Hi all.

As at least one person at CS is already aware, I've been asked to write a review of Weapon, so, typically, I start by trying to do something it doesn't seem to want to.

The problem is that I am trying to attach multiple versions of the same type of weapon to a single aircraft and, when it gets above two weapons, they all stop working.

To be more precise, the weapon is the M60C (closest to a Browning .303 currently in the pack) and the aircraft is a Supermarine Spitfire with four guns per wing, hence total 8.

I managed to change the gun positions so that they fired into the middle of the Spitfire model's already included gunsight easily enough and if I add two guns to one wing, or one gun each to both wings, they work fine with a fire pattern of 1+2. However if I add any more than that at all, say two to each wing, none of that particular group can be fired unless I drop the pattern back down to two weapons, be that 1+2, 1+4, 2+3 or any other combination of maximum two guns.

Is this an intentional limit of the product at the moment, or am I messing up somewhere? I can post the xml file if necessary (it's a lot shorter than usual, as I took out everything other than the M60Cs to make life easier...)

Thanks.

Ian P.

Hi YoYo

The line to add more M60C guns the line that deals with that is in BOLD:

<Weapon>
  <!-- weapon sub-type section. unlimited number of -->
  <Gun>M60C</Gun>
  <!-- weapon sub-type name. must match GunInfo>Gun>Name -->
  <Shell>M60C Bullet</Shell>
  <!-- shell name. must match GunInfo>Shell>Name -->
  <Unlimited>0</Unlimited>
  <!-- unlimited ammo fire. 1-yes, 0-no -->
  <Station name="Nose" params="0,9,0,0,-0.039,0,200" />
  <!-- Station position (x,y,z) meters, angle of incidence, ammo units quantity -->
  <Mode name="AUTO" shotrate="10" setshots="0" sequence="1" />
  <!-- fire mode section. unlimited number of. name= dispayed on HUD in weapon info string. -->
  <Mode name="X3" shotrate="10" setshots="3" sequence="1" />
  <Mode name="SINGL" shotrate="10" setshots="1" sequence="1" />
  <DefaultMode>AUTO</DefaultMode>
  <!-- default fire mode. Any from the list above  -->
</Weapon>

Just add a new line for each gun. Like this:

<Weapon>
  <!-- weapon sub-type section. unlimited number of -->
  <Gun>M60C</Gun>
  <!-- weapon sub-type name. must match GunInfo>Gun>Name -->
  <Shell>M60C Bullet</Shell>
  <!-- shell name. must match GunInfo>Shell>Name -->
  <Unlimited>0</Unlimited>
  <!-- unlimited ammo fire. 1-yes, 0-no -->
  <Station name="Nose" params="0,9,0,0,-0.039,0,200" />
  <Station name="Nose" params="0,9,0,0,-0.039,0,200" />
  <!-- Station position (x,y,z) meters, angle of incidence, ammo units quantity -->
  <Mode name="AUTO" shotrate="10" setshots="0" sequence="1" />
  <!-- fire mode section. unlimited number of. name= dispayed on HUD in weapon info string. -->
  <Mode name="X3" shotrate="10" setshots="3" sequence="1" />
  <Mode name="SINGL" shotrate="10" setshots="1" sequence="1" />
  <DefaultMode>AUTO</DefaultMode>
  <!-- default fire mode. Any from the list above  -->
</Weapon>

Hope this helps.

Mark

Ian P wrote on Feb 9^th, 2011 at 1:19pm:

Hi Ian.

Try this:

   <WeaponInfo>
       <!-- aircraft dependent weapon settings -->
       <Weapon>
           <Gun>M60C</Gun>
           <Shell>M60C Bullet</Shell>
           <Unlimited>0</Unlimited>
           <Station name="Left wing 1" params="-2.5,0,-0.5,0,0,0,300" />
           <Station name="Left wing 2" params="-3.5,0,-0.5,0,0,0,300" />
           <Station name="Right wing 1" params="2.5,0,-0.5,0,0,0,300" />
           <Station name="Right wing 2" params="3.5,0,-0.5,0,0,0,300" />
           <Mode name="AUTO" shotrate="5" setshots="0" sequence="1,2,3,4" />
           <DefaultMode>AUTO</DefaultMode>
       </Weapon>
   </WeaponInfo>

I think this might fix your sequence for firing.

Mark

Hi folks,

Alex: That side of it is fine... A single or dual gun works fine, whether it is a cannon or a machine gun. it's just that only two can ever fire at once.

Mark: I tried that and only one gun fired, presumably because that's code to fire weapon one individually, then two individually, then three.... It's what is listed for individual rockets or missiles in the standard XML file, which backs up what I found. The only default weapon which fires multiple mounts simultaneously was the gSH cannon, which used the "1+2" code - hence that being the one I'm using.

I'll go back and try 1,2,3,4 again later, copying the code from one of the other weapons options, but I'm 99.9% sure I got the code right last time and it only ever fired the #1 machine gun.

Cheers,

Ian P.

This xml provides 4 synchronous M60.
As you can see there are no problems in the weapon, it's all about correct modifications.