Hi all,

Here's what's happening. I was following the flight plan and then ATC directed me to turn away from it for a bit... So I did. Eventually, it directed me to reconnect back to my old path. On newer Boeings there is a DIRECT TO, but this one doesn't seem to offer such an option, so my option was to just use HDG to return to the path and select LNAV so it would intercept it. HOWEVER...

If you do that, no matter which angle I intercept it on, the FMC tells me I am not on intercept heading and even if I cross the flight path (tried it at nearly 90 degrees, tried it at 10 degrees, tried at about 2 degrees and even in the same heading as the path), it doesn't seem to reactivate LNAV. Since I bypassed the next waypoint on the Legs page, I deleted that point and just had the next one coming up listed. But no such luck. Eventually, it seemed to resume LNAV somewhere close on approach but it it didn't really follow the path and just started heading in some what seems like random direction. So I had to fly the rest of approach using manual HDG.

Any ideas?

You can easily use the legs page to go to the current waypoint if you're off course.
On legs page press LSK1L to select the current waypoint then press it again and it will plot a direct course to that waypoint then hit execute.
Press LNAV and it'll proceed on course.

Ryz wrote on Apr 10^th, 2021 at 1:43am:

On legs page press LSK1L to select the current waypoint then press it again and it will plot a direct course to that waypoint then hit execute.

With the way this problem is happening to me, doing that would have me turning back (180^o) to get to it, so I find it better to press the LSK2L on the LEGS page, then select LSK1L to make it the next waypoint on the route, which is usually less than a 90^o heading.

Markoz wrote on Apr 11^th, 2021 at 3:33am:

Ryz wrote on Apr 10th, 2021 at 1:43am: On legs page press LSK1L to select the current waypoint then press it again and it will plot a direct course to that waypoint then hit execute. With the way this problem is happening to me, doing that would have me turning back (180o) to get to it, so I find it better to press the LSK2L on the LEGS page, then select LSK1L to make it the next waypoint on the route, which is usually less than a 90o heading.

You're right. I completely forgot about that. Is that correct? That seems like a bug. Other company 737 doesn't do that.

Its seems as if the FMC is deleting my flightplan. After departure it's gone. It's random however.

LNAV after HDG still not fixed with latest update.