Visit Captain Sim web site  
  Welcome, Guest. Please Login or Register

 

Page Index Toggle Pages: 1 Send TopicPrint
Thrust levers oscillate (take 2) (Read 817 times)
Louis Vallance
Full Member
*
Offline



Posts: 19
Joined: May 23rd, 2020
Thrust levers oscillate (take 2)
May 25th, 2020 at 7:29pm
Print Post  
I wasn't sure whether to add this to the existing thread about jittering throttles (https://www.captainsim.org/forum/csf.pl?num=1588159007/1#1) or to create a new thread, but I decided on the latter.

In my first thread (https://www.captainsim.org/forum/csf.pl?num=1590334559) I noted that the thrust levers oscillate when the thrust mode is IDLE A/T. I was directed to KConlon's post and my thread was locked without getting the chance to explain that my problem is different, so here we are.

My thrust levers are not jittering as you would see whenever a hardware throttle creates undesirable inputs. As you can see from my first video (https://youtu.be/1mzplHw20oI) the levers are NOT jittering, rather they are moving smoothly back and forth in a periodic motion.

I created a second video (https://youtu.be/uOOW-MN5v6E) which shows that the thrust levers move back and forth even in SPD A/T mode. At the 18 second mark, I physically pulled my hardware throttle back to idle. At the 22 second mark I also pressed the F1 key. As you can see, neither actions stop the oscillations from occurring.

I disabled active sky and disconnected my throttle and the issue persists exactly as illustrated in the aforementioned videos.

This is a bit of an immersion killer which I've only ever seen in the CS 767. I wonder if anyone else has noticed the same problem?

Best regards,

Louis
  

Louis Vallance

P3D v5 (no shaders) | i9-9900K | RTX 2080 | 32GB | Win 10
Back to top
 
IP Logged
 
Motormike
Full Member
*
Offline



Posts: 6
Joined: Dec 24th, 2017
Re: Thrust levers oscillate (take 2)
Reply #1 - May 26th, 2020 at 7:08pm
Print Post  
Same here
  
Back to top
 
IP Logged
 
Louis Vallance
Full Member
*
Offline



Posts: 19
Joined: May 23rd, 2020
Re: Thrust levers oscillate (take 2)
Reply #2 - May 27th, 2020 at 9:19am
Print Post  
The same issue can be seen from another user here: https://youtu.be/u2D8MaOX_7M?t=28
  

Louis Vallance

P3D v5 (no shaders) | i9-9900K | RTX 2080 | 32GB | Win 10
Back to top
 
IP Logged
 
767pilot
Full Member
*
Offline



Posts: 24
Joined: May 26th, 2020
Re: Thrust levers oscillate (take 2)
Reply #3 - May 28th, 2020 at 11:39am
Print Post  
i've noticed similar behavior of the throttle.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
 
  « Board Index ‹ Board  ^Top