Hello to all,

on my last longer flight with the 767-3 from EDDF to ‎LEPA (PMI) with good weather conditions, (with 1 hour reserve fuel on board, and plane 75% loaded with passengers, cargo compt. only 1/4 loaded) i had a hard landing at LEPA and damaged my landing gear due to a landing with MINUS - 600 ft/min!!

Now i need the vRef Speeds for the 767-3 where can i find them, im not sure where the flight manual of captain sim 767-3 is, can you help me please?

the problem might also be that the view from the outside of cockpit is not adjusted properly, i need to put the under edge of the window to up, to be able to see the runway even with 5 deg nose up on landing, with standard adjustment you dont see the RWY when your nose is 1 or 5 deg up before touchdown.

Back to the topic i primarily look for correct vRef Speeds for the 767-3 Captain Sim.

thx

Markoz wrote on Feb 4^th, 2018 at 3:03am:


-> i wanted to know the vref speeds for manual landing, so on last flight i landed in LEPA manually (and was too slow, this had lead to a very hard landing, i used fs passengers they were not amused at all

+ i got Malus points for this flight

well i found another way for correct Vref speeds

i make yesterday a Training Session for the FMC (preflight Initialization) with the Original Boeing CBT from 1990`s (worked only in Windows 95 on a virtual machine), but now i know much more than before: i need to type the aircraft ZWF in kg, + fuel reserves in kg in [1/1000] for ex.: 5,4 Reserve fuel are 5400kg then with the correct weight, the FMC calculates the correct vref speeds (or like in the lesson, i put the vref speeds for T/O v1,vR,V2 on my own from a pre-calculated card (F/O job) into the FMC.