CAPTAIN SIM FORUM - 757 p3D

(UTC)


	Welcome, Guest. Please Login or Register

CAPTAIN SIM FORUM › 757 Captain › 757 version 4.x (FSX ONLY) › 757 p3D

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: [1]

757 p3D (Read 28939 times)

macejoj Full Member Offline Posts: 114 Joined: Apr 8^th, 2008	757 p3D Nov 30^th, 2013 at 10:31am	Print Post
	Hello, I know cs not supporting p3D, however, just a question on experience from it. I tried that all seems to work well in cs757. However, internal cabin cannot be lighted (cockpit is OK...). Do you know it is because of p3D or could be some other problem ? Does anybody have the similar problem ?


	IP Logged

Markoz CS Team Offline Posts: 12370 Location: Victoria, Australia Joined: Apr 24^th, 2009 Gender:	Re: 757 p3D Reply #1 - Dec 1^st, 2013 at 1:32am	Print Post
	P3D v1.4 or P3D v2? Yesterday I did a beautiful flight with the 752 in P3D v2 and the lighting worked fine (although the VC is darker than it is in FSX or P3D v1.4). It's some of the sounds that don't work, and I noticed that the DLL.xml file wasn't there. As it turned out, the DLL.xml file didn't appear until after I had installed FSUIPC4 v4.923, after that flight. I don't recall having any problems in P3D v1.4, but I can always check, seeing as I still have v1.4 installed. Edited: I just checked in P3D v2, and the VC lighting doesn't work properly. It's probably too dark to begin with in v4.6 and P3D v2 only makes it worse. Using the floodlights enable me to see it to some degree. Yesterdays flight must have been just before night.

	Mark Fletcher PC: i7 10700K @3.8/5.1GHz \| 64GB DDR4 3200 \| 12GB RTX 4070 Super \| 32" LCD Monitor \| 1TB SSD & 2x2TB SSD \| Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020 15.6" Gaming Laptop: i7 7700HQ \| 32GB DDR4 \| 6GB GTX 1060 \| 256GB SSD & 1TB HDD \| Win 10 Pro 64bit - FSX-SE/P3D4
	IP Logged

macejoj Full Member Offline Posts: 114 Joined: Apr 8^th, 2008	Re: 757 p3D Reply #2 - Dec 1^st, 2013 at 9:05am	Print Post
	Many thanks ! Meanwhile I sorted out somehow lighting (it sometimes works sometimes not...). However, indeed problem is with some sounds... So I will try to install FIUPS as you suggest and will see ! thanks !


	IP Logged

macejoj Full Member Offline Posts: 114 Joined: Apr 8^th, 2008	Re: 757 p3D Reply #3 - Dec 1^st, 2013 at 9:27am	Print Post
	Markocz, I installed FSUIP latest version. It seems it is registered in P3d but no progress with sounds in cs757. Any tip what I could do wrong ? thanks !


	IP Logged

Markoz CS Team Offline Posts: 12370 Location: Victoria, Australia Joined: Apr 24^th, 2009 Gender:	Re: 757 p3D Reply #4 - Dec 1^st, 2013 at 5:36pm	Print Post
	macejoj wrote on Dec 1^st, 2013 at 9:27am: Markocz, I installed FSUIP latest version. It seems it is registered in P3d but no progress with sounds in cs757. Any tip what I could do wrong ? thanks ! This: �<Launch.Addon> <Name>Captain Sim 757 Sound</Name> <Disabled>False</Disabled> <Path>Captain_Sim\757\cs.sound.dll</Path> �</Launch.Addon> Needs to be added to the DLL.xml file. Open the run command and enter this (use copy and paste): %AppData%\Lockheed Martin\Prepar3D v2\DLL.XML and it will open the DLL.XML file. Make sure you backup the original DLL.XML file before modifying it. And be sure that the </Launch.Addon> (the last line from the 757 sound entry) is ABOVE the LAST ENTRY LINE - </SimBase.Document> - in the DLL.XML. Like this: �<Launch.Addon> <Name>Captain Sim 757 Sound</Name> <Disabled>False</Disabled> <Path>Captain_Sim\757\cs.sound.dll</Path> �</Launch.Addon> </SimBase.Document> The sounds in the 757 should work after doing that.

	Mark Fletcher PC: i7 10700K @3.8/5.1GHz \| 64GB DDR4 3200 \| 12GB RTX 4070 Super \| 32" LCD Monitor \| 1TB SSD & 2x2TB SSD \| Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020 15.6" Gaming Laptop: i7 7700HQ \| 32GB DDR4 \| 6GB GTX 1060 \| 256GB SSD & 1TB HDD \| Win 10 Pro 64bit - FSX-SE/P3D4
	IP Logged

macejoj Full Member Offline Posts: 114 Joined: Apr 8^th, 2008	Re: 757 p3D Reply #5 - Dec 1^st, 2013 at 7:35pm	Print Post
	Mark, it works perfectly now. Many thanks ! So now only the lights to be fixed..-)). It works for me only if I start some other plane before and only then cs757, then internal lights including navigation lights work... So perhaps there can be some initiation trick... ? JM


	IP Logged

FabioL Full Member Offline Posts: 99 Joined: Nov 11^th, 2012	Re: 757 p3D Reply #6 - Dec 1^st, 2013 at 10:44pm	Print Post
	May I join in with a question? I tried the CS752 in P3D V1.4, and it was fine but of course the v-speed gauge wouldn't work. Has this been tried in P3DV2? I feel I can't fly my favourite CS aircraft without the v-speed gauges! Thanks, Fabio

	Captain Sim C-130, 727, 737, 757, 767, 777, L1011, CS WX Radar & CS Weapon
	IP Logged

Markoz CS Team Offline Posts: 12370 Location: Victoria, Australia Joined: Apr 24^th, 2009 Gender:	Re: 757 p3D Reply #7 - Dec 2^nd, 2013 at 4:45am	Print Post
	FabioL wrote on Dec 1^st, 2013 at 10:44pm: May I join in with a question? I tried the CS752 in P3D V1.4, and it was fine but of course the v-speed gauge wouldn't work. Has this been tried in P3DV2? I feel I can't fly my favourite CS aircraft without the v-speed gauges! Thanks, Fabio What is it not doing? I have it installed with my 757 in P3D v1.4, but I don't actually use it. When I copied it to P3D v2, it was still there for the first flight, but I didn't use it, and because I had seen it thee, I then went and removed it (from v2). It's still installed in P3D v1.4 though.

	Mark Fletcher PC: i7 10700K @3.8/5.1GHz \| 64GB DDR4 3200 \| 12GB RTX 4070 Super \| 32" LCD Monitor \| 1TB SSD & 2x2TB SSD \| Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020 15.6" Gaming Laptop: i7 7700HQ \| 32GB DDR4 \| 6GB GTX 1060 \| 256GB SSD & 1TB HDD \| Win 10 Pro 64bit - FSX-SE/P3D4
	IP Logged

FabioL Full Member Offline Posts: 99 Joined: Nov 11^th, 2012	Re: 757 p3D Reply #8 - Dec 2^nd, 2013 at 4:02pm	Print Post
	I don't have P3D V1.4 installed any longer, for various reasons. One reason was the Direct Sound DLL that it needs that isn't P3D compatible (I'm not near my PC at the moment, and the module name escapes me). The v-speed gauges I find are really important accessories for all my CS aircraft, and I couldn't happily get along without.

	Captain Sim C-130, 727, 737, 757, 767, 777, L1011, CS WX Radar & CS Weapon
	IP Logged

Markoz CS Team Offline Posts: 12370 Location: Victoria, Australia Joined: Apr 24^th, 2009 Gender:	Re: 757 p3D Reply #9 - Dec 3^rd, 2013 at 12:45am	Print Post
	The cs.sound.dll for the Captain Sim 757 (and 767) works fine in both v1.4 and v2. You probably never copied the entry from the FSX DLL.xml file over to the P3D DLL.xml file. Don't worry though, you wouldn't be the first person hadn't done that, even I forgot to do that when I first installed P3D.

	Mark Fletcher PC: i7 10700K @3.8/5.1GHz \| 64GB DDR4 3200 \| 12GB RTX 4070 Super \| 32" LCD Monitor \| 1TB SSD & 2x2TB SSD \| Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020 15.6" Gaming Laptop: i7 7700HQ \| 32GB DDR4 \| 6GB GTX 1060 \| 256GB SSD & 1TB HDD \| Win 10 Pro 64bit - FSX-SE/P3D4
	IP Logged

fuzzy11 Full Member Offline Posts: 81 Joined: Aug 20^th, 2011	Re: 757 p3D Reply #10 - Dec 3^rd, 2013 at 4:39pm	Print Post
	How did you install it? I have FSX version installed and I get two choices 1) repair or 2) uninstall. When I try to point to P2 directory, it of course does not recognize that directory. BTW, I looked to create a new topic, but had problems finding the invisible button.


	IP Logged

Markoz CS Team Offline Posts: 12370 Location: Victoria, Australia Joined: Apr 24^th, 2009 Gender:	Re: 757 p3D Reply #11 - Dec 4^th, 2013 at 2:32am	Print Post
	I didn't actually "install" it in P3D, I copied everything from FSX to P3D. I did this for both version 1.4 and version 2. However. There is a program called FSX to Prepar3D Migration Tool (updated for P3D v2), that can be used to install aircraft into P3D. It will install everything as it should be in P3D instead of FSX. I used an older version to test installing the CS Weather Radar into P3D v1.4, and it worked perfectly, but all my links in the Start Menu pointed to the P3D installation, so I had to repair the FSX version to get the links pointing to the FSX installation. I haven't tried the latest version of FSX to Prepar3D Migration Tool yet, but I would expect it to work fine.

	Mark Fletcher PC: i7 10700K @3.8/5.1GHz \| 64GB DDR4 3200 \| 12GB RTX 4070 Super \| 32" LCD Monitor \| 1TB SSD & 2x2TB SSD \| Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020 15.6" Gaming Laptop: i7 7700HQ \| 32GB DDR4 \| 6GB GTX 1060 \| 256GB SSD & 1TB HDD \| Win 10 Pro 64bit - FSX-SE/P3D4
	IP Logged

macejoj Full Member Offline Posts: 114 Joined: Apr 8^th, 2008	Re: 757 p3D Reply #12 - Dec 4^th, 2013 at 10:17pm	Print Post
	Mark, others another point to p3d and cs757... might sound little bit strange or too detailistic..however, in clicking/turing knobs either on OH panel or main panel, it seems that in P3D it is somehow much slower and clicks in keyboard and/or touchpad must be with much higher time pauses in order to react by P3D than by FSX (even with very similar FPS). Do you know if cs757 has some .cfg file which can control this feature or behavior ?? many thanks ! JM


	IP Logged

Markoz CS Team Offline Posts: 12370 Location: Victoria, Australia Joined: Apr 24^th, 2009 Gender:	Re: 757 p3D Reply #13 - Dec 5^th, 2013 at 2:01am	Print Post
	Sorry, but I don't know of any way to improve/fix the response time problem, and I don't think there's anything in the aircraft.cfg or panel.cfg will make any difference either. It seems to happen on the P3D default aircraft too, so I've gotten used to the fact that it has slower response time.

	Mark Fletcher PC: i7 10700K @3.8/5.1GHz \| 64GB DDR4 3200 \| 12GB RTX 4070 Super \| 32" LCD Monitor \| 1TB SSD & 2x2TB SSD \| Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020 15.6" Gaming Laptop: i7 7700HQ \| 32GB DDR4 \| 6GB GTX 1060 \| 256GB SSD & 1TB HDD \| Win 10 Pro 64bit - FSX-SE/P3D4
	IP Logged

macejoj Full Member Offline Posts: 114 Joined: Apr 8^th, 2008	Re: 757 p3D Reply #14 - Dec 5^th, 2013 at 8:56pm	Print Post
	understand, so will see if any fix/change can be done on p3D level. However, trying to explore combination of P3D and cs757 furthermore..-)) Once I fly IFR flight and set-up flight via P3D it downloads to FMC of cs757 normally, however, many waypoints of different names are position on the same place (meaning, there are several waypoints 0 miles far from each other....). Do you think the difference in databases of waypoints is caused by P3D or cs757. Any way how to align those in your opinion... ? regards ! JM


	IP Logged

Markoz CS Team Offline Posts: 12370 Location: Victoria, Australia Joined: Apr 24^th, 2009 Gender:	Re: 757 p3D Reply #15 - Dec 6^th, 2013 at 1:53am	Print Post
	The FMC only reads the data from the Prepar3D\Captain_Sim\navigation folder (when you program the route/flight plan in the FMC). All waypoints and fixes are listed in there. Depending on when the fixes and waypoints in P3D were done (if they are the same as FSX, then that was 2006 or somewhere around then), whereas the navigation data that comes with the 757 v4.6 is dated 07/APR/2011 - 04/MAY/2011 (AIRAC 1104), so the actual locations of the some fixes/waypoint will be different from what P3D has. If you want to uses the default fixes/waypoints/jetways of P3D, then you create the route using the P3D flight planer, save it and load it with the FMC. You will still need to add a SID and a STAR if you do that. So what happens is the coordinates for the fixes and waypoints are provided by the flight plan itself (the FMC is reading the flight plan data), and not from the data in the Prepar3D\Captain_Sim\navigation folder. The SID and STAR data will be added to the FMC flight plan, based on the coordinates in the Prepar3D\Captain_Sim\navigation sids.db and star.db files. This applies to Prepar3D v2 as well, if that's what you are using.

	Mark Fletcher PC: i7 10700K @3.8/5.1GHz \| 64GB DDR4 3200 \| 12GB RTX 4070 Super \| 32" LCD Monitor \| 1TB SSD & 2x2TB SSD \| Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020 15.6" Gaming Laptop: i7 7700HQ \| 32GB DDR4 \| 6GB GTX 1060 \| 256GB SSD & 1TB HDD \| Win 10 Pro 64bit - FSX-SE/P3D4
	IP Logged

fuzzy11 Full Member Offline Posts: 81 Joined: Aug 20^th, 2011	Re: 757 p3D Reply #16 - Dec 8^th, 2013 at 7:00pm	Print Post
	I installed and setup the v2 migration tool and none of the CS stuff shows up. So, I tried your "just copy the files" --- Captain Sim dir off the main FSX dir and all the aircraft folders. But when I load the base 757-200, I just get a black / blank VC. The 777 loads, but eventually something causes P3D2 to crash. The only thing that seems to show up with the tool are the FSX default aircraft.


	IP Logged

fuzzy11 Full Member Offline Posts: 81 Joined: Aug 20^th, 2011	Re: 757 p3D Reply #17 - Dec 8^th, 2013 at 7:58pm	Print Post
	fuzzy11 wrote on Dec 8^th, 2013 at 7:00pm: I installed and setup the v2 migration tool and none of the CS stuff shows up. � So, I tried your "just copy the files" --- Captain Sim dir off the main FSX dir and all the aircraft folders. �But when I load the base 757-200, I just get a black / blank VC. �The 777 loads, but eventually something causes P3D2 to crash. The only thing that seems to show up with the tool are �the FSX default aircraft. � For the 757, I just did a repair for the install and the panel seems to appear ok... Of course, now I don't seem the CS Load Managerin Add-Ons..


	IP Logged

Markoz CS Team Offline Posts: 12370 Location: Victoria, Australia Joined: Apr 24^th, 2009 Gender:	Re: 757 p3D Reply #18 - Dec 8^th, 2013 at 9:00pm	Print Post
	The Load Manager (ACE) DOES NOT work for the P3D installation. Captain Sim don't support their products in P3D, so we have to work it out for ourselves. I copied all the required files (I'm pretty sure I didn't miss any) and my 757 shows up nicely. As macejoj pointed out in his original post, the cockpit /panel is very dark at nigh in both P3D v1.4 and P3D v2. So unless Captain Sim decides to support P3D, we have what we have.

	Mark Fletcher PC: i7 10700K @3.8/5.1GHz \| 64GB DDR4 3200 \| 12GB RTX 4070 Super \| 32" LCD Monitor \| 1TB SSD & 2x2TB SSD \| Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020 15.6" Gaming Laptop: i7 7700HQ \| 32GB DDR4 \| 6GB GTX 1060 \| 256GB SSD & 1TB HDD \| Win 10 Pro 64bit - FSX-SE/P3D4
	IP Logged

macejoj Full Member Offline Posts: 114 Joined: Apr 8^th, 2008	Re: 757 p3D Reply #19 - Feb 27^th, 2014 at 11:34am	Print Post
	Markoz, others, any experience with cs757 in p3D v 2.1. ? all the same like discussed above or some more issues ? many thanks ! regards JM


	IP Logged

macejoj Full Member Offline Posts: 114 Joined: Apr 8^th, 2008	Re: 757 p3D Reply #20 - Feb 27^th, 2014 at 6:30pm	Print Post
	Dear all, I tried to run it in p3dv2.1. I did all the same as with v2, including adding lines to .xml file for sound. (the file has different name now, it is not anymore dll.xml, but exe.xml...??). All is the same BUT pressure packs don't work... So once engines are stopped they cannot be started again - no pressure for starter..... Any idea what can be wrong or where cs757 has this feature and then why it does not work in v2.1 ??? any idea or help would be very welcomed ! thanks JM


	IP Logged

Markoz CS Team Offline Posts: 12370 Location: Victoria, Australia Joined: Apr 24^th, 2009 Gender:	Re: 757 p3D Reply #21 - Feb 28^th, 2014 at 11:30am	Print Post
	macejoj wrote on Feb 27^th, 2014 at 6:30pm: Dear all, I tried to run it in p3dv2.1. I did all the same as with v2, including adding lines to .xml file for sound. (the file has different name now, it is not anymore dll.xml, but exe.xml...??). All is the same BUT pressure packs don't work... So once engines are stopped they cannot be started again - no pressure for starter..... Any idea what can be wrong or where cs757 has this feature and then why it does not work in v2.1 ??? any idea or help would be very welcomed ! thanks JM I just did a test in P3D v2.1, and the 757 caused a CTD when I pressed the DEP/ARR button. Just so you know, I added the entries from the FSX DLL.XML into both the P3D v2.1 DLL.XML that I found in the %AppData%\Lockheed Martin\Prepar3D v2\ folder (after deleting it before installing the 2.1 patch) as well as adding them to EXE.XML. It made no difference. When using the CDU, P3D v2.1 crashed to desktop (CTD). So I can't get the CS 757 working in P3D v2.1.

	Mark Fletcher PC: i7 10700K @3.8/5.1GHz \| 64GB DDR4 3200 \| 12GB RTX 4070 Super \| 32" LCD Monitor \| 1TB SSD & 2x2TB SSD \| Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020 15.6" Gaming Laptop: i7 7700HQ \| 32GB DDR4 \| 6GB GTX 1060 \| 256GB SSD & 1TB HDD \| Win 10 Pro 64bit - FSX-SE/P3D4
	IP Logged

macejoj Full Member Offline Posts: 114 Joined: Apr 8^th, 2008	Re: 757 p3D Reply #22 - Feb 28^th, 2014 at 1:32pm	Print Post
	OH, that is a bad new then..... I cannot get back to p3dv2, so I am stacked now. Do you think it is somehow fixable in future or you believe it is getting too far from v2.1 now so another aircraft which cannot be transferred from FSX..... JM


	IP Logged

fuzzy11 Full Member Offline Posts: 81 Joined: Aug 20^th, 2011	Re: 757 p3D Reply #23 - Feb 28^th, 2014 at 4:44pm	Print Post
	Markoz wrote on Feb 28^th, 2014 at 11:30am: macejoj wrote on Feb 27^th, 2014 at 6:30pm: Dear all, I tried to run it in p3dv2.1. I did all the same as with v2, including adding lines to .xml file for sound. (the file has different name now, it is not anymore dll.xml, but exe.xml...??). All is the same BUT pressure packs don't work... So once engines are stopped they cannot be started again - no pressure for starter..... Any idea what can be wrong or where cs757 has this feature and then why it does not work in v2.1 ??? any idea or help would be very welcomed ! thanks JM I just did a test in P3D v2.1, and the 757 caused a CTD when I pressed the DEP/ARR button. Just so you know, I added the entries from the FSX DLL.XML into both the P3D v2.1 DLL.XML that I found in the %AppData%\Lockheed Martin\Prepar3D v2\ folder (after deleting it before installing the 2.1 patch) as well as adding them to EXE.XML. It made no difference. When using the CDU, P3D v2.1 crashed to desktop (CTD). So I can't get the CS 757 working in P3D v2.1. There is a fix available now. I don't know if it will help: http://forum.avsim.net/topic/436273-no-one-noticed-hot-fix-for-gauges-posted/


	IP Logged

Markoz CS Team Offline Posts: 12370 Location: Victoria, Australia Joined: Apr 24^th, 2009 Gender:	Re: 757 p3D Reply #24 - Mar 1^st, 2014 at 2:04am	Print Post
	fuzzy11 wrote on Feb 28^th, 2014 at 4:44pm: Markoz wrote on Feb 28^th, 2014 at 11:30am: macejoj wrote on Feb 27^th, 2014 at 6:30pm: Dear all, I tried to run it in p3dv2.1. I did all the same as with v2, including adding lines to .xml file for sound. (the file has different name now, it is not anymore dll.xml, but exe.xml...??). All is the same BUT pressure packs don't work... So once engines are stopped they cannot be started again - no pressure for starter..... Any idea what can be wrong or where cs757 has this feature and then why it does not work in v2.1 ??? any idea or help would be very welcomed ! thanks JM I just did a test in P3D v2.1, and the 757 caused a CTD when I pressed the DEP/ARR button. Just so you know, I added the entries from the FSX DLL.XML into both the P3D v2.1 DLL.XML that I found in the %AppData%\Lockheed Martin\Prepar3D v2\ folder (after deleting it before installing the 2.1 patch) as well as adding them to EXE.XML. It made no difference. When using the CDU, P3D v2.1 crashed to desktop (CTD). So I can't get the CS 757 working in P3D v2.1. There is a fix available now. �I don't know if it will help: http://forum.avsim.net/topic/436273-no-one-noticed-hot-fix-for-gauges-posted/ The fix is actually here: http://www.prepar3d.com/forum-5/?mingleforumaction=viewtopic&t=5696 and not in the Avsim forum. But thank you, I got the P3D v2.1 Hotfix link from the Avsim forum nevertheless. Although all the switches that were not working before are now working, unfortunately, the CS 757 still caused a CTD at the same place as it did before (when trying to select DEP/ARR in the CDU). I haven't rebooted my computer yet, which might be needing to be done to get it to work.

	Mark Fletcher PC: i7 10700K @3.8/5.1GHz \| 64GB DDR4 3200 \| 12GB RTX 4070 Super \| 32" LCD Monitor \| 1TB SSD & 2x2TB SSD \| Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020 15.6" Gaming Laptop: i7 7700HQ \| 32GB DDR4 \| 6GB GTX 1060 \| 256GB SSD & 1TB HDD \| Win 10 Pro 64bit - FSX-SE/P3D4
	IP Logged

macejoj Full Member Offline Posts: 114 Joined: Apr 8^th, 2008	Re: 757 p3D Reply #25 - Mar 2^nd, 2014 at 2:14pm	Print Post
	Hi all, after this fix all seems to work well now in v2.1 (of course except of older issues like lighting e.t.c.). Great ! JM


	IP Logged

Markoz CS Team Offline Posts: 12370 Location: Victoria, Australia Joined: Apr 24^th, 2009 Gender:	Re: 757 p3D Reply #26 - Mar 3^rd, 2014 at 1:53am	Print Post
	macejoj wrote on Mar 2^nd, 2014 at 2:14pm: Hi all, after this fix all seems to work well now in v2.1 (of course except of older issues like lighting e.t.c.). Great ! JM I happy for you. It isn't working for me yet. I just downloaded the full P3D v2.1 so I'm going to reinstall the whole thing, instead of v2 and then the v2.1 patch. I'll see if it works then.

	Mark Fletcher PC: i7 10700K @3.8/5.1GHz \| 64GB DDR4 3200 \| 12GB RTX 4070 Super \| 32" LCD Monitor \| 1TB SSD & 2x2TB SSD \| Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020 15.6" Gaming Laptop: i7 7700HQ \| 32GB DDR4 \| 6GB GTX 1060 \| 256GB SSD & 1TB HDD \| Win 10 Pro 64bit - FSX-SE/P3D4
	IP Logged

macejoj Full Member Offline Posts: 114 Joined: Apr 8^th, 2008	Re: 757 p3D Reply #27 - Mar 3^rd, 2014 at 7:24am	Print Post
	crossed fingers, it should work.... JM


	IP Logged

asanal Senior Member Offline Posts: 522 Location: Flemington,NJ USA Joined: Jul 9^th, 2009 Gender:	Re: 757 p3D Reply #28 - Mar 7^th, 2014 at 4:51pm	Print Post
	Mark, How did you install the Fix. Did you extract the �FIX � directly to P3DV2,1 file? Regards Ahmet


	IP Logged

Markoz CS Team Offline Posts: 12370 Location: Victoria, Australia Joined: Apr 24^th, 2009 Gender:	Re: 757 p3D Reply #29 - Mar 8^th, 2014 at 1:08am	Print Post
	asanal wrote on Mar 7^th, 2014 at 4:51pm: Mark, How did you install the Fix. Did you extract the �FIX � directly to P3DV2,1 file? Regards Ahmet I opened the file with WinZip. Then extracted all the files to I:\Prepar3D v2. When asked to overwrite any files, I clicked on Yes to all. Why?

	Mark Fletcher PC: i7 10700K @3.8/5.1GHz \| 64GB DDR4 3200 \| 12GB RTX 4070 Super \| 32" LCD Monitor \| 1TB SSD & 2x2TB SSD \| Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020 15.6" Gaming Laptop: i7 7700HQ \| 32GB DDR4 \| 6GB GTX 1060 \| 256GB SSD & 1TB HDD \| Win 10 Pro 64bit - FSX-SE/P3D4
	IP Logged

asanal Senior Member Offline Posts: 522 Location: Flemington,NJ USA Joined: Jul 9^th, 2009 Gender:	Re: 757 p3D Reply #30 - Mar 9^th, 2014 at 5:11am	Print Post
	Markoz wrote on Mar 8^th, 2014 at 1:08am: asanal wrote on Mar 7^th, 2014 at 4:51pm: Mark, How did you install the Fix. Did you extract the �FIX � directly to P3DV2,1 file? Regards Ahmet I opened the file with WinZip. Then extracted all the files to I:\Prepar3D v2. When asked to overwrite any files, I clicked on Yes to all. Why? I think I made it wrong. I extracted the file like you , into P3D w2,1 , but instead off overwrite any files, I went through each item to item and overwrite them. I hope I didn't make a mess. Today I made a flight in P3D v2.1 without any incident


	IP Logged

fuzzy11 Full Member Offline Posts: 81 Joined: Aug 20^th, 2011	Re: 757 p3D Reply #31 - Mar 11^th, 2014 at 5:11pm	Print Post
	I still get a black VC...I suspect my install is messed up. Any hints? Is ACE working now?


	IP Logged

Markoz CS Team Offline Posts: 12370 Location: Victoria, Australia Joined: Apr 24^th, 2009 Gender:	Re: 757 p3D Reply #32 - Mar 12^th, 2014 at 10:39am	Print Post
	I tried again, but it still isn't working. Like you fuzzy11, I'm thinking I got something wrong. I'm going to attempt to install it to P3Dv2 using the migrator tool next.

	Mark Fletcher PC: i7 10700K @3.8/5.1GHz \| 64GB DDR4 3200 \| 12GB RTX 4070 Super \| 32" LCD Monitor \| 1TB SSD & 2x2TB SSD \| Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020 15.6" Gaming Laptop: i7 7700HQ \| 32GB DDR4 \| 6GB GTX 1060 \| 256GB SSD & 1TB HDD \| Win 10 Pro 64bit - FSX-SE/P3D4
	IP Logged

DillonT4R New Member Offline Posts: 2 Joined: Jan 8^th, 2015	Re: 757 p3D Reply #33 - Jan 8^th, 2015 at 8:59pm	Print Post
	i am having a problem getting it to work as well in my case everything seems operation with the exception if the MFD and FMC... just seem to be grayed out any suggestions? ..

	10912795_10206026904540630_352443105_o.jpg (Attachment deleted \| 100 Downloads )
	IP Logged

Page Index Toggle

Pages: [1]

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board ^Top

CAPTAIN SIM FORUM » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge