Hi, how can i get rid of an image on my PFD display has has an embedded colour image of CSB408 with in? The only way to get rid of it is to turn the brigtness down of EFIS.

Also, even with engine bleed valves, trim air, and packs the cabin altitude alert will not go off. I'm wobdering if a recent WEIN10 upgrade has damaged the 757. as it won't start properly either. I also notice taxiing is alot harder now too.

here's an image

---

speedbird001 wrote on Jun 16^th, 2019 at 1:25pm:

how can i get rid of an image on my PFD display has has an embedded colour image of CSB408 with in?

Try to turn off the radar TEST mode.

Thanks will give it a try and report back. Are you familiar with that CS408 message?

Captain Sim wrote on Jun 17^th, 2019 at 2:08pm:

speedbird001 wrote on Jun 16th, 2019 at 1:25pm: how can i get rid of an image on my PFD display has has an embedded colour image of CSB408 with in? Try to turn off the radar TEST mode.

When I saw the original post yesterday, I thought it was because the WXR was in TEST mode, but when I put it in TEST mode, I get the test patern, but not the CSB408 writing displayed on it.
I know I have seen the writing on the WXR before, but I can't remember when/how that happened (nor in which flight sim I saw it). :(