CAPTAIN SIM FORUM - AutoPilot major problem v2.2

(UTC)


	Welcome, Guest. Please Login or Register

CAPTAIN SIM FORUM › 757 Captain › 757 version 1.x-2.x (FS9 ONLY) › AutoPilot major problem v2.2

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: [1]

AutoPilot major problem v2.2 (Read 9171 times)

jonny Full Member Offline Posts: 14 Joined: Jun 9^th, 2009	AutoPilot major problem v2.2 Sep 25^th, 2009 at 12:39pm	Print Post
	i just tried out v2.2 and took off and right after activating vnav and l nav i activated the AP and it doesnt stop turning it turns towards the logged route but then keeps swinging left and right what is thiss?!!?!?!?!?!


	IP Logged

jonny Full Member Offline Posts: 14 Joined: Jun 9^th, 2009	Re: AutoPilot major problem v2.2 Reply #1 - Sep 29^th, 2009 at 9:22am	Print Post
	so let me explain the problem again after T/O i activate the AP on LNAV AND VNAV, this also happens if its on HDG and speed + Alt on the MCP anyways when i activate the AP the a/c starts banking at 45deg angle and then starts swing left to right etc when its on route and it doesnt stop im not the only one with the problem , so you will be helping a few other people, please let me know what i can do to fix it without reverting back to 2.1


	IP Logged

Thunderbird New Member Offline Posts: 2 Joined: Oct 1^st, 2009	Re: AutoPilot major problem v2.2 Reply #2 - Oct 1^st, 2009 at 4:09pm	Print Post
	I just got this plane and I have the same problems, with crazy rolls when A/P is engaged and A/T not working at all; I just sent a Ticket to the Customer support. I'll trray to modify the Aircraft.cfg as the FSX version owners have to do in order to solve this kind of problems. This is the first plane getting me in trouble like that and I have a lot of add-ons.......... Bye


	IP Logged

Thunderbird New Member Offline Posts: 2 Joined: Oct 1^st, 2009	Re: AutoPilot major problem v2.2 Reply #3 - Oct 2^nd, 2009 at 10:25pm	Print Post
	Well I got the solution: you just have to calibrate all the axis with FSUICP....and everything works fine, A/P, A/T...without rolling and with very good approachs.... Bye


	IP Logged

jetter Full Member Offline Posts: 5 Joined: Sep 11^th, 2009	Re: AutoPilot major problem v2.2 Reply #4 - Oct 2^nd, 2009 at 11:46pm	Print Post
	Ok, how do you calibrate the axis with FSUIPC?


	IP Logged

jonny Full Member Offline Posts: 14 Joined: Jun 9^th, 2009	Re: AutoPilot major problem v2.2 Reply #5 - Oct 3^rd, 2009 at 5:44pm	Print Post
	thanks thunderbird ill try it out! and if it works boy oh boy id be happy!


	IP Logged

jonny Full Member Offline Posts: 14 Joined: Jun 9^th, 2009	Re: AutoPilot major problem v2.2 Reply #6 - Oct 3^rd, 2009 at 7:20pm	Print Post
	it worked!! thanks thunderbird


	IP Logged

phoenix Full Member Offline 757 enthusiast Posts: 74 Location: Moscow, UUEE Joined: Nov 22^nd, 2005 Gender:	Re: AutoPilot major problem v2.2 Reply #7 - Oct 7^th, 2009 at 8:26pm	Print Post
	jonny, let me know, how you do it? Thanks in advance.

	Best regards, Stanislav&&http://www.avsim.su/&&&&;
	WWW Skype/VoIP ICQ IP Logged

giel Full Member Offline Posts: 24 Joined: Jul 18^th, 2008	Re: AutoPilot major problem v2.2 Reply #8 - Oct 8^th, 2009 at 7:30am	Print Post
	i'm also curious, can someone explain how it ios done in FSUIPC (never used it before)


	IP Logged

jonny Full Member Offline Posts: 14 Joined: Jun 9^th, 2009	Re: AutoPilot major problem v2.2 Reply #9 - Oct 15^th, 2009 at 8:07am	Print Post
	sorry it took me a while havent checked the forums, so go to Modules in fs2004 when you load a flight from the top bar, select FSUIPC and you select to calibrate the axis, but you please NOTE: you need the full registered version of FSUIPC, having it unregistered is not enough


	IP Logged

phoenix Full Member Offline 757 enthusiast Posts: 74 Location: Moscow, UUEE Joined: Nov 22^nd, 2005 Gender:	Re: AutoPilot major problem v2.2 Reply #10 - Oct 15^th, 2009 at 11:06am	Print Post
	jonny, could you please advice for details, what we shall do (calibbrate)

	Best regards, Stanislav&&http://www.avsim.su/&&&&;
	WWW Skype/VoIP ICQ IP Logged

jonny Full Member Offline Posts: 14 Joined: Jun 9^th, 2009	Re: AutoPilot major problem v2.2 Reply #11 - Oct 17^th, 2009 at 6:01pm	Print Post
	-Open FS2004 - Start a flight any aircraft - when flight loads, on top Bar next to File, EDit ,Flight etc CLICK on MODULES and select FSUIPC PLS note FSUIPC needs to installed, THE FULL VERSION WHICH HAS TO BE BOUGHT not free version - while in FSUIPC window go to the Joystick tab and configure your joystick from there. - to configure select appropriate flight movement(yaw,pitch , roll) and move the joystick the its maximum if you still havent understood let me know I'll go into even more detail


	IP Logged

giel Full Member Offline Posts: 24 Joined: Jul 18^th, 2008	Re: AutoPilot major problem v2.2 Reply #12 - Oct 21^st, 2009 at 11:16am	Print Post
	Thanks jonny it worked


	IP Logged

capman New Member Offline Posts: 3 Joined: Feb 1^st, 2010	Re: AutoPilot major problem v2.2 Reply #13 - Feb 1^st, 2010 at 10:56pm	Print Post
	Hi! Help, please. I'm in the same trouble. Swinging left/right. Unable to play. I have tried this fsuipc thing, but not works! I have the latest (registered properly) version (3.9.6.) tried to resetup the joy parameters (maybe I make it in a wrong order; Reset then move the joy, then press the Set buttons) (?) but the plane still swinging... Are you sure guys that this is fsuipc related trouble? Thanks for help!


	IP Logged

col.pattex New Member Offline Posts: 3 Joined: Jan 20^th, 2009	Re: AutoPilot major problem v2.2 Reply #14 - Feb 2^nd, 2010 at 2:36pm	Print Post
	capman wrote on Feb 1^st, 2010 at 10:56pm: Hi! Help, please. I'm in the same trouble. Swinging left/right. Unable to play. I have tried this fsuipc thing, but not works! I have the latest (registered properly) version (3.9.6.) tried to resetup the joy parameters (maybe I make it in a wrong order; Reset then move the joy, then press the Set buttons) (?) but the plane still swinging... � Are you sure guys that this is fsuipc related trouble? Thanks for help! I quote from another topic: Hi I was having the same probs with violent rocking (at random) and found a slight alteration to 1 line in the aircraft.cfg has virtually eliminated the problem for me. I backed up a copy of the cfg before altering, then I reduced the number in the AP_Roll_controlstep line (red) the lower the number the more stable she becomes. I don't know how this impacts on other aspects of the 757 but it works for me. [Custom Autopilot] AP_Roll_speed=3.92 AP_Roll_window=1.8 AP_Roll_controlstep=1500 //AP_Roll_controlstep=2850 AP_Roll_mincontrol=-15884 AP_Roll_maxcontrol=15884 AP_Pitch_speed=0.3 AP_Pitch_window=1.8 this works fine for me too. my baby flies smoothly... hope this helps Col. Pattex


	IP Logged

capman New Member Offline Posts: 3 Joined: Feb 1^st, 2010	Re: AutoPilot major problem v2.2 Reply #15 - Feb 2^nd, 2010 at 4:37pm	Print Post
	Thank You. But... I'm getting to fall in desperate... I'm on W7x64. What about this?


	IP Logged

capman New Member Offline Posts: 3 Joined: Feb 1^st, 2010	AP swings the plane left to right. Reply #16 - Feb 2^nd, 2010 at 2:06pm	Print Post
	Hi there! I found this problem at others too, so continued an other topic, but it seems it is better to start a new one... Perhaps it is a known problem (but unfortunately the solutions I found didn't work) therefore most of you know an other/the right answer. When I turn on the autopilot the plane start to banking left to right then back, throttles not works also V/S... � � I read that the reason is the fsuipc. I have the latest (and properly registered) version, I have tried to setup my stick in that, but the mentioned trouble is still alive. � Maybe I'm doing the calibration in a wrong way, could somebody tell me what could be a problem? Is it absolutely sure that this "bug" is related to fsuipc? Thanks in advance!


	IP Logged

Page Index Toggle

Pages: [1]

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board ^Top

CAPTAIN SIM FORUM » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge