Hello guys, got a serious problem with my 777-200LR, I can´t get any lights on, when I hit the "L" Button for example lights just hit on for about a second then turn off again, I´ve tried to add the command line under "lights" in the airplane.cfg as you told to do but I didn´t worked.  :'( Would be so nice if you could help me, such an amazing airplane and lights and I can´t use it  :'( so this is how my airplane.cfg looks like at "lights":

[lights]
light.1 = 1,   40.40,   0.00,  10.55, fx_beacon
light.2 = 1,   12.00,   0.00, -11.00, fx_beacon
light.3 = 3, -102.60,   0.00,   1.75, fx_navwhi
light.4 = 2, -102.90,   0.00,   5.65, fx_strobe
light.5 = 10,  93.00,  -1.80,   3.50, cs777_vclightwhi
light.6 = 10,  93.00,   1.80,   3.50, cs777_vclightwhi
light.7 = 8,   26.50, -23.50,  -3.00, cs777_vclightwhi
light.8 = 8,   26.50,  23.50,  -3.00, cs777_vclightwhi
light.9 = 4,   65.25, 0.0, 11.20, fx_vclighth
light.10 = 7,  -12.00, -28.30,  -8.10, cs777_sf
light.11= 7,  -12.00,  28.30,  -8.10, cs777_sf

Thanks so much 4 your help!!!

Phil

I have a similar problem! in a passanger cabin the light don't work  :(.

I read in a forum that the buttons is Ctrl+L, Shifth+L or L, but when I push this, only start 1 second, and off the lights in all aiplane (wings, cabin..)

Please is posibel help me?

Thanks,
Oriol

1) The plane is not configured correctly when loaded.  You need to check your overhead panel and make sure you have no faults.  

2) Also, make sure you enable the hydraulic switches  on the panel behind the captain's seat using the F/O view and zoomed in. There are nine of them for the controls to function.


LW

THX for the reply, but this seems not to be the problem. After putting on the hydraulic, still the same problem. Seems like a software problem if you ask me. When I hit the "L" button everything lights up but before everything has loaded correctly every light shuts down again. I think the problem is solvable if someone could say how and which lines I should add to my aircraft.cfg in the "LIGHTS" section. I´m using Windows 8 by the way, anyone else with Windows 8 and this problem?! Would be so great if anyone could help me/us out of this!!!  :-/

regards, phil

DLH556 wrote on Apr 9^th, 2013 at 9:09pm:

THX for the reply, but this seems not to be the problem. After putting on the hydraulic, still the same problem. Seems like a software problem if you ask me. When I hit the "L" button everything lights up but before everything has loaded correctly every light shuts down again. I think the problem is solvable if someone could say how and which lines I should add to my aircraft.cfg in the "LIGHTS" section. I´m using Windows 8 by the way, anyone else with Windows 8 and this problem?! Would be so great if anyone could help me/us out of this!!!  :-/ regards, phil

Hydraulic is for the controls....

Check the overhead panel and click on all buttons that say "Fault" for the lights.

Turn on all Generator :) that was my problem :D

so could you or anybody tell exactly how to do, just wanna make sure that I´m doing correctly, cause I still think its a software bug. Thank you!!

OK I got it. Finally it was the Generator which was switched off, sry for my "noobism", really looked like a software bug (cause everything works correctly, except the lights?!) . Thanks 4 ya help everybody!!! =)  ;)

Everything on for me but still no lights. The only light that comes on is the dome light nothing else.