CAPTAIN SIM FORUM
777 Captain (32-bit) >> 777 Captain (32bit) - General >> P3D and 777-200
https://www.captainsim.org/forum/csf.pl?num=1373640775

Message started by asanal on Jul 12th, 2013 at 2:52pm

Title: Re: P3D and 777-200
Post by Markoz on Feb 12th, 2017 at 1:47am

Shaktman wrote on Feb 5th, 2017 at 6:49pm:
After 6 consecutive stall and crash on takeoff I tried this last night and it worked! DO NOT USE TO/GA SWITCH flaps 5 throttle advance manually rotate GENTLY and monitor airspeed keep wings level. When airspeed increases to more than 200 kts by adjusting pitch (forget about flight director) then engage autopilot lnav vnav and autothrottle

If you set the trim correctly, it shouldn't stall! But if you are using derated thrust, you need to be very careful not to stall it. To avoid that, it might be worth setting the A/T to a higher speed (I set it to about 200/205 knots). I always use the TOGA switch to take off, and I can't remember the last time the 777 stalled just after takeoff.

CAPTAIN SIM FORUM » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2024. All Rights Reserved.