All right, thanks everybody, today I've made my first autoland, without any crash, with my 767-300 !

Thanks a lot for your help, thanks to you the landing was wonderful !

I just noticed one problem : the touchdown was very violent, the plane doesn't seems to flare, all the gears touched the runway at the same time ! Think to the passengers !

So, what was wrong with the flare ? �
Have I missed something ??

A picture is worth a thousand words, so maybe you could post a screenshot?

You know you are below the glide slope somehow, right?  You should have the little arrow on the right at the top of the PFD.  If you keep going it doesn't eventually start to creep down?

well i just made 2 flights,

Flight 1: MMAA-MMAA
from the same airport, SID then STAR, and the flight was pretty well with a flawless autoland!.

flight 2: MMMX-MMAA
the flight was pretty fine until STAR begun, the flight route ended, and just go crazy to any way!, and had �to do it manually, and just when I get to the centerline, the same way of flight 1, the ILS frec is not tuned even when i select it from the FMC, and i dont get any arrow, nor loc �or app function. �hope some one help me!

You do not need to select the three CMD buttons. Only one needs to be ON. Once the ILS is captured and you are about 5 - 7 nm from the runway threshold, all three CMD buttons turn ON and the AUTOLAND 3 light comes on.

Put simply. One CMD button MUST be ON, the others come on AUTOMATICALLY. You don't need to do anything except press the LOC and APP buttons at the appropriate times to capture the ILS and G/S.

Hope this helps.

Mark

I did a perfect ILS approach in the Fair Weather settinging in FSX and a perfect autoland . I wanted to try it again, because it looked so great! Unfortunatly it did the rocking thing once I made the weather bad . So I had to disengage the autopilot.

Alex

Probably not, but it's just my guess. You can though.

Hi,

I finally autoland after loading the Boeing 767 cleared for take off (KSEA) file provided with the plain. So I did setup the FMC on the runaway of course not the best moment � and fly to Vancouver and Guess what I landed with autoland 3.

So I have to learn how to start the 767 following the correct procedure and autoland should work. I had a lot of help from Paul Kawalec to find this out.

So I have to make the next step in simming by learning the proper startup procedures etc . I'm working on a written howto, but maybe someone can point me at a good one already made.
I know that on youtube there are some wonderfull video's but a written procedure, with lots of screen shots �is easier to followto perform the startup procedure in FSX