(UTC)
  Visit Captain Sim web site  
  Welcome, Guest. Please Login or Register

  

  CAPTAIN SIM FORUM › 767 Captain (FSX) › 767 Captain (FSX) › V-One Callout Gauge for Boeing 767
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
V-One Callout Gauge for Boeing 767 (Read 6855 times)
fsxpaul
Ex Member


V-One Callout Gauge for Boeing 767
Sep 8th, 2012 at 6:41pm
Print Post  
This is a First Officer (F/O) call-out XML gauge specifically for the CS (Captain Sim) 757 and 767. This gauge is not a substitute for correctly programming the CDU/FMS.

Now available in the Avsim library. Search for:
V-One Callout for Boeing 757/767

V-One Call-Out Sounds and Features:
Take-Off:
  • V1
  • Rotate
  • Positive Rate
  • Gear-Up
  • Flaps-Up
  • Slats Retract
Approach:
  • Slats Extended
  • Gear Down
  • Flaps 20
  • Flaps 25
  • Flaps 30
Landing:
  • Spoilers Deployed*
  • Auto Thrust Available
  • 80 knots
  • 60 knots
Always Available:
  • Auto Pilot Engage
  • Spoilers Deployed**
  • Altitude Alert
[* Auto spoilers must be armed]
[** Call-Out occurs when spoilers set to full (100%)]

Trim and CG Display:
  • Fuel used is displayed in either LB or KG based on FSX unit settings.
  • Current aircraft Center of Gravity (CG) is displayed.
  • Current Trim Units are displayed.
  
Back to top
 
IP Logged
 
R. Aranda S.
Full Member
*
Offline



Posts: 206
Location: MMMX
Joined: Jul 21st, 2011
Gender: Male
Re: V-One Callout Gauge for Boeing 767
Reply #1 - Sep 9th, 2012 at 2:02am
Print Post  
Installed, tested, loved it.

Thank you very much for this!
  
R. Aranda S.

C152/C172/C310/B762
Back to top
 
IP Logged
 
CoolP
Senior Member
*
Offline



Posts: 2568
Joined: Jan 17th, 2010
Gender: Male
Re: V-One Callout Gauge for Boeing 767
Reply #2 - Sep 9th, 2012 at 6:26am
Print Post  
Me too, especially the CG display comes in handy while the callouts then add to the atmosphere. Great work.
  
Back to top
 
IP Logged
 
NaMcO
Ex Member
*
Re: V-One Callout Gauge for Boeing 767
Reply #3 - Sep 9th, 2012 at 11:17am
Print Post  
Do we have to program the gauge, or it may remain closed and will do the callouts automatically?
  
Back to top
 
IP Logged
 
fsxpaul
Ex Member


Re: V-One Callout Gauge for Boeing 767
Reply #4 - Sep 9th, 2012 at 12:24pm
Print Post  
NaMcO wrote on Sep 9th, 2012 at 11:17am:
Do we have to program the gauge, or it may remain closed and will do the callouts automatically?


You will need to progam the vspeeds before take-off and then the 'Vspeed Input' can be closed.

All callouts will happen automatically throughout the remainder of your flight.
  
Back to top
 
IP Logged
 
NaMcO
Ex Member
*
Re: V-One Callout Gauge for Boeing 767
Reply #5 - Sep 9th, 2012 at 12:41pm
Print Post  
Sounds good (no pun intended!), i'll give it a try  Cheesy
  
Back to top
 
IP Logged
 
Silverbeard
Full Member
*
Offline



Posts: 48
Joined: Sep 11th, 2010
Re: V-One Callout Gauge for Boeing 767
Reply #6 - Sep 11th, 2012 at 7:52pm
Print Post  
Hi tried to install the gauge but ran into trouble. I find that several existing entries in my panel Config do not correlate with yours. eg.-
[Window01]size_mm=48, 288MY Config is = [Window01]size_mm64, 256
IN Window 06 I have [Window06]size_mm=447, 360
I have now come to a halt . Any help or advice would be appreciated.
  
[img]http://www.captainsim.com/user/dl/b757/752_users_banner.gif[img]
Back to top
 
IP Logged
 
fsxpaul
Ex Member


Re: V-One Callout Gauge for Boeing 767
Reply #7 - Sep 11th, 2012 at 11:05pm
Print Post  
Silverbeard wrote on Sep 11th, 2012 at 7:52pm:
Hi tried to install the gauge but ran into trouble. I find that several existing entries in my panel Config do not correlate with yours. eg.-
[Window01]size_mm=48, 288MY Config is = [Window01]size_mm64, 256
IN Window 06 I have [Window06]size_mm=447, 360
I have now come to a halt . Any help or advice would be appreciated.


Here's what you need for your panel.cfg (change/add only red items):

[Window01]
size_mm= 64, 288
...
gauge07=...!iExit, �0, 256, 32, 32
...
gauge16=/V-One!v1_Icon, 0, 224, 32, 32

[Window06]
Background_color=16,16,16
size_mm= 447, 725
position=2
visible=0
zorder=85
ident=12105
gauge00=...!cdu, 0, 0, 447, 699
gauge01=/V-One!CG_Trim,0,699

Hope this helps.
  
Back to top
 
IP Logged
 
Silverbeard
Full Member
*
Offline



Posts: 48
Joined: Sep 11th, 2010
Re: V-One Callout Gauge for Boeing 767
Reply #8 - Sep 12th, 2012 at 3:07pm
Print Post  
Brilliant!

Thank's very much.
  
[img]http://www.captainsim.com/user/dl/b757/752_users_banner.gif[img]
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board  ^Top   

CAPTAIN SIM FORUM » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge