CAPTAIN SIM FORUM | |
757 Captain III >> 757 Captain III - General >> Starting engines 2
https://www.captainsim.org/forum/csf.pl?num=1516288852 Message started by Thantheleon on Jan 18th, 2018 at 3:20pm |
Title: Starting engines 2 Post by Thantheleon on Jan 18th, 2018 at 3:20pm
Just to confirm there's no bug in the engine startup procedure at CS end:
Right engine startup video Every action matters. Double-check PACKs. If you still experience some issues with the engines startup this is the place to share. |
Title: Re: Starting engines 2 Post by Adrian Quero on Jan 18th, 2018 at 4:32pm
I have problems with the second engine
|
Title: Re: Starting engines 2 Post by Markoz on Jan 19th, 2018 at 2:18am
I had that problem too, but I pressed the shortcut keys I created for Avionics master (on/off), and the second engine started fine.
Note. I did notice that the STBY POWER knob went from OFF to AUTO when I did it, so it's possible that all that was needed to be done, was to switch that to AUTO in the first place. :-/ |
Title: Re: Starting engines 2 Post by WF442 on Mar 9th, 2018 at 3:34pm
Hello.
I am also having problems starting engine 2. I can confirm that the avionics switch is connected to the standby power switch, but in my case that didn`t help. regards Bjørn E. Henriksen. |
Title: Re: Starting engines 2 Post by WF442 on Mar 10th, 2018 at 9:54am
Hi again.
Just wanted to say sorry to the team. I was at fault. Forgot the Isolation valve. Oops! ;D regards Bjørn E. Henriksen |
CAPTAIN SIM FORUM » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |