little bit bigger than the -300. The -300 wingspan is about a foot longer than the -200 which isn't a lot but not only copying the -200 wing for the most part but making the -300 wing smaller than the -200 is bizarre.
  

Back to top
 
IP Logged
 
Ryz
Full Member
*
Offline



Posts: 110
Location: KCLT
Joined: Jan 24th, 2015
Gender: Male
Re: wing modelling.
Reply #6 - Apr 7th, 2021 at 8:00pm
Print Post  
I should say Stian is the reason I noticed that wing problem. I checked when they mentioned the wing was a copy.

I also misspoke when I said the 300 wing is about a foot longer than the 200. The 300 is a little under 2ft wider. 1.9ft to be exact.

Am I the only one who noticed this? If you guys did copy the -200 wing for the most part did you consciously scale the wing down? I don't see how that's possible. To be fair the wing does look different like there were some significant changes but messing up the scaling that bad is a little weird. They're both made by CaptainSim which means you guys have the files of both so logically it'd be weird to mess it up. Don't mean to sound accusatory but its true.
  

Back to top
 
IP Logged
 
etopsbr
Full Member
*
Offline



Posts: 5
Joined: Apr 7th, 2021
Re: wing modelling.
Reply #7 - Apr 7th, 2021 at 10:27pm
Print Post  
Yes, I really hope that model was not final. When you compare with the CS 767 for exemple, thats a HUGE difference. In all areas of the model. Definetly a lot of B737-200 was used here, but that product is already pretty old!
  
Back to top
 
IP Logged
 
Krake802
Full Member
*
Offline



Posts: 62
Joined: Jan 3rd, 2019
Re: wing modelling.
Reply #8 - Apr 16th, 2021 at 12:56pm
Print Post  
Pleaseeee Captainsim can you bring this in the next update?! Really wasting the Virtual cabin here not seeing the wings!
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
 
  « Board Index ‹ Board  ^Top