I have no idea what is not set correctly. When I´m taxiing and need some more thrust, an alarm goes off, without any message idicating, what´s the problem.
Trim is set but difficult to check because no tool tipp.
Flaps are set.
Autobrake is set.
On the checklist there´s a note Start SWS. What´s this, stall warning? If yes, where is it?

Downloaded the manual from Sim Ops and there are two inside the zip CS737CLASSIC_MANUAL_PART1.pdf and CS737CLASSIC_MANUAL_PART6.pdf. The part 6 is from the 757 not 737. Please correct the zip file.

Thanks

Flaps 5, trim set right in the middle of the green at 5, and she shouldn't complain. Just tried it with default flight.

I have the same problem.  It`s the config warning, but everything is set; trim, flaps etc.
I have reduced the sound file..

Angel of Attack wrote on Sep 2^nd, 2021 at 2:42am:


The brakes are released but the spoilers certainly are a factor often overseen. I think after landing, spoilers are often out and when you increase power to taxi away you will hear the horn.

Most important is trimming and flaps setting for takeoff i think. I recently got it off after setting trim into the right range.


Dan

If you go to TAKEOFF REF page 2/2, enter the CG from the FUEL AND PAYLOAD page, or right click on LSK1R, it will give you the TRIM setting.