Hi, I got the problem with ILS landing.

I have set FMC correctly to land at VTBS RWY 19L, 01R and in WSSS at RWY 02R. The problem I faced after install sp1.4 is that the aircraft not line up at the centre of the runway even it is intercept by localizer. the green mark indicated that aircraft not in the centre as well it is on the left from the middle point.

Since the update I have only ever intercepted in the middle 1/10 flight. So i need to disengage auto pilot to line up in the centre myself and turn on auto pilot for approaching. Sometime need to do manual landing myself.

What I should do to make my aircraft line up at the centre and make a nicely approach and landing?

Well I type wrong Runway so it should be 20R, however I still can't get into centre enough as well. I experienced this problem since install SP 1.4

Have reinstall several time but not work!

Pisitt wrote on Aug 18^th, 2014 at 1:28pm:


Same problem over here. I'm having the same problem with ILS/runway alignment when on final approaches. The aircraft not lined up at the centre of the runway at all five times I have tried on diverse airports, after installing v1.4. [Repair] option didn't work.

Maybe the downloaded file (csx772_1400) is corrupted. I'm downloading right now a fresh one file from the second source.

Seems like all those that have a problem landing on the centerline have a corruption problem, not likely, more like an issue with something else.

Today is getting worst! not even line up and be out of runways on 02L WSSS

I just did a landing using real weather with AS2012, and the 777 landed right in the centre of the runway (dare I say it went perfectly?).
I am not getting the same results with ASN. Recently, every landing using ASN has resulted in an off centre, or off runway landing. When the 777 v1.4 was first released, I am sure that I was not having problems with ASN and the 777.

I know I only use AS2012 for P3D, but that's because (1) ASN for P3D is in BETA and I did not sign up for it, and (2) I don't need to buy AS2012 for P3Dv2 as it already works with it!

I will do some more tests with the 777 with AS2012 and ASN and see how it goes, but I must admit that it isn't looking good for ASN.

I know this is the FSX forum (I exclusively use P3D), but I think it's too quick/easy to lay the blame at ASN's feet. It wouldn't explain why every other payware aircraft I have don't suffer from the same issue. And, without naming the list (it's long and from a diverse set of developers), the CS 777 is the only aircraft I have this issue with. Important to note: even when ASN is not installed and thus not even running...

garrettprs wrote on Oct 9^th, 2014 at 1:06am:

But then someone mentioned earlier that they had the problem in p3d but not fsx.

I hate 'putters sometimes.  

I too am having similar issues with ILS landings, but this is at EVERY airport i land at (US and Europe anyway). It always lands left of center, but still on the runway. It makes no difference if weather is active (Opus) or not, even with clear skies, and no wind. This started when i updated the navigation data, through Navigraph, with 1505 and now 1506. It shows the marker at center on the display, but the aircraft drifts to the left as it gets closer the the runway threshold, while the marker on the MFD still shows at center.  Strange.

I see it's mentioned previously that newer data was 1 degree off or something like that. I simply wrote it off as the issue, and had read this in other post as well, but now it's starting to annoy me to no end. I want it centered....DAMMIT! ¦-P

I also notice this is quite an old post, but still some fairly recent activity (Ralph, Dec. 2014), and still without a solution. Has anybody figured it out?

P.S. - CS 777 + Freight Add-on v1.6