CAPTAIN SIM FORUM - Autopilot disconnect warning (chaseplane)

(UTC)


	Welcome, Guest. Please Login or Register

CAPTAIN SIM FORUM › 757 Captain III › 757 Captain III - General › Autopilot disconnect warning (chaseplane)

‹ Previous Topic | Next Topic ›

Pages: 1

Autopilot disconnect warning (chaseplane) (Read 1609 times)

apoincon Full Member Offline Posts: 12 Joined: Jan 11^th, 2016	Autopilot disconnect warning (chaseplane) Feb 13^th, 2019 at 4:40pm	Print Post
	When I load the aircraft and try to set up, the Autopilot disconnect warning light and autothrottle warning lights are on and I do not know how to turn them off. Any advice? Adam Poincon


	IP Logged

Colvale Senior Member Offline Posts: 253 Joined: Jun 23^rd, 2011 Gender:	Re: Autopilot and autothrottle problem Reply #1 - Feb 13^th, 2019 at 6:20pm	Print Post
	apoincon wrote on Feb 13^th, 2019 at 4:40pm: When I load the aircraft and try to set up, the Autopilot disconnect warning light and autothrottle warning lights are on and I do not know how to turn them off. Any advice? Adam Poincon Elaborate on 'when I load the......'. You mean when you select from the outset within P3D, or FSX, or .......? E.g, ' Change vehicle'.or when you have already changed vehicle to CS757-200?


	IP Logged

Markoz CS Team Offline Posts: 12360 Location: Victoria, Australia Joined: Apr 24^th, 2009 Gender:	Re: Autopilot and autothrottle problem Reply #2 - Feb 14^th, 2019 at 1:22am	Print Post
	apoincon wrote on Feb 13^th, 2019 at 4:40pm: When I load the aircraft and try to set up, the Autopilot disconnect warning light and autothrottle warning lights are on and I do not know how to turn them off. Any advice? I saw this exact problem on the 757-200 PW yesterday (FSX-SE). I took of, pressed the AP button, turned on LNAV & VNAV, and the AT worked fine (up to tha point, I could still see the AT Disconnect warning on the EICAS Display screen).

	Mark Fletcher PC: i7 10700K @3.8/5.1GHz \| 64GB DDR4 3200 \| 12GB RTX 4070 Super \| 32" LCD Monitor \| 1TB SSD & 2x2TB SSD \| Win 11 Pro - FSX/FSX-SE/P3D3/P3D4/P3D5/P3D6/MSFS2020 15.6" Gaming Laptop: i7 7700HQ \| 32GB DDR4 \| 6GB GTX 1060 \| 256GB SSD & 1TB HDD \| Win 10 Pro 64bit - FSX-SE/P3D4
	IP Logged

Colvale Senior Member Offline Posts: 253 Joined: Jun 23^rd, 2011 Gender:	Re: Autopilot and autothrottle problem Reply #3 - Feb 14^th, 2019 at 8:14am	Print Post
	Markoz wrote on Feb 14^th, 2019 at 1:22am: still see the AT Disconnect warning on the EICAS Display screen) I too see that but I just ignore it as I know the A/T is on. I can visually see the switch is on and the aircraft is in A/T mode.


	IP Logged

apoincon Full Member Offline Posts: 12 Joined: Jan 11^th, 2016	Re: Autopilot and autothrottle problem Reply #4 - Feb 14^th, 2019 at 2:08pm	Print Post
	I solved that problem myself but now. I see another problem when I go through the cold & dark procedure. When I get to the point of turning on the YAW DAMPER, it does not come on. Instead the ILS 2D WINDOW pops up. Every click turns on then off. This happens with both yaw damper. Adam


	IP Logged

apoincon Full Member Offline Posts: 12 Joined: Jan 11^th, 2016	Re: Autopilot and autothrottle problem Reply #5 - Feb 14^th, 2019 at 6:48pm	Print Post
	Problem solved again. It was a Chaseplane Prolem. I deleted my overhead view in Chaseplane and and redid it and no problem now. I found that instead of just a hot spot over the yaw damper switch, the hot spot was over the entire left overhead panel. Don't know how this could have happened.


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›