CAPTAIN SIM FORUM | |
1011 Captain II >> 1011 Captain II - General >> Paul's gauge
https://www.captainsim.org/forum/csf.pl?num=1566419991 Message started by mark767 on Aug 21st, 2019 at 8:39pm |
Title: Paul's gauge Post by mark767 on Aug 21st, 2019 at 8:39pm Does Paul's gauge for takeoff and landing speeds work in P3D v4? |
Title: Re: Paul's gauge Post by mark767 on Aug 26th, 2019 at 5:50pm Paul's gauge is the V-One gauge that is available for L1011 32bit. Does it work on the 64 bit version? |
Title: Re: Paul's gauge Post by L-1011 on Aug 26th, 2019 at 6:34pm
I've try...seem not...hope that someone update also it
|
Title: Re: Paul's gauge Post by Markoz on Aug 27th, 2019 at 2:24am
I tried Paul's V-One gauge for the CS 737 for FSX, and it worked fine in for the CS 737 (64bit) for P3Dv4, so it's highly likely that the V-One gauge for the L-1011 will work fine (but that doesn't mean it will ;)).
|
Title: Re: Paul's gauge Post by L-1011 on Aug 27th, 2019 at 10:58am Markoz wrote on Aug 27th, 2019 at 2:24am:
how you install it on P3Dv4 for te 1011? |
Title: Re: Paul's gauge Post by mark767 on Aug 28th, 2019 at 5:52pm OK, I installed the gauge V1.3 from Avsim in the L1011 P3D v4.5. Basically I followed the instructions exactly...the only thing that is different is the size of the size_mm in [Window01]. I still changed the values to 72,128. It seems to work just fine although I have not actually started up the plane yet to get the V1, VR, V2 values. All else seems to work so I expect this will as well. |
Title: Re: Paul's gauge Post by L-1011 on Aug 28th, 2019 at 8:39pm
me too, installed 1.3 plus update and seem all work good
|
Title: Re: Paul's gauge Post by Tim Capps on Nov 18th, 2020 at 4:49pm
I ran into a gotcha someone with a better knowledge of computers would have noticed at once. Everywhere it says "L1011" I had to change it to "L1011-1." But yes, it works fine on the latest (as of this date) version of the L1011 and in P3Dv5.1 I get the callouts and and haven't crashed yet on account of bad numbers. (Not saying I haven't crashed due to old-fashioned pilot error during training flights.)
|
Title: Re: Paul's gauge Post by FelixTch on Dec 23rd, 2020 at 10:30am
I Installed the gauge and everything work fine with the V1 gauge but I got no callouts (even when the callouts are yellow) in P3DV4.5
I noticed that there is two folders in captain sim folder L1011-1 and L1011 I tried to move the 1011 to 1011-1 that removed all the sounds from the cockpit but I got some callouts so I reinstalled the aircraft and looking for a better solution, if someone had the same problem and mange to solve it? |
Title: Re: Paul's gauge Post by steveuk on Jan 11th, 2021 at 10:23am
Make sure the sound.ini file from v-one that goes into the captain-sim folder in for root prepar3d folder is edited as it points to a folder that no longer exists if you are using the 1011-ii.
Edit the line under [common] from Sound.Directory=Captain_Sim\1011\sound to Sound.Directory=Captain_Sim\1011-II\sound This maybe why you have no sounds install all of the sounds from the v-one package into this folder Captain_Sim\1011-II\sound not Sound.Directory=Captain_Sim\1011\sound Steve |
Title: Re: Paul's gauge Post by steveuk on Jan 11th, 2021 at 10:27am FelixTch wrote on Dec 23rd, 2020 at 10:30am:
Make sure the sound.ini file from the v-one package that goes into the captain-sim folder in your root prepar3d folder is edited as it points to a folder that no longer exists if you are using the latest version of the tristar for P3D4/5. (1011-ii) In the sound.ini file from V-one Edit the line under [common] from Sound.Directory=Captain_Sim\1011\sound to Sound.Directory=Captain_Sim\1011-II\sound This maybe why you have no sounds install all of the sounds from the v-one package into this folder Captain_Sim\1011-II\sound not Sound.Directory=Captain_Sim\1011\sound Steve |
Title: Re: Paul's gauge Post by linus on Apr 7th, 2021 at 3:55pm
Hey guys,I need some help here.I installed the gauge according
to all instructions,but it does not show.In the P3Dv4.5 sim,when I open the menu,I can see the V-one gauge is there.But I am not seeing it anywhere else.Clicking on the V-one gauge in the menu does not do anything.I think maybe I made a mistake somewhere.Could any of you give me any advice? |
Title: Re: Paul's gauge Post by Tim Capps on Jun 3rd, 2021 at 3:11am linus wrote on Apr 7th, 2021 at 3:55pm:
Hey, Linus, when you say “all instructions,” you mean the ones that came with the files or as modified per my post? It is a little tricky because of the name change to the “II” which does require some renaming for P3D. Drag and drop won’t work. |
Title: Re: Paul's gauge Post by Tim Capps on Jun 3rd, 2021 at 3:13am
P.S. (and other posts above, too).
|
Title: Re: Paul's gauge Post by Raul1011 on Jul 13th, 2021 at 12:19pm
yes!
I have installed it in P3dv4.5 and it works very well. I had to do was modify the path of the included sound file since it is ready for FSX, if you don't know how to do it, I can explain it to you. |
CAPTAIN SIM FORUM » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |