Hi all!!!

Does someone knows how to add correctly the "Shockwave 3D Lights Redux for fs9" to the Captainsim's B757-200/300???

Tks in advance

Fábio

I just bought that add-on, but haven't tried it yet.  I'm interested in adding it to CptSim's 757-200 also since I'll be using this so much now.

Firstly I dont have this addon, but there's a section in your aircraft.cfg:
[LIGHTS]       
light.0 = 1,   0.70,   0.00, -3.90, fx_beaconh
light.1 = 1,  40.00,   0.30, 10.57, fx_beaconh
light.2 = 4,  67.00,   2.00,  5.19, fx_vclightwhi
light.3 = 4,  67.00,   -2.00,  5.19, fx_vclightwhi
light.4 = 5,  15.35,   7.35,  0.10, cs757_land
light.5 = 5,  15.35,  -7.35,  0.10, cs757_land
light.6 = 7, -17.00, -47.00,  2.50, cs757_sf
light.7 = 7, -17.00,  47.00,  2.50, cs757_sf
light.8 = 8, 13.40, -17.47, 3.40, cs757_edge
light.9 = 8, 13.40,  17.47, 3.40, cs757_edge

These are your landing lights. You will have to add your parameters in those lines. If your lights-addon is just an effect file then just replace cs757_land with the files name.
Hope thisll help

I have shockwave 3D light fsx,  NOT RELUX edition. can that be add to my CS757 and other addon craft?
if yes, am I right, just replace my cs757 CFG file with configuration given by Santos Dumont?

thanks alot

after that it could look like this...
















Included are the vc doom light, rotating beakon, xeon landing, and small taxi heading down.

To be independent of the gear (landing lights are switched on by default descending below FL100)
dont add the shockwave gear entry in the panel.cfg and delete the line regarding light.12, the taxi light
is linked to the taxi light switches and could be turned on after gear down, landing lights of course are
linked to the landing light switches.


Entrys:

[LIGHTS]        
light.0 = 1,   0.70,   0.00, -3.90, fx_shockwave_beacon_rotating_red.fx
light.1 = 1,  40.00,   0.30, 10.57, fx_shockwave_beacon_rotating_red.fx
light.2 = 4,  67.00,   2.00,  5.19, fx_shockwave_vclight_l.fx
light.3 = 4,  67.00,   -2.00, 5.19, fx_shockwave_vclight_l.fx
light.4 = 5,  15.35,   7.35,  0.10, Fx_shockwave_landing_light_small_xenon
light.5 = 5,  15.35,  -7.35,  0.10, Fx_shockwave_landing_light_small_xenon
light.6 = 7, -17.00, -47.00,  2.50, cs757_sf
light.7 = 7, -17.00,  47.00,  2.50, cs757_sf
light.8 = 8,  13.40, -17.47,  3.40, cs757_edge
light.9 = 8,  13.40,  17.47,  3.40, cs757_edge
light.10= 6,  57.80,    0.7, -4.34, fx_shockwave_landing_light_narrow_down.fx
light.11= 6,  57.80,   -0.7, -4.34, fx_shockwave_landing_light_narrow_down.fx
light.12= 5,  57.80,    0.0, -5.60, Fx_shockwave_landing_light_small_xenon          // to be independent of the gear-switch delete this entry !

Looks very great is this added on the tested on the FS9 version of the CS 757 or the FSX version.
I am verry curious to us this in FS9

Thanks much..!

Sebastian

eddie123 wrote on Apr 14^th, 2008 at 12:05pm:


To be independent of the gear (landing lights are switched on by default descending below FL100)  
dont add the shockwave gear entry in the panel.cfg and delete the line regarding light.12, the taxi light
is linked to the taxi light switches and could be turned on after gear down, landing lights of course are
linked to the landing light switches.