CAPTAIN SIM FORUM - DONE - APU doesn't work

(UTC)


	Welcome, Guest. Please Login or Register

CAPTAIN SIM FORUM › 737 Classic › 737 Classic - Tech issues › DONE - APU doesn't work

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

DONE - APU doesn't work (Read 2138 times)

centurion88 Full Member Offline Posts: 15 Joined: Jun 11^th, 2019	DONE - APU doesn't work Apr 1^st, 2021 at 3:16pm	Print Post
	External power and all fuel pumps needed have been switched on, and the fuel tanks are all full, but the APU just doesn't work when the APU switch is on the start position. I wonder whether it is a bug or just because of my mistake.


	IP Logged

FelixTch Full Member Offline Posts: 27 Location: Israel Joined: Dec 5^th, 2020 Gender:	Re: APU doesn't work Reply #1 - Apr 1^st, 2021 at 4:03pm	Print Post
	I also had this problem, I found out that a long press on start will start the APU, the moment the needle start to move i released the start, wonder if it a bug or a real life operation.


	IP Logged

EY CS Team Offline Posts: 347 Location: Canada Joined: Nov 9^th, 2005 Gender:	Re: APU doesn't work Reply #2 - Apr 1^st, 2021 at 8:51pm	Print Post
	How to start the APU


	WWW YouTube IP Logged

Ryan Vince Full Member Offline Posts: 13 Joined: Apr 27^th, 2020	Re: APU doesn't work Reply #3 - Apr 1^st, 2021 at 11:01pm	Print Post
	I have been having this issue where you need to hold it for far longer than 2 seconds for it to start


	IP Logged

Markoz CS Team Offline Posts: 12360 Location: Victoria, Australia Joined: Apr 24^th, 2009 Gender:	Re: APU doesn't work Reply #4 - Apr 2^nd, 2021 at 12:05am	Print Post
	I also had this problem for quite some time, but holding the APU switch in the START position for 2-3 seconds works for me now.

	Mark Fletcher PC: i7 10700K @3.8/5.1GHz \| 64GB DDR4 3200 \| 12GB RTX 4070 Super \| 32" LCD Monitor \| 1TB SSD & 2x2TB SSD \| Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020 15.6" Gaming Laptop: i7 7700HQ \| 32GB DDR4 \| 6GB GTX 1060 \| 256GB SSD & 1TB HDD \| Win 10 Pro 64bit - FSX-SE/P3D4
	IP Logged

EY CS Team Offline Posts: 347 Location: Canada Joined: Nov 9^th, 2005 Gender:	Re: APU doesn't work Reply #5 - Apr 2^nd, 2021 at 3:18pm	Print Post
	https://www.youtube.com/watch?v=5QmMNmgyhus&t=30s


	WWW YouTube IP Logged

Alexiyi New Member Offline Posts: 4 Joined: Jun 22^nd, 2021	Re: DONE - APU doesn't work Reply #6 - Jul 11^th, 2021 at 5:21pm	Print Post
	I notoced a bug eith APU. It does not use fuel during. I stood at the gate during 10 minutes with APU on and 5 tons of fuel and it did not reduce. The same digits all the time.


	IP Logged

Angel of Attack Full Member Offline Posts: 249 Joined: Dec 15^th, 2019	Re: DONE - APU doesn't work Reply #7 - Jul 16^th, 2021 at 1:33pm	Print Post
	Alexiyi wrote on Jul 11^th, 2021 at 5:21pm: I notoced a bug eith APU. It does not use fuel during. I stood at the gate during 10 minutes with APU on and 5 tons of fuel and it did not reduce. The same digits all the time. While in 1007 APU now uses fuel, it doesn't take fuel from "left fuel manifold" when AC pumps are on, according to FCOM v2,12.20- APU fuel feed. In FCOMv1 NP.21, there is a Note: If fuel is loaded in the center tank, position the left center tank fuel pump switch ON to prevent a fuel imbalance before takeoff. However in 1007, even if I only turned the left center tank pump on, APU still only use fuel from left main tank. In some case, we also use right main tank pump via crossfeed to feed APU, this also could not be done in CS's 733.


	IP Logged

EY CS Team Offline Posts: 347 Location: Canada Joined: Nov 9^th, 2005 Gender:	Re: DONE - APU doesn't work Reply #8 - Feb 4^th, 2022 at 10:40am	Print Post
	v.1008


	WWW YouTube IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board ^Top

CAPTAIN SIM FORUM » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge