CAPTAIN SIM FORUM
767 Captain II (P3D4) >> 767 Captain II - GeneralĀ  >> 767-300 Prepar3d V5
https://www.captainsim.org/forum/csf.pl?num=1589828091

Message started by gigabenga on May 18th, 2020 at 6:54pm

Title: 767-300 Prepar3d V5
Post by gigabenga on May 18th, 2020 at 6:54pm
Dear friends worked the 767-300 in V5? I will buy this Aircraft?

and second Questions is where found livieries?

Greetings

Title: Re: 767-300 Prepar3d V5
Post by Captain Sim on May 18th, 2020 at 8:08pm
We hope to get full P3D5 compatibility in the next update.

Most of the liveries are available via ACE. This is the list of what the 767 got for now.

Title: Re: 767-300 Prepar3d V5
Post by gigabenga on May 18th, 2020 at 8:16pm
Can i fly with this aircraft v5 now? I am aware that some bugs can occur. But can I fly with this now? and how about Navigraph support

Title: Re: 767-300 Prepar3d V5
Post by Captain Sim on May 19th, 2020 at 2:08pm

gigabenga wrote on May 18th, 2020 at 8:16pm:
Can i fly with this aircraft v5 now?

Yes.

2. Navigraph is supported in P3D4, not tested in 5.

Title: Re: 767-300 Prepar3d V5
Post by fly cln on May 22nd, 2020 at 1:23pm

Captain Sim wrote on May 18th, 2020 at 8:08pm:
We hope to get full P3D5 compatibility in the next update.


Way to get me excited. ;) Hope it's not too far off? :D

Title: Re: 767-300 Prepar3d V5
Post by NaMcO on May 22nd, 2020 at 2:27pm

Captain Sim wrote on May 19th, 2020 at 2:08pm:

gigabenga wrote on May 18th, 2020 at 8:16pm:
Can i fly with this aircraft v5 now?

Yes.

2. Navigraph is supported in P3D4, not tested in 5.


Everything works, i use it exclusively in v5.

The only issues i seem to have is the A/THR DISC message which appears when i turn on the battery and never ever goes away and the second FMC (first-officer side) when the right engine starts, blanks out the screen and i have to press any key on it to bring the image back.

Title: Re: 767-300 Prepar3d V5
Post by fly cln on May 22nd, 2020 at 3:37pm

NaMcO wrote on May 22nd, 2020 at 2:27pm:

Captain Sim wrote on May 19th, 2020 at 2:08pm:

gigabenga wrote on May 18th, 2020 at 8:16pm:
Can i fly with this aircraft v5 now?

Yes.

2. Navigraph is supported in P3D4, not tested in 5.


Everything works, i use it exclusively in v5.

The only issues i seem to have is the A/THR DISC message which appears when i turn on the battery and never ever goes away and the second FMC (first-officer side) when the right engine starts, blanks out the screen and i have to press any key on it to bring the image back.


So uh... was it a pain to install in v5?

I mean, I said I'd wait with my purchase until the v5 patch is out but...

Title: Re: 767-300 Prepar3d V5
Post by Alex T on May 22nd, 2020 at 4:08pm

fly cln wrote on May 22nd, 2020 at 3:37pm:

NaMcO wrote on May 22nd, 2020 at 2:27pm:

Captain Sim wrote on May 19th, 2020 at 2:08pm:

gigabenga wrote on May 18th, 2020 at 8:16pm:
Can i fly with this aircraft v5 now?

Yes.

2. Navigraph is supported in P3D4, not tested in 5.


Everything works, i use it exclusively in v5.

The only issues i seem to have is the A/THR DISC message which appears when i turn on the battery and never ever goes away and the second FMC (first-officer side) when the right engine starts, blanks out the screen and i have to press any key on it to bring the image back.


So uh... was it a pain to install in v5?

I mean, I said I'd wait with my purchase until the v5 patch is out but...


Not really, install into V4, then move everything (CaptainSim folder, Aircraft folder, and effects too) to the V5 folder. Then copy the lines from the V4 dll.xml (cs sound stuff) to the V5 dll.xml

Title: Re: 767-300 Prepar3d V5
Post by NaMcO on May 22nd, 2020 at 5:23pm

fly cln wrote on May 22nd, 2020 at 3:37pm:

NaMcO wrote on May 22nd, 2020 at 2:27pm:

Captain Sim wrote on May 19th, 2020 at 2:08pm:

gigabenga wrote on May 18th, 2020 at 8:16pm:
Can i fly with this aircraft v5 now?

Yes.

2. Navigraph is supported in P3D4, not tested in 5.


Everything works, i use it exclusively in v5.

The only issues i seem to have is the A/THR DISC message which appears when i turn on the battery and never ever goes away and the second FMC (first-officer side) when the right engine starts, blanks out the screen and i have to press any key on it to bring the image back.


So uh... was it a pain to install in v5?

I mean, I said I'd wait with my purchase until the v5 patch is out but...


No, dead easy. Just point the aircraft installer to the V5 folder and it's done. Remember to add the required DLLs in the dll.xml file also.

Title: Re: 767-300 Prepar3d V5
Post by Markoz on May 23rd, 2020 at 2:47am

NaMcO wrote on May 22nd, 2020 at 5:23pm:
No, dead easy. Just point the aircraft installer to the V5 folder and it's done. Remember to add the required DLLs in the dll.xml file also.

As of v0.96, you can choose either v4, or v5, on the installer, to install it. ;)

Note. v0.96 was released about 2 hours after NaMcO's reply. :D

CAPTAIN SIM FORUM » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2024. All Rights Reserved.