Visit Captain Sim web site  
  Welcome, Guest. Please Login or Register

 

Page Index Toggle Pages: 1 Send TopicPrint
Viewpoint 2D panel (Read 3288 times)
que280
New Member
Offline



Posts: 1
Joined: Dec 10th, 2009
Viewpoint 2D panel
Dec 10th, 2009 at 11:49pm
Print Post  
I just bought 757 and have noticed that the viewpoint in the 2d panel is a bit off. For example, I found a object (catering truck) at the same heigth as the cockpit windows and the view forward in the 2d panel, the top of the truck is just below the bottom of the window, however if I change the view to the left,right,forward left, etc..  the view is about 2-3 feet below the top of the truck. Its almost as if the forward view is at a height of 10 ft and the others are at 5 ft.I tried to change the views in the aircraft.cfg and panel.cfg but I am having no luck. Can someone help if what I described isn't too confusing?

Thanks
Quinn
  
Back to top
 
IP Logged
 
zlin142
New Member
Offline



Posts: 4
Joined: Dec 12th, 2009
Re: Viewpoint 2D panel
Reply #1 - Dec 12th, 2009 at 5:16pm
Print Post  
Yeah, my problem is very similar. I would like to bring up the 'standard' views in VC, because now I can't see anything when I pressed the viewing angles on numpad. Sad
I hope somebody can help us to solve these problems...
  
Back to top
 
IP Logged
 
B737200
New Member
Offline



Posts: 3
Joined: Dec 13th, 2009
Re: Viewpoint 2D panel
Reply #2 - Dec 13th, 2009 at 7:23pm
Print Post  
Back-up your original panel.cfg and do this:

Go into the panel.cfg and in the [views] section find the entries describing the 2d views like VIEW_REAR_LEFT_WINDOWS etc.
you have to change the eyepoint coordinates, these entries: VIEW_REAR_LEFT_EYE

I copied the ones of the Forward view (the first view entered), I also changed the zoom value to 0.75.

Now this will probably overlay the 2d views onto the VC, so delete the fixed window entries above the [views] section you were just editing. I had already deleted them so I'm not sure if they will be overlayed. MAKE SURE to leave the ones for the passenger window views there. They are described as PASS_RIGHT an PASS_LEFT.

I'd send you my .cfg file but I'm not sure if its against the rules so unless I get permission I'd rather not, don't won't to get in trouble especially since its my first post.

Hope this helps.
  
Back to top
 
IP Logged
 
zlin142
New Member
Offline



Posts: 4
Joined: Dec 12th, 2009
Re: Viewpoint 2D panel
Reply #3 - Dec 15th, 2009 at 12:28am
Print Post  
B737200 wrote on Dec 13th, 2009 at 7:23pm:
Back-up your original panel.cfg and do this:


I don't think it's would affect to any copyrights, so please send me your panel.cfg by PM or by e-mail. Or seems to be easier if just copy here, isn't?  Roll Eyes

Many many thanks in advance for your kindly help!  Smiley
  
Back to top
 
IP Logged
 
B737200
New Member
Offline



Posts: 3
Joined: Dec 13th, 2009
Re: Viewpoint 2D panel
Reply #4 - Dec 15th, 2009 at 1:19pm
Print Post  
Well I suppose you are right, just so used to hearing copyright this and don't do this and don't do that that I got a bit worried. Not saying Copyrights aren't important, on the contrary, but at times it can get a bit hard to follow what the rules actually are.

I'll paste the stuff that way others can find it, if I send it to you they won't be able to, besides I've come across pasting on these forums.

Ok so you have to change these entries:

(These are the original ones, just making sure I'm clear on what to change)

Fixed Window50=PASS_LEFT
Fixed Window51=PASS_RIGHT
Fixed Window52=45 View
Fixed Window53=90 View
Fixed Window54=180 View
Fixed Window55=225 View
Fixed Window56=270 View
Fixed Window57=315 View

[VIEWS]
VIEW_FORWARD_WINDOWS=MAIN_PANEL,RADIO_STACK_PANEL,60,115
VIEW_FORWARD_ZOOM=0.75
VIEW_FORWARD_DIR=11.0,0.0,0.0
VIEW_FORWARD_EYE=0.0, 2.0, 0.0

VIEW_DOWN_WINDOWS=MAIN_PANEL,RADIO_STACK_PANEL,60,115
VIEW_DOWN_ZOOM=0.5
VIEW_DOWN_DIR=0.0,0.0,0.0
VIEW_DOWN_EYE=0,2,0

VIEW_REAR_LEFT_WINDOWS=12112
VIEW_REAR_LEFT_ZOOM=0.5
VIEW_REAR_LEFT_DIR=0.0,0.0,225.0
VIEW_REAR_LEFT_EYE=-0.5,0,1

VIEW_LEFT_WINDOWS=12113
VIEW_LEFT_ZOOM=0.5
VIEW_LEFT_DIR=0.0,0.0,270.0
VIEW_LEFT_EYE=-0.5,0,1

VIEW_RIGHT_WINDOWS=12110
VIEW_RIGHT_ZOOM=0.5
VIEW_RIGHT_DIR=0.0,0.0,90.0
VIEW_RIGHT_EYE=1.0,0,1

VIEW_REAR_RIGHT_WINDOWS=12110
VIEW_REAR_RIGHT_ZOOM=0.5
VIEW_REAR_RIGHT_DIR=0.0,0.0,90.0
VIEW_REAR_RIGHT_EYE=1.0,0,1

VIEW_REAR_WINDOWS=12111
VIEW_REAR_ZOOM=0.5
VIEW_REAR_DIR=-40.0,0.0,0.0
VIEW_REAR_EYE=1,0,1

VIEW_FORWARD_LEFT_WINDOWS=12114
VIEW_FORWARD_LEFT_ZOOM=0.5
VIEW_FORWARD_LEFT_DIR=0.0,0.0,315.0
VIEW_FORWARD_LEFT_EYE=-0.5,0,1

VIEW_FORWARD_RIGHT_WINDOWS=12109
VIEW_FORWARD_RIGHT_ZOOM=0.5
VIEW_FORWARD_RIGHT_DIR=0.0,0.0,45.0
VIEW_FORWARD_RIGHT_EYE=0.9,0,1

VIEW_FORWARD_UP_ZOOM=0.47
VIEW_FORWARD_UP_DIR=-46.0,0.0,50.0
VIEW_FORWARD_UP_EYE=0.15,1.9,0

VIEW_AUX_00_WINDOWS=12108
VIEW_AUX_00_ZOOM=0.5
VIEW_AUX_00_DIR=10.0, 0.0, 85.0
VIEW_AUX_00_EYE=0.5, 3.0, -27

VIEW_AUX_01_WINDOWS=12107
VIEW_AUX_01_ZOOM=0.5
VIEW_AUX_01_DIR=10.0, 0.0, 245.0
VIEW_AUX_01_EYE=-2.3, 2.0, -11


To This:

Fixed Window50=PASS_LEFT
Fixed Window51=PASS_RIGHT


[VIEWS]
VIEW_FORWARD_WINDOWS=MAIN_PANEL,RADIO_STACK_PANEL,60,115
VIEW_FORWARD_ZOOM=0.75
VIEW_FORWARD_DIR=11.0,0.0,0.0
VIEW_FORWARD_EYE=0.0, 2.0, 0.0

VIEW_DOWN_WINDOWS=MAIN_PANEL,RADIO_STACK_PANEL,60,115
VIEW_DOWN_ZOOM=0.5
VIEW_DOWN_DIR=0.0,0.0,0.0
VIEW_DOWN_EYE=0,2,0

VIEW_REAR_LEFT_WINDOWS=12112
VIEW_REAR_LEFT_ZOOM=0.75
VIEW_REAR_LEFT_DIR=0.0,0.0,225.0
VIEW_REAR_LEFT_EYE=0.0, 2.0, 0.0

VIEW_LEFT_WINDOWS=12113
VIEW_LEFT_ZOOM=0.75
VIEW_LEFT_DIR=0.0,0.0,270.0
VIEW_LEFT_EYE=0.0, 2.0, 0.0

VIEW_RIGHT_WINDOWS=12110
VIEW_RIGHT_ZOOM=0.75
VIEW_RIGHT_DIR=0.0,0.0,90.0
VIEW_RIGHT_EYE=0.0, 2.0, 0.0

VIEW_REAR_RIGHT_WINDOWS=12110
VIEW_REAR_RIGHT_ZOOM=0.75
VIEW_REAR_RIGHT_DIR=0.0,0.0,90.0
VIEW_REAR_RIGHT_EYE=0.0, 2.0, 0.0

VIEW_REAR_WINDOWS=12111
VIEW_REAR_ZOOM=0.75
VIEW_REAR_DIR=-40.0,0.0,0.0
VIEW_REAR_EYE=0.0, 2.0, 0.0

VIEW_FORWARD_LEFT_WINDOWS=12114
VIEW_FORWARD_LEFT_ZOOM=0.75
VIEW_FORWARD_LEFT_DIR=0.0,0.0,315.0
VIEW_FORWARD_LEFT_EYE=0.0, 2.0, 0.0

VIEW_FORWARD_RIGHT_WINDOWS=12109
VIEW_FORWARD_RIGHT_ZOOM=0.75
VIEW_FORWARD_RIGHT_DIR=0.0,0.0,45.0
VIEW_FORWARD_RIGHT_EYE=0.0, 2.0, 0.0

VIEW_FORWARD_UP_ZOOM=0.47
VIEW_FORWARD_UP_DIR=-46.0,0.0,50.0
VIEW_FORWARD_UP_EYE=0.15,1.9,0

VIEW_AUX_00_WINDOWS=12108
VIEW_AUX_00_ZOOM=0.5
VIEW_AUX_00_DIR=10.0, 0.0, 85.0
VIEW_AUX_00_EYE=0.5, 3.0, -27

VIEW_AUX_01_WINDOWS=12107
VIEW_AUX_01_ZOOM=0.5
VIEW_AUX_01_DIR=10.0, 0.0, 245.0
VIEW_AUX_01_EYE=-2.3, 2.0, -11


Let me know how it works out.
  
Back to top
 
IP Logged
 
zlin142
New Member
Offline



Posts: 4
Joined: Dec 12th, 2009
Re: Viewpoint 2D panel
Reply #5 - Dec 15th, 2009 at 5:11pm
Print Post  
B737200 wrote on Dec 15th, 2009 at 1:19pm:
Well I suppose you are right, just so used to hearing copyright this and don't do this and don't do that that I got a bit worried. Not saying Copyrights aren't important, on the contrary, but at times it can get a bit hard to follow what the rules actually are.

I'll paste the stuff that way others can find it, if I send it to you they won't be able to, besides I've come across pasting on these forums.

.
.
.

Let me know how it works out.


I just arriving from a short test flight after panel.cfg editing, and I must say...ooohhh, yeahhh!!! Smiley This is what I want exactly! Superb! All my dreams come true, a big thanx to you for the help!  Cool
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
 
  « Board Index ‹ Board  ^Top