Hello guys, got a serious problem with my 777-200LR, I can´t get any lights on, when I hit the "L" Button for example lights just hit on for about a second then turn off again, I´ve tried to add the command line under "lights" in the airplane.cfg as you told to do but I didn´t worked.   Would be so nice if you could help me, such an amazing airplane and lights and I can´t use it   so this is how my airplane.cfg looks like at "lights":

[lights]
light.1 = 1,   40.40,   0.00,  10.55, fx_beacon
light.2 = 1,   12.00,   0.00, -11.00, fx_beacon
light.3 = 3, -102.60,   0.00,   1.75, fx_navwhi
light.4 = 2, -102.90,   0.00,   5.65, fx_strobe
light.5 = 10,  93.00,  -1.80,   3.50, cs777_vclightwhi
light.6 = 10,  93.00,   1.80,   3.50, cs777_vclightwhi
light.7 = 8,   26.50, -23.50,  -3.00, cs777_vclightwhi
light.8 = 8,   26.50,  23.50,  -3.00, cs777_vclightwhi
light.9 = 4,   65.25, 0.0, 11.20, fx_vclighth
light.10 = 7,  -12.00, -28.30,  -8.10, cs777_sf
light.11= 7,  -12.00,  28.30,  -8.10, cs777_sf

Thanks so much 4 your help!!!

Phil

1) The plane is not configured correctly when loaded.  You need to check your overhead panel and make sure you have no faults.  

2) Also, make sure you enable the hydraulic switches  on the panel behind the captain's seat using the F/O view and zoomed in. There are nine of them for the controls to function.


LW

DLH556 wrote on Apr 9^th, 2013 at 9:09pm:


Hydraulic is for the controls....

Check the overhead panel and click on all buttons that say "Fault" for the lights.

so could you or anybody tell exactly how to do, just wanna make sure that I´m doing correctly, cause I still think its a software bug. Thank you!!

Everything on for me but still no lights. The only light that comes on is the dome light nothing else.