CAPTAIN SIM FORUM - Print Page

CAPTAIN SIM FORUM
757 Captain III >> 757 Captain III - General >> How to change ILS frequency? https://www.captainsim.org/forum/csf.pl?num=1568553796 Message started by OfirVanunu on Sep 15^th, 2019 at 1:23pm

Title: How to change ILS frequency?
Post by OfirVanunu on Sep 15^th, 2019 at 1:23pm

Hello everyone!
I bought the 757 about a month ago. I really like the plane on a personal level.
But I have some question that is more about the plane.
After landing at an ILS approach, I still see the ILS display in PFD.
I also attached a picture to better show the problem.
I would love to help

2019-9-15_7-41-28-40.jpg ( 250 KB | 124 Downloads )

Title: Re: Display ILS in PFD after landing
Post by OfirVanunu on Sep 15^th, 2019 at 1:28pm

I forgot to ask ;D ;D ;D ;D
How do I delete the ILS view from PFD

Title: Re: Display ILS in PFD after landing
Post by Markoz on Sep 16^th, 2019 at 3:52am

On the ILS CONTROL PANEL (on the AFT AISLE STAND), change the ILS frequency to a frequency not used at that airport. i.e. if I land at MEL (YMML) ILS16, I just change the ILS frequency from 109.70 to 110.70, and the ILS no longer appears on the PFD.
Note. I did this after I had already turned the AP OFF (using the big DISENGAGE button on the MCP), and both FD switches OFF, so I'm not sure if you can do it before then..

Title: Re: Display ILS in PFD after landing
Post by OfirVanunu on Sep 16^th, 2019 at 11:08am

Thank you very much!!! :D :D

Title: Re: Display ILS in PFD after landing
Post by OfirVanunu on Sep 16^th, 2019 at 12:55pm

I thought ILS CONTROL PANEL was in the MCP line ;D

Title: Re: Display ILS in PFD after landing
Post by Markoz on Sep 16^th, 2019 at 2:30pm

OfirVanunu wrote on Sep 16^th, 2019 at 12:55pm:

I thought ILS CONTROL PANEL was in the MCP line ;D

When giving instructions, I always use the descriptions as described in the manual (you can see for yourself on page 309 in the ‘757 Captain III’Manual Part II – Aircraft Systems). ;)