CAPTAIN SIM FORUM - How to change ILS frequency?

(UTC)


	Welcome, Guest. Please Login or Register

CAPTAIN SIM FORUM › 757 Captain III › 757 Captain III - General › How to change ILS frequency?

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

How to change ILS frequency? (Read 2164 times)

OfirVanunu Full Member Offline Posts: 7 Joined: Sep 15^th, 2019	How to change ILS frequency? Sep 15^th, 2019 at 1:23pm	Print Post
	Hello everyone! I bought the 757 about a month ago. I really like the plane on a personal level. But I have some question that is more about the plane. After landing at an ILS approach, I still see the ILS display in PFD. I also attached a picture to better show the problem. I would love to help

	2019-9-15_7-41-28-40.jpg ( 250 KB \| 261 Downloads )
	IP Logged

OfirVanunu Full Member Offline Posts: 7 Joined: Sep 15^th, 2019	Re: Display ILS in PFD after landing Reply #1 - Sep 15^th, 2019 at 1:28pm	Print Post
	I forgot to ask How do I delete the ILS view from PFD


	IP Logged

Markoz CS Team Offline Posts: 12445 Location: Victoria, Australia Joined: Apr 24^th, 2009 Gender:	Re: Display ILS in PFD after landing Reply #2 - Sep 16^th, 2019 at 3:52am	Print Post
	On the ILS CONTROL PANEL (on the AFT AISLE STAND), change the ILS frequency to a frequency not used at that airport. i.e. if I land at MEL (YMML) ILS16, I just change the ILS frequency from 109.70 to 110.70, and the ILS no longer appears on the PFD. Note. I did this after I had already turned the AP OFF (using the big DISENGAGE button on the MCP), and both FD switches OFF, so I'm not sure if you can do it before then..

	Mark Fletcher PC: i7 10700K @3.8/5.1GHz \| 64GB DDR4 3200 \| 12GB RTX 4070 Super \| 32" LCD Monitor \| 1TB SSD + 2TB SSD + 2TB HDD \| Win 11 Pro
	IP Logged

OfirVanunu Full Member Offline Posts: 7 Joined: Sep 15^th, 2019	Re: Display ILS in PFD after landing Reply #3 - Sep 16^th, 2019 at 11:08am	Print Post
	Thank you very much!!!


	IP Logged

OfirVanunu Full Member Offline Posts: 7 Joined: Sep 15^th, 2019	Re: Display ILS in PFD after landing Reply #4 - Sep 16^th, 2019 at 12:55pm	Print Post
	I thought ILS CONTROL PANEL was in the MCP line


	IP Logged

Markoz CS Team Offline Posts: 12445 Location: Victoria, Australia Joined: Apr 24^th, 2009 Gender:	Re: Display ILS in PFD after landing Reply #5 - Sep 16^th, 2019 at 2:30pm	Print Post
	OfirVanunu wrote on Sep 16^th, 2019 at 12:55pm: I thought ILS CONTROL PANEL was in the MCP line When giving instructions, I always use the descriptions as described in the manual (you can see for yourself on page 309 in the ‘757 Captain III’Manual Part II – Aircraft Systems).

	Mark Fletcher PC: i7 10700K @3.8/5.1GHz \| 64GB DDR4 3200 \| 12GB RTX 4070 Super \| 32" LCD Monitor \| 1TB SSD + 2TB SSD + 2TB HDD \| Win 11 Pro
	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board ^Top

CAPTAIN SIM FORUM » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2025. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge