Visit Captain Sim web site  
  Welcome, Guest. Please Login or Register

 

Page Index Toggle Pages: 1 Send TopicPrint
CTD (crash to desktop) (Read 365 times)
Captain Sim
CS Team
*
Offline



Posts: 2478
Joined: Nov 7th, 2005
CTD (crash to desktop)
Dec 24th, 2018 at 5:13pm
Print Post  
Crash To Desktop issues are very system-specific and difficult to reproduce/track, so please provide at least the following info:

1. Your system specs.

2. Screenshot or a text copy of the full error message if any.

3. How long was the flight before the CTD?

4. Position/flight stage at the CTD? (e.g. FL200 VNAV descend)

5. What was the last thing you did (e.g. turned smth ON/OFF, used the sim menu etc) before CTD?

6. After the CTD, try to reproduce the situation and SAVE the scenario - press ;

7. ZIP all 3 files of the saved scenario: 
xxxxx.fxml
xxxxx.cs.config
xxxxx.wx
(located in %USERPROFILE%\Documents\Prepar3D v4 Files\  folder)

8. Attach the ZIP archive to your post.

Thank you.
  
Back to top
IP Logged
 
spreilly
Full Member
*
Offline



Posts: 23
Location: Virginia Beach, VA
Joined: Jan 23rd, 2011
Gender: Male
Re: CTD (crash to desktop)
Reply #1 - Feb 2nd, 2019 at 2:38pm
Print Post  
Whenever I now load up the 757 on 1.302, my sim works fine for a few minutes, then starts to lose textures, then crashes with no error. Everything works fine with the default F-22.


1. System Specs:
Code
Select All
OS Name	Microsoft Windows 10 Home
Version	10.0.17134 Build 17134
Other OS Description 	Not Available
OS Manufacturer	Microsoft Corporation
System Name	DESKTOP-V99UJU3
System Manufacturer	System manufacturer
System Model	System Product Name
System Type	x64-based PC
System SKU	SKU
Processor	Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz, 4201 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date	American Megatrends Inc. 1205, 11-May-18
SMBIOS Version	3.0
Embedded Controller Version	255.255
BIOS Mode	UEFI
BaseBoard Manufacturer	ASUSTeK COMPUTER INC.
BaseBoard Model	Not Available
BaseBoard Name	Base Board
Platform Role	Desktop
Secure Boot State	Off
PCR7 Configuration	Binding Not Possible
Windows Directory	C:\WINDOWS
System Directory	C:\WINDOWS\system32
Boot Device	\Device\HarddiskVolume2
Locale	United States
Hardware Abstraction Layer	Version = "10.0.17134.471"
User Name	DESKTOP-V99UJU3\Shane
Time Zone	Eastern Standard Time
Installed Physical Memory (RAM)	32.0 GB
Total Physical Memory	31.9 GB
Available Physical Memory	23.1 GB
Total Virtual Memory	36.7 GB
Available Virtual Memory	23.8 GB
Page File Space	4.75 GB
Page File	C:\pagefile.sys
Kernel DMA Protection	Off
Virtualization-based security	Not enabled
Device Encryption Support	Reasons for failed automatic device encryption: TPM is not usable, PCR7 binding is not supported, Hardware Security Test Interface failed and device is not InstantGo, Un-allowed DMA capable bus/device(s) detected, TPM is not usable
Hyper-V - VM Monitor Mode Extensions	Yes
Hyper-V - Second Level Address Translation Extensions	Yes
Hyper-V - Virtualization Enabled in Firmware	No
Hyper-V - Data Execution Protection	Yes 



2. P3D v4 Crashes without an error, Event Viewer gives this:
Code
Select All
Faulting application name: Prepar3D.exe, version: 4.4.16.27077, time stamp: 0x5bfdbb35
Faulting module name: KERNELBASE.dll, version: 10.0.17134.441, time stamp: 0x428de48c
Exception code: 0xc0020001
Fault offset: 0x000000000003a388
Faulting process id: 0x2f3c
Faulting application start time: 0x01d4bb026bff075e
Faulting application path: D:\Program Files\Lockheed Martin\Prepar3D v4\Prepar3D.exe
Faulting module path: C:\WINDOWS\System32\KERNELBASE.dll
Report Id: 1a4300c2-60fd-4f01-888b-01c8344fba21
Faulting package full name:
Faulting package-relative application ID:  



3. Ground, approximately 2 minutes after loading
Also had this crash on approach to KSAN after a 5 hour flight

4. Ground

5. Toggle lights and cycle views. Also happened when I switched variants
  

Prepar3D_v4_Files.zip ( 20 KB | 8 Downloads )

P3D v4:
Back to top
 
IP Logged
 
Captain Sim
CS Team
*
Offline



Posts: 2478
Joined: Nov 7th, 2005
Re: CTD (crash to desktop)
Reply #2 - Feb 2nd, 2019 at 3:33pm
Print Post  
spreilly wrote on Feb 2nd, 2019 at 2:38pm:
Whenever I now load up the 757 on 1.302, my sim works fine for a few minutes, then starts to lose textures, then crashes with no error.

Sounds like a video issue. Try with minimal P3D4 graphics settings.
  
Back to top
IP Logged
 
spreilly
Full Member
*
Offline



Posts: 23
Location: Virginia Beach, VA
Joined: Jan 23rd, 2011
Gender: Male
Re: CTD (crash to desktop)
Reply #3 - Feb 2nd, 2019 at 7:10pm
Print Post  
Other addons work fine though, but I'll try it
  

P3D v4:
Back to top
 
IP Logged
 
tui757pilot
New Member
Offline



Posts: 1
Joined: Mar 5th, 2019
Re: CTD (crash to desktop)
Reply #4 - Mar 5th, 2019 at 6:52pm
Print Post  
im having a problem when i try to start up my sim the CS 757 will crash my sim and its getting really stressful please can I have some help
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
 
  « Board Index ‹ Board  ^Top