CAPTAIN SIM FORUM | |
727 Captain >> 727 Captain >> Missing CABs in 2.6?
https://www.captainsim.org/forum/csf.pl?num=1447074096 Message started by Mustang1977 on Nov 9th, 2015 at 1:01pm |
Title: Missing CABs in 2.6? Post by Mustang1977 on Nov 9th, 2015 at 1:01pm
Hello people,
I've discovered that possibly a few CABs are missing. 3 CoPilot Gauges are not present which require these. The affected (missing) CABs are: - Captain_Sim.p721.R04.cab - Captain_Sim.p721.R10.cab - Captain_Sim.p721.R13.cab So there I can't see no airspeed, altitude and radaralt Gauge on the CoPilots side. Could anyone please look if this problem is not only on my side? It's easy to fix this, only replaced the "R" with an "L" in the panel.cfg in section [VCockpit07]: gauge00=Captain_Sim.p721.R01!R01_machmeter, 24,26, 200,200 gauge01=Captain_Sim.p721.R03!R03_aplight, 625,749, 55,55 gauge02=Captain_Sim.p721.L04!L04_airspeed, 275, 30, 177, 169 gauge03=Captain_Sim.p721.R05!R05_rmi, 275, 775, 200,200 gauge04=Captain_Sim.p721.L10!L10_altimeter, 275,270, 210,240 gauge05=Captain_Sim.p721.R11!R11_vsi, 20,524, 217,220 gauge06=Captain_Sim.p721.L13!L13_ra, 260,505, 240,240 |
Title: Re: Missing CABs in 2.6? Post by fsxpaul on Nov 9th, 2015 at 2:00pm Mustang1977 wrote on Nov 9th, 2015 at 1:01pm:
All required files are accounted for. There are no missing files. The following CAB files are all that's needed for the gauges you've mentioned: Captain_Sim.p721.L04.cab has L04_airspeed.spb and R04_airspeed.spb included. Captain_Sim.p721.L10.cab has L10_altimeter.spb and R10_altimeter.spb included. Captain_Sim.p721.L13.cab has L13_ra.spb and R13_ra.spb included. Note: The SPB extension is a compiled XML file that loads and runs faster in FSX. |
Title: Re: Missing CABs in 2.6? Post by Mustang1977 on Nov 9th, 2015 at 2:51pm
I see, but the gauges are not present in the VC because the 3 entries in the panel.cfg are wrong.
Do you have the airspeed, altimeter and radaralt on the CoPilots side from the beginning? The correct fix should look like this, but it doesn't matter, it's all the same ;) gauge02=Captain_Sim.p721.L04!R04_airspeed, 275, 30, 177, 169 gauge04=Captain_Sim.p721.L10!R10_altimeter, 275,270, 210,240 gauge06=Captain_Sim.p721.L13!R13_ra, 260,505, 240,240 Simply replace the "R" with an "L". |
Title: Re: Missing CABs in 2.6? Post by fsxpaul on Nov 9th, 2015 at 3:16pm Mustang1977 wrote on Nov 9th, 2015 at 2:51pm:
Mine works perfectly as is. No need for modification to the panel.cfg file. You must have been using an older panel.cfg file which was correct for a previous version. More than likely v2.4 |
Title: Re: Missing CABs in 2.6? Post by Mustang1977 on Nov 9th, 2015 at 3:49pm fsxpaul wrote on Nov 9th, 2015 at 3:16pm:
Yes indeed, because I've not deleted my previous panel.cfg (it was modded). As I've compared with the new one this change I have overseen :) |
Title: Re: Missing CABs in 2.6? Post by fsxpaul on Nov 9th, 2015 at 4:07pm Mustang1977 wrote on Nov 9th, 2015 at 3:49pm:
I highly recommend using the correct panel.cfg and applying any mods to that. CS made many changes to the code and it's possible that you'll experience more issues by not using the proper panel.cfg file. Just my opinion ;) |
Title: Re: Missing CABs in 2.6? Post by Mustang1977 on Nov 10th, 2015 at 12:17pm
Yes, thanks for the advise. But I don't think that I've overseen something further - all systems work as they should. The pressuration for example is now working correctly without a MOD like in 2.4 and earlier.
I think the 727 is one of the most finished airplanes form CS :) |
CAPTAIN SIM FORUM » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |