Visit Captain Sim web site  
  Welcome, Guest. Please Login or Register

 

Page Index Toggle Pages: 1 2 [3]  Send TopicPrint
 25 GSX (Read 7991 times)
karlt
Full Member
*
Offline



Posts: 4
Location: McDonough Ga
Joined: Jan 18th, 2015
Gender: Male
Re: GSX
Reply #30 - Jan 2nd, 2019 at 4:27am
Print Post  
After much research I may have a solution as to why ATC and the engines won't start...Is there a limit to the APU run time? I start the APU (not ground power) after loading cold and dark. after say twenty minutes, I'm not finished programing, GSX etc.. the APU run light is still illuminated but ATC is gone so the engines don't start. This is a dumb question, but how (and how long) can I use external power before switching to the APU? On some add ons the APU run time seams to be unlimited or an actual external power unit can be seen (animated) externally.
  
Back to top
 
IP Logged
 
Markoz
Beta Team
*
Offline



Posts: 11173
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: GSX
Reply #31 - Jan 2nd, 2019 at 11:20am
Print Post  
I don't know how long the APU power lasts as I've never used it long enough to find out, but it should last as long as the APU is running.

Maybe you should do what I do. I use Ground Power, and External Air, until I'm ready to do the pushback, and engine start. I start the APU, then request the pushback, and start the engines during the pushback.
  

Mark Fletcher



PC: i7 6700K @ 4.0GHz | Corsair H80i Liquid Cooling | 32GB DDR4 | 6GB GTX1060 Xtreme Gaming | 27" LCD Monitor | 1x2TB SSHD, 2x2TB HDD, 1x4TB HDD, 1x275GB SSD | Win 10 Pro 64 - FSX, FSX-SE, P3Dv3.4 & P3Dv4.2
15.6" Gaming Laptop: i7 7700HQ | 16GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE & P3Dv4.2
Back to top
 
IP Logged
 
Matthew Kitchen
New Member
Offline



Posts: 2
Joined: Jan 4th, 2019
GSX Issues
Reply #32 - Jan 7th, 2019 at 6:21pm
Print Post  
I'm having a few issues with GSX with my CS 757-200. When I want to use GSX for my aircraft, the programming of where everything is doesnt match. For example, when the stairs extend to the door, instead of stopping at the bottom of the door they stop extending about half way up the door and it doesnt match. Wonder if anyone has a patch so that it corrects this issue Smiley
  
Back to top
 
IP Logged
 
Markoz
Beta Team
*
Offline



Posts: 11173
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: GSX Issues
Reply #33 - Jan 8th, 2019 at 1:48am
Print Post  
Ahhh. It only happens on the RR model for me!

On checking in the C:\Users\<username>\AppData\Roaming\Virtuali\Airplanes\CS_B757-200-III_RB535C, there is a gsx.cfg file there. In fact, the CS_B757-200-III_RB535C is the only aircraft listed, even though I have tried different RR versions. If I use a different RR version, the alignment of the stairs is even worse. Sad

Anyway. To fix this problem, you're going to have to do the alignment yourself, unless someone has already done that, and is willing to share their gsx.cfg files.
  

Mark Fletcher



PC: i7 6700K @ 4.0GHz | Corsair H80i Liquid Cooling | 32GB DDR4 | 6GB GTX1060 Xtreme Gaming | 27" LCD Monitor | 1x2TB SSHD, 2x2TB HDD, 1x4TB HDD, 1x275GB SSD | Win 10 Pro 64 - FSX, FSX-SE, P3Dv3.4 & P3Dv4.2
15.6" Gaming Laptop: i7 7700HQ | 16GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE & P3Dv4.2
Back to top
 
IP Logged
 
Ryz
Full Member
*
Offline



Posts: 32
Location: KCLT
Joined: Jan 24th, 2015
Gender: Male
Re: GSX Issues
Reply #34 - Jan 10th, 2019 at 5:51am
Print Post  
Markoz wrote on Jan 8th, 2019 at 1:48am:
Ahhh. It only happens on the RR model for me!

On checking in the C:\Users\<username>\AppData\Roaming\Virtuali\Airplanes\CS_B757-200-III_RB535C, there is a gsx.cfg file there. In fact, the CS_B757-200-III_RB535C is the only aircraft listed, even though I have tried different RR versions. If I use a different RR version, the alignment of the stairs is even worse. Sad

Anyway. To fix this problem, you're going to have to do the alignment yourself, unless someone has already done that, and is willing to share their gsx.cfg files.


Please read this whole post.

I posted my RR gsx entry. Are you using the one I posted?
I know that my gsx cfg file works in fsx.

If you're using mine make sure the folder gsx.cfg is in matches the folder name in the simobjects/airplanes folder. You can check this very quickly. Load the aircraft in question and open the gsx aircraft editor. At the top it'll say one of three things. I dont remember the exact wording but you can figure it out.
1, using data from aircraft.cfg(you do not want this)
2, using gsx internal data(fsdt made this and could possibly be bugged)
3, using data from %appdata%(I dont remember the exact path)

The first one will ALWAYS be broken. that one won't have the door codes or proper alignment.
The second one was made by fsdt and they could have made a mistake. You can override it by making your own or placing a gsx.cfg file in the correct folder.
The third is a user created one.

Keep in mind that internal gsx aircraft data are not kept in the appdata folder. They're probably stored elsewhere or are embedded in the actual program.

You can create the folders in the appdata gsx folder. But they HAVE to match the simobjects/airplanes folder.

Each aircraft has to have its own entry. Mark, the reason that the others are worse is because they are most definitely using aircraft.cfg data. Every single aircraft has to have it's own gsx.cfg. some are handled internally. but the ones that are not will have to have it's own file. Luckily all of the 757s share the door placement and door codes. The 4d will have an extra entry but it too is shared among the other 4d. So you only need to do it twice. Then just create the folder in the appdata folder and copy the gsx.cfg folder from one a paste it into it's own folder. Again the folder HAS to match the simobjects/airplanes folder. The reason the PW works is because its supported internally. The RR is not.



As for the question about apu and engine start.  Make sure theres air going to the apu. Also make sure that the needle is around 40. You can turn the packs off temporarily. if there's not enough air the engines wont start. Regarding the apu, the apu uses fuel. I'm pretty sure the fuel it uses is from the left and right tanks. If theres no fuel the apu wont start. Also I've noticed that if you change fuel amount while the apu is running it will cut off. Simply set the apu switch to off then start it again and it will work. The apu has no time limit. I've left it running on a 6 hour flight before. It will stay running until you turn it off or all the fuel is used.
  

Back to top
IP Logged
 
Markoz
Beta Team
*
Offline



Posts: 11173
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: GSX
Reply #35 - Jan 10th, 2019 at 11:21pm
Print Post  
Once I set up GSX for a specific aircraft/model, I always place the gsx.cfg in the actual aircraft folder in the sim.
i.e. D:\Prepar3D v4\SimObjects\Airplanes\CS_B757-200-III_RB535C
  

Mark Fletcher



PC: i7 6700K @ 4.0GHz | Corsair H80i Liquid Cooling | 32GB DDR4 | 6GB GTX1060 Xtreme Gaming | 27" LCD Monitor | 1x2TB SSHD, 2x2TB HDD, 1x4TB HDD, 1x275GB SSD | Win 10 Pro 64 - FSX, FSX-SE, P3Dv3.4 & P3Dv4.2
15.6" Gaming Laptop: i7 7700HQ | 16GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE & P3Dv4.2
Back to top
 
IP Logged
 
Ryz
Full Member
*
Offline



Posts: 32
Location: KCLT
Joined: Jan 24th, 2015
Gender: Male
Re: GSX
Reply #36 - Yesterday at 11:04pm
Print Post  
Markoz wrote on Jan 10th, 2019 at 11:21pm:
Once I set up GSX for a specific aircraft/model, I always place the gsx.cfg in the actual aircraft folder in the sim.
i.e. D:\Prepar3D v4\SimObjects\Airplanes\CS_B757-200-III_RB535C



That's the old way of doing it. As far as I know that no longer works. At least it didn't last time I tried it. press the windows key and R at the same time and type in %appdata% and press enter. Go to the virtuali folder and open the airplanes folder. the airplane folders in there is where the gsx.cfg files go. If the airplanes folder doesn't exist you can create it then create the RR folde inside virtuali\airplanes if needed. You can also create the folder by opening the aircraft editor with the RR loaded and changing something.

Sorry I haven't gotten back to you, been busy.
  

Back to top
IP Logged
 
Markoz
Beta Team
*
Offline



Posts: 11173
Location: Victoria, Australia
Joined: Apr 24th, 2009
Gender: Male
Re: GSX
Reply #37 - Today at 1:54am
Print Post  
I still had only the one aircraft listed in the %AppData%\Virtuali\Airplanes (C:\Users\<username>\AppData\Roaming\Virtuali\Airplanes) folder:

CS_B757-200-III_RB535C

It was only after using the GSX editor for the CS_B737-100 (P3Dv4), that that the CS_B737-100 folder appeared, so now I have two aircraft there.

After reading the instructions, I found the following:


GSX_manual.pdf, page 51

The GSX.CFG file

An airplane can be customized by creating a file named GSX.CFG, that needs to be placed
in the airplane Root folder, the same that contains the aircraft.cfg file. For
example, if you want to customize the default Boeing 747-400, you will have to create
a GSX.CFG file in the FSX\SimObjects\Airplanes\B747_400 folder.



I know it says FSX\SimObjects\Airplanes\B747_400 folder, but after moving the CS_B757-200-III_RB535C gsx.cfg from the C:\Users\<username>\AppData\Roaming\Virtuali\Airplanes\CS_B757-200-III_RB535C folder, to the D:\Prepar3D v4\SimObjects\Airplanes\CS_B757-200-III_RB535C folder, GSX worked fine with that model, like it had when the gsx.cfg was in the C:\Users\<username>\AppData\Roaming\Virtuali\Airplanes\CS_B757-200-III_RB535C folder. So I have to assume that it works the same as it used to.
  

Mark Fletcher



PC: i7 6700K @ 4.0GHz | Corsair H80i Liquid Cooling | 32GB DDR4 | 6GB GTX1060 Xtreme Gaming | 27" LCD Monitor | 1x2TB SSHD, 2x2TB HDD, 1x4TB HDD, 1x275GB SSD | Win 10 Pro 64 - FSX, FSX-SE, P3Dv3.4 & P3Dv4.2
15.6" Gaming Laptop: i7 7700HQ | 16GB DDR4 | 6GB GTX 1060 | 256GB SSD & 1TB HDD | Win 10 Pro 64bit - FSX-SE & P3Dv4.2
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 2 [3] 
Send TopicPrint
 
  « Board Index ‹ Board  ^Top