Hi,
Maybe Markoz or other experient guys can help me regarding

Doppler
Is it all in the manual or is there a tutorial here? I haven't been able to even turn it on

DME
How can I make it work? Its impossible to make a flight without DME marking, since Im flying via VOR and have to cheat by checking the fs map everytime.

rolling
I find that the 707 seems to be a bit unstable, in level autopilot cruise alt FL320 IAS 300 kts it here and again starts a disturbing rolling left and right, then it stabilizes only to start again moments later

ALT SET KNOB
Isnt there an alt set knob where you can put your desired alt and the autopilot will level once reached?

turbulence - this is not 707 related
OK, this turbulence thing is grossly exaggerated.
Don't you hate it when you realize people thought smart to have turbulence and they add an exaggerated turbulence effect. We go from not having an effect (which is bad), to having an exaggerated and unrealistic effect (which is worse)

Cause in a long haul flight of 4 hours or more, you might get a bad day, but most of the flights will only have 2 or 3 episodes of turbulence not lasting more than 2 minutes each.

Im experiencing turbulence evry single minute minute, by flying online with IVAO, also have ezca, don't know which is causing turbulence and where to reduce its effects? Thedy are totally exaggerated in both intensity and frequency.

The problem with the turbulence, like you say, it seems exaggerated. I checkmarked (turned ON) the "Disable turbulence and thermal effects on aircraft", found in Settings > Display > Weather.

I created a PDF of the Doppler Tutorial (printed to a PDF file) that used to be in the Customer Support KB#5968, before they added the info that is in the 707 Manual Part II. You can download it from here: 707 Captain Doppler System Quick Start Tutorial if you want.

I found it to be of very helpful and I am so glad I added it into a PDF while it was still there!

The instructions in manual2 are more in depth, so eventually you should read through them. They can be found in ‘707 Captain’ FLIGHT MANUAL Part II – Aircraft and Systems (cs707_manual2.pdf) pages 20-26.

Kapitan asked: By the way, do you navigate often with Doppler? or Ins? which do you prefer? Was the Doppler standard in 707s ?

INS came later & only special 707's were fitted with these units. The domestic (non ocean crossing) planes used dual VOR's for just about all navigation. It was rare to even use the NDB in the U.S. except for LOM I.D. In Europe, there were more NDB legs, but those planes had DNS so that acted as a primary navigation system since the NDB's were a pain and on long legs to the south of the Mediterranean, NDB's were not very reliable and mostly pointed to thunderstorms.  

With high altitude VOR's, you could fly long legs with out much effort.

Lou

hello!
how can I change the value of OFFSET MILES?

the knob is not active

The following is what can be found in the PDF file (I used print to PDF to create it) that can be got from the link above. I have no idea why it would give an error. If you want, I can email the PDF, in a ZIP file, to anyone who wants it (size is 168KB).

DOPPLER TUTORIAL:

1. Q: DOPPLER SYSTEM Quick Start tutorial.
A: 1. Switch Function Selector Switch on DOPPLER CONTROL UNIT (overhead) to ON position



2. Make sure:
- Control Switch (#1, P01, NAV CONTROLLER) is in OFF or STBY position (ref. Manual Part II,
p.52)
- Stage Selector (#9, P01, NAV CONTROLLER) is in middle position (ref. Manual Part II, p.52)
3. Set distance and course your need at A and B unit using Mileage Set Knobs (#6,#8) and Course
Selector (#11,#13)



4. Set Control Switch (#1) to MAN or AUTO position.



5. Set Stage Selector (#9) to A or B position.



6. Route will be shown on the map.



7. Put Autopilot Mode Selector to NAV position - aircraft will follow the route.



Note: If Control Switch is in MAN position, just one leg - A or B will appear on the map (depends on
Stage Selector position).
From: 707 Captain / Systems Programming (gauges) (QID 5968)

THE ABOVE IS FROM THE ORIGINAL KB #5968

This what KB #5968 says now:
Quote: