CAPTAIN SIM FORUM | |
757 Captain III >> 757 Captain III - General >> Pedestal radios and avionics not working
https://www.captainsim.org/forum/csf.pl?num=1548183417 Message started by jalbino59 on Jan 22nd, 2019 at 6:56pm |
Title: Pedestal radios and avionics not working Post by jalbino59 on Jan 22nd, 2019 at 6:56pm
I searched this forum for information and I was unable to find anyone having this issue, so I have to assume I'm doing something wrong.
My problem, after starting, the comm radios are on, but the frequency windows in all of the pedestal avionics are dark. No frequencies, transponder code, ILS frequency and so-on. Can you help me correct this. Thanks. |
Title: Re: Pedestal radios and avionics not working Post by Colvale on Jan 22nd, 2019 at 7:03pm
All working fine as I fly this aircraft right now.
|
Title: Re: Pedestal radios and avionics not working Post by jalbino59 on Jan 22nd, 2019 at 7:10pm Colvale wrote on Jan 22nd, 2019 at 7:03pm:
That's great, can you help me get to where you are? |
Title: Re: Pedestal radios and avionics not working Post by Colvale on Jan 22nd, 2019 at 7:16pm
Have you tried using Shift+2 to bring up the corner panel that lets you interface with everything. There is Radio Button on it. Try switching it on and see what displays.
|
Title: Re: Pedestal radios and avionics not working Post by jalbino59 on Jan 22nd, 2019 at 7:22pm
Yes I did, that just brings up the 2d panel. There are no frequencies visible in that either.
|
Title: Re: Pedestal radios and avionics not working Post by Colvale on Jan 22nd, 2019 at 7:29pm
No radio panel being displayed in 2D, or it is being displayed but blank displays for the frequencies as per my image? If so, them CS will have to help you on this.
|
Title: Re: Pedestal radios and avionics not working Post by jalbino59 on Jan 22nd, 2019 at 8:01pm Colvale wrote on Jan 22nd, 2019 at 7:29pm:
My 2D panel looked just like your except it had no frequencies or code visible. But I just found what caused the issue and it's all good now. |
Title: Re: Pedestal radios and avionics not working Post by Colvale on Jan 22nd, 2019 at 8:17pm
Great to know. Result.
|
Title: Re: Pedestal radios and avionics not working Post by jalbino59 on Jan 22nd, 2019 at 8:48pm
@Captain Sim
FYI Apparently, the the latest MSVB C++ runtimes (2017) will remove the required 2015 runtimes causing issues such as the one I experienced. This is at least the case for the english version WIN10. Just wanted to point this out you as it may effect other users as well. I don't recall manually installing that update but it could have been pushed by MS. |
Title: Re: Pedestal radios and avionics not working Post by Colvale on Jan 22nd, 2019 at 9:08pm
Thanks for that heads-up as I do run a Win10 1809 set-up. Touch wood, so far no issues.
|
Title: Re: Pedestal radios and avionics not working Post by Alex Mollen on Dec 29th, 2020 at 2:34am
If anybody else gets this, try toggling the Master Avionics button.
|
CAPTAIN SIM FORUM » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |