CAPTAIN SIM FORUM | |
1011 Captain II >> 1011 Captain II - GeneralĀ >> INS Problems
https://www.captainsim.org/forum/csf.pl?num=1586925096 Message started by SteamingSpoon on Apr 15th, 2020 at 4:31am |
Title: INS Problems Post by SteamingSpoon on Apr 15th, 2020 at 4:31am
Hi,
I'm pretty new to the L1011. I flew one flight succesfully but am now facing issues in my second try. I have made a flight plan from SimBrief and imported it to P3D using the integrated flight planner. I can successfully load the flightplan into the CIVA INS - all waypoints are appropriately loaded when I initialize the INS, but my present position is wrong (something I noticed with my latest flight). When I try to modify my present position, I can do so properly - but unfortunately it resets the Longitude of all my enroute waypoints to the exact longitude I entered for my position (from the POS page of the INS). To avoid this I left my present position as it was (slightly off from my actual present position during alignment) and the aircraft could not properly track the enroute waypoints - it erroneously commanded right turns when the subsequent waypoint was to the left. I can try loading in all waypoints individually but that defeats the purpose of the INS being able to take more than 9 waypoints and automatically reading from the P3D flightplan. Is the fact that all my enroute waypoints take the longitudinal position of my initial alignment position a bug? I did not face this issue on my previous flight. Is there a solution to this? Update: Loaded a new panel state and I could then successfully align to my present position without the enroute waypoints being affected. Might be something to do with a mismatched or corrupt panel state. |
CAPTAIN SIM FORUM » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |