Hello,

I've got the 777-300ER working in game, but there is no sound. It is extremely minimal on the outside and nonexistent inside. Checked ACE and it's on latest version.

Any help would be appreciated!

Update: Sound on the outside is wind, not the engines, so no sound at all. On latest version.

Copy some MSFS2020 sound files to ...\Community\captainsim-aircraft-m773\SimObjects\Airplanes\CS_B777-300ER_GE115B\sound\

I did. I replaced the 747 sounds in it and it didn't change anything.

I've confirmed the problem isn't MSFS, as other planes are fine. It's just the 777 that doesnt have sound.

The only sound I files I have in the E:\Flight Sims\Microsoft Flight Simulator\Community\captainsim-aircraft-m773\SimObjects\Airplanes\CS_B777-300ER_GE115B\sound folder is:
Asobo_B747_8i.PC.PCK
sound.xml
I would think that if you have those in there, the sound should work.

Other than that. Where does the sound= point to in the aircraft.cfg:

[FLTSIM.0]
title=Boeing 777-300ER Captain Sim House 2021 ; Variation name
model= ; model folder
panel= ; panel folder
sound= ; sound folder
texture=CS.2021 ; texture folder
kb_checklists=checklist ; Procedures/Checklist sibling file name
kb_reference=Boeing747-400_ref ; Reference information sibling file name
description=TT:AIRCRAFT.DESCRIPTION ; Variation description.
wip_indicator=2 ; know if the variation is good to go or still WIP : -1=Disabled, 0=Rough, 1=1st Pass, 2=Finished
ui_manufacturer=Boeing
ui_type=777-300ER GE115B ; e.g. 747-400, 172
ui_variation=Captain Sim House 2021 ; e.g. World Air, IFR Panel
ui_typerole=Commercial Airliner ; e.g. Single Engine Prop, Twin Engine Prop, Rotorcraft, etc
ui_createdby=Captain Sim ; e.g. Asobo Studio, Microsoft, FSAddonCompany, etc
ui_thumbnailfile= ; app relative path to ThumbNail image file
ui_certified_ceiling=43100 ; service ceiling / max certified operating altitude (ft)
ui_max_range=7370 ; max distance the aircraft can fly between take-off and landing in (NM)
ui_autonomy=17 ; max duration the aircraft can fly between take-off and landing in (Hrs)
ui_fuel_burn_rate=21160 ; average fuel consumption per hour (lbs/hr) - reminder: fuel density is ~6.7lbs per US gallon
atc_id=CSM773 ; tail number
atc_id_enable=1 ; enable tail number
atc_airline=CAPTAINSIM ; airline name
atc_flight_number=CS777 ; flight number
atc_heavy=1 ; heavy?
atc_parking_types=GATE,RAMP,CARGO ; ANY / RAMP / CARGO / MIL_CARGO / MIL_COMBAT / GATE / DOCK
atc_parking_codes= ; Comma separated and may be as small as one character each
atc_id_color= ; color for the tail number : i.e. #ffff00ff
atc_id_font= ; font for the tail number
isAirTraffic=0 ; Is the plane usable for air traffic
isUserSelectable=1 ; Is the plane selectable by the user
ui_ants=2026

Note. In the above, everything that follows the semi-colon ( ; ) is ignored, and they are information comments on what the command line does.

In the sound folder, I also have
Asobo_B747_8i.PC.PCK and sound.xml

In soundAI I have
Asobo_B747_8i_AI.PC.PCK and soundai.xml

Here is the contents in aircraft.cfg:

[FLTSIM.0]
title=Boeing 777-300ER Captain Sim House 2021 ; Variation name
model= ; model folder
panel= ; panel folder
sound= ; sound folder
texture=CS.2021 ; texture folder
kb_checklists=checklist ; Procedures/Checklist sibling file name
kb_reference=Boeing747-400_ref ; Reference information sibling file name
description=TT:AIRCRAFT.DESCRIPTION ; Variation description.
wip_indicator=2 ; know if the variation is good to go or still WIP : -1=Disabled, 0=Rough, 1=1st Pass, 2=Finished
ui_manufacturer=Boeing
ui_type=777-300ER GE115B ; e.g. 747-400, 172
ui_variation=Captain Sim House 2021 ; e.g. World Air, IFR Panel
ui_typerole=Commercial Airliner ; e.g. Single Engine Prop, Twin Engine Prop, Rotorcraft, etc
ui_createdby=Captain Sim ; e.g. Asobo Studio, Microsoft, FSAddonCompany, etc
ui_thumbnailfile= ; app relative path to ThumbNail image file
ui_certified_ceiling=43100 ; service ceiling / max certified operating altitude (ft)
ui_max_range=7370 ; max distance the aircraft can fly between take-off and landing in (NM)
ui_autonomy=17 ; max duration the aircraft can fly between take-off and landing in (Hrs)
ui_fuel_burn_rate=21160 ; average fuel consumption per hour (lbs/hr) - reminder: fuel density is ~6.7lbs per US gallon
atc_id=CSM773 ; tail number
atc_id_enable=1 ; enable tail number
atc_airline=CAPTAINSIM ; airline name
atc_flight_number=CS777 ; flight number
atc_heavy=1 ; heavy?
atc_parking_types=GATE,RAMP,CARGO ; ANY / RAMP / CARGO / MIL_CARGO / MIL_COMBAT / GATE / DOCK
atc_parking_codes= ; Comma separated and may be as small as one character each
atc_id_color= ; color for the tail number : i.e. #ffff00ff
atc_id_font= ; font for the tail number
isAirTraffic=0 ; Is the plane usable for air traffic
isUserSelectable=1 ; Is the plane selectable by the user
ui_ants=2047

[FLTSIM.1]
title=Boeing 777-300ER British Airways G-STBN
model=
panel=
sound=
texture=1
kb_checklists=checklist
kb_reference=Boeing747-400_ref
description=TT:AIRCRAFT.DESCRIPTION
ui_manufacturer=Boeing
ui_type=777-300ER GE115B
ui_variation=British Airways G-STBN
ui_typerole=Commercial Airliner
ui_createdby=Captain Sim
ui_thumbnailfile=
ui_certified_ceiling=43100
ui_max_range=7370
ui_autonomy=17
ui_fuel_burn_rate=21160
isAirTraffic=0
isUserSelectable=1
wip_indicator=2
atc_id_enable=1
atc_parking_codes=
atc_id_color=
atc_id_font=
atc_id=G-STBN
atc_airline=British Airways
atc_flight_number=777
atc_heavy=1
atc_parking_types=GATE,RAMP,CARGO
ui_ants=2047

[FLTSIM.2]
title=Boeing 777-300ER United 2019 N2251U
model=
panel=
sound=
texture=2
kb_checklists=checklist
kb_reference=Boeing747-400_ref
description=TT:AIRCRAFT.DESCRIPTION
ui_manufacturer=Boeing
ui_type=777-300ER GE115B
ui_variation=United Airlines 2019 N2251U
ui_typerole=Commercial Airliner
ui_createdby=Captain Sim
ui_thumbnailfile=
ui_certified_ceiling=43100
ui_max_range=7370
ui_autonomy=17
ui_fuel_burn_rate=21160
isAirTraffic=0
isUserSelectable=1
wip_indicator=2
atc_id_enable=1
atc_parking_codes=
atc_id_color=
atc_id_font=
atc_id=N2251U
atc_airline=United Airlines
atc_flight_number=777
atc_heavy=1
atc_parking_types=GATE,RAMP,CARGO
ui_ants=2047

[FLTSIM.3]
title=Boeing 777-300ER Air New Zealand black ZK-OKQ
model=
panel=
sound=
texture=3
kb_checklists=checklist
kb_reference=Boeing747-400_ref
description=TT:AIRCRAFT.DESCRIPTION
ui_manufacturer=Boeing
ui_type=777-300ER GE115B
ui_variation=Air New Zealand black ZK-OKQ
ui_typerole=Commercial Airliner
ui_createdby=Captain Sim
ui_thumbnailfile=
ui_certified_ceiling=43100
ui_max_range=7370
ui_autonomy=17
ui_fuel_burn_rate=21160
isAirTraffic=0
isUserSelectable=1
wip_indicator=2
atc_id_enable=1
atc_parking_codes=
atc_id_color=
atc_id_font=
atc_id=ZK-OKQ
atc_airline=Air New Zealand
atc_flight_number=777
atc_heavy=1
atc_parking_types=GATE,RAMP,CARGO
ui_ants=2047

Jxck wrote on Jul 21^st, 2021 at 3:16am:

In the sound folder, I also have Asobo_B747_8i.PC.PCK and sound.xml

What's the size of these files?

Asobo_B747_8i.PC.PCK is 76,147KB and sound.xml is 28KB.

In soundAI, Asobo_B747_8i_AI.PC.PCK is 7,439KB and soundai.xml is 2KB.

For me:
sound folder: Asobo_B747_8i.PC.PCK is 75,759 KB  (size on disk 74.0 MB)
soundAI folder: Asobo_B747_8i_AI.PC.PCK is 7,439 KB (size on disk 7.26 MB)

Yeah it's pretty similar. I'm not sure what to do to fix the problem. Checked ACE and I am on latest version. Everything else works, just not sound.

Problem still persists and I don't know what to do about it at all

Alright the problem still persists, can someone please help me?

I would like to know why we have this problem of no sound, he's doing the flight when it arrives at the approach part on all flights both 772/773/77f and 767 of this problem before it didn't work normal, would you have any help to provide the Support

I also got this problem, but the problem is, I bought the B777 at MSFS marketplace so I can't see the aircraft file and there's no sound of the aircraft at all. Please help me, Im regretting buying this