Visit Captain Sim web site  
  Welcome, Guest. Please Login or Register

 

Page Index Toggle Pages: 1 Send TopicPrint
Fast overturning rotary knobs (Read 102 times)
Alpolex
Full Member
*
Offline



Posts: 37
Joined: Sep 23rd, 2018
Fast overturning rotary knobs
Mar 2nd, 2019 at 1:25pm
Print Post  
Fast overturning rotary knobs

Every rotary knob (VOR/DME, each on the MCP, ILS Cours selector)is over-sensitive. For example, while turning the Heading Selector Knob on the MCP it starts to overturn and overshooting, increasing it's rate of change independently.

That's the same issue for every rotary knob on the flight deck. Especially changes in the ALT/HDG/CRS lead regulary to overshoot the ALT to the maximum/minimum value its capable of.
Seems to be a general problem, as standard P3D aircraft nor any other add-on aircraft has the same problem.
  
Back to top
 
IP Logged
 
Alpolex
Full Member
*
Offline



Posts: 37
Joined: Sep 23rd, 2018
Re: Fast overturning rotary knobs
Reply #1 - Mar 13th, 2019 at 10:54pm
Print Post  
Guys, Feedback?
  
Back to top
 
IP Logged
 
Captain Sim
CS Team
*
Offline



Posts: 2475
Joined: Nov 7th, 2005
Re: Fast overturning rotary knobs
Reply #2 - Mar 16th, 2019 at 12:58pm
Print Post  
Thanks for input but we need at least several upvotes to consider a suggestion.
  
Back to top
IP Logged
 
Markoz
Beta Team
*
Offline



Posts: 11276
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: Fast overturning rotary knobs
Reply #3 - Mar 17th, 2019 at 1:54am
Print Post  
I would also like them to be adjusted so they don't spin too fast.
  

Mark Fletcher



PC: i7 6700K @ 4.0GHz | Corsair H80i Liquid Cooling | 32GB DDR4 | 6GB GTX1060 Xtreme Gaming | 27" LCD Monitor | 1x2TB SSHD, 2x2TB HDD, 1x4TB HDD, 1x275GB SSD | Win 10 Pro 64 - FSX, FSX-SE, P3Dv3.4 & P3Dv4.2
15.6" Gaming Laptop: i7 7700HQ | 16GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE & P3Dv4.2
Back to top
 
IP Logged
 
Alpolex
Full Member
*
Offline



Posts: 37
Joined: Sep 23rd, 2018
Re: Fast overturning rotary knobs
Reply #4 - Mar 19th, 2019 at 8:47pm
Print Post  
Quote:
Thanks for input but we need at least several upvotes to consider a suggestion.


Holy...
That's not a question of upvotes.
A rotary knob has a constant rate of turn. Yours does not.
Please fix it!
  
Back to top
 
IP Logged
 
WittjeZ
Full Member
*
Offline



Posts: 6
Joined: Apr 28th, 2018
Re: Fast overturning rotary knobs
Reply #5 - Yesterday at 3:42pm
Print Post  
+1
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
 
  « Board Index ‹ Board  ^Top