CAPTAIN SIM FORUM - Print Page

CAPTAIN SIM FORUM
757 Captain >> 757 version 4.x (FSX ONLY) >> V-One Callout - no sound https://www.captainsim.org/forum/csf.pl?num=1361666760 Message started by park86 on Feb 24^th, 2013 at 12:45am

Title: V-One Callout - no sound
Post by park86 on Feb 24^th, 2013 at 12:45am

I followed the install to a "T" I believe. I will post my entries if necessary. �The guage appears but no sound. �What am I missing. �
Update: I have tripple checked my installation and all ok. I am using the Delta livery but it is the 757-200 and the vspeed guage is there but the cg is missing on the cdu (it is properly installed in Window 06) and no call outs. If anyone can shed light or direct me to a different thread I would appreciate it. This is frustrating.

Title: Re: V-One Callout - no sound
Post by CoolP on Feb 26^th, 2013 at 4:17am

When it is properly installed, I can only think of this paragraph being relevant.

Quote:

V-One Gauge Initialization:
When starting in the 3D cockpit, the gauge will not be initialized. Use one of the
following methods to activate gauge:

1. Click on the 'VSpeed Input' icon within the 'Simicons' group (Shift+2).
2. If icon is not installed, toggle to the 2D window view (A or Shift+A).
3. Use FSX menu; 'View', 'Instrument Panel', 'VSpeed Input'.
After the gauge appears, mouse-click anywhere on the black screen area to initialize
gauge.

Did you already check those steps?

Title: Re: V-One Callout - no sound
Post by park86 on Feb 26^th, 2013 at 3:16pm

Maybe not. My problem may be with the initialization. I will try it today. Thanks.

Title: Re: V-One Callout - no sound
Post by park86 on Feb 26^th, 2013 at 10:33pm

Ashamed but maybe it will help someone else but after a 4th review I found it works better when "gauge" is spelled correctly in VCockpit01.

Title: Re: V-One Callout - no sound
Post by CoolP on Mar 2^nd, 2013 at 11:48am

;D Sounds good, Park. Glad you've got it working.

Title: Re: V-One Callout - no sound
Post by Michaelsd44 on Apr 4^th, 2013 at 4:36pm

I am having the issue of no sound using the V-One gauge. I have triple checked my settings, looking at the panel notepad, but no sounds. I have tried to initialize the gauge with no effect. The gauge shows up, the icon shows up, all the files are in place except for one the instructions show which is snd.txt. I have looked in the downloaded files and do not see that file. I downloaded the gauge again and did not locate a snd.txt file. I can't figure this one out. I appreciate the help in advance. :D

Title: Re: V-One Callout - no sound
Post by fsxpaul on Apr 5^th, 2013 at 12:34am

Michaelsd44 wrote on Apr 4^th, 2013 at 4:36pm:

I am having the issue of no sound using the V-One gauge. � I have triple checked my settings, looking at the panel notepad, but no sounds. �I have tried to initialize the gauge with no effect. �The gauge shows up, the icon shows up, all the files are in place except for one the instructions show which is snd.txt. �I have looked in the downloaded files and do not see that file. �I downloaded the gauge again and did not locate a snd.txt file. �I can't figure this one out. �I appreciate the help in advance. � :D

The snd.txt file was only a list of the included sound files. It has no other purpose.

1. Are you trying to install to Prepar3D?
2. Does the VSpeed Input gauge open?
3. Does the sound check work when you click on the top of the VSpeed Input gauge?

Please check that you panel.cfg has the following in it:
(Note: Your gaugeXX values may be different!)

Code (]
[Window Titles):

..
Window44=VSpeed Input

[Window01]
size_mm=48, 288
background_color=1,1,1
window_pos=0.0,0.75
visible=1
zorder=99
ident=12101
gauge00=Captain_Sim.200!iAnim, � � 0, � 0, 24, 32
gauge01=Captain_Sim.200!iCDU, � � �0, �32, 24, 32
gauge02=Captain_Sim.200!iEfis, � � 0, �64, 24, 32
gauge03=Captain_Sim.200!iRadio, � �0, �96, 24, 32
gauge04=Captain_Sim.200!iYoke, � � 0, 128, 24, 32
gauge05=Captain_Sim.200!iNote, � � 0, 160, 24, 32
gauge06=Captain_Sim.200!iExtPw, � �0, 192, 24, 32
gauge07=Captain_Sim.200!iExit, � � 0, 256, 24, 32
gauge08=Captain_Sim.200!iOH, � � � 24, � 0, 24, 32
gauge09=Captain_Sim.200!iLight, � �24, �32, 24, 32
gauge10=Captain_Sim.200!iAP, � � � 24, �64, 24, 32
gauge11=Captain_Sim.200!iIRS, � � �24, �96, 24, 32
gauge12=Captain_Sim.200!iP, � � � �24, 128, 24, 32
gauge13=Captain_Sim.200!iATC, � � �24, 160, 24, 32
gauge14=Captain_Sim.200!iExtBAir, �24, 192, 24, 32
gauge15=Captain_Sim.200!iRDR, � � �24, 224, 24, 32
gauge16=/V-One!v1_Icon, � � � � � �0, �224, 24, 32

[Window06]
Background_color=16,16,16
size_mm=360, 776
position=2
visible=0
zorder=85
ident=12105
gauge00=Captain_Sim.b757.fms!cdu, 0, �0, 360, 750
gauge01=/V-One!CG_Trim,0,750

[Window44]
size_mm= 256, 275
window_pos= 0.0, 0.1
position=
visible=1
ident=130
gauge00=/V-One!VSpeedInput, 0, 0, 256, 275

[VCockpit01]
..
gauge29=dsd_fsx_xml_sound!Sound,2,2,2,2,\panel\V-one\V-One_Sound.ini
gauge30=dsd_fsx_xml_sound!Debugger, 420,550,600,80
gauge31=/V-One!V-One, 0, 0, 0, 0

Title: Re: V-One Callout - no sound
Post by Markoz on Apr 5^th, 2013 at 1:06am

fsxpaul wrote on Apr 5^th, 2013 at 12:34am:

Michaelsd44 wrote on Apr 4^th, 2013 at 4:36pm:

Welcome back Paul! It's great to have you back. [smiley=thumbsup.gif]

Title: Re: V-One Callout - no sound
Post by Michaelsd44 on Apr 5^th, 2013 at 2:27am

Paul I am using this in FSX on a Dell Pentium i7 3.4ghz 8 gigs ram, 1024 mb video card with plenty of HD space. The gauge opens I can change the v speeds, reset the fuel burned, but the sound check does not work. I checked all my setting with what you have and what the read me file had and all is there in the same order checked and double checked. I'm stumped.

Title: Re: V-One Callout - no sound
Post by fsxpaul on Apr 5^th, 2013 at 3:13am

Michaelsd44 wrote on Apr 5^th, 2013 at 2:27am:

Paul I am using this in FSX on a Dell Pentium i7 3.4ghz 8 gigs ram, 1024 mb video card with plenty of HD space. �The gauge opens I can change the v speeds, reset the fuel burned, but the sound check does not work. �I checked all my setting with what you have and what the read me file had and all is there in the same order checked and double checked. �I'm stumped.

Please check for the dsd_fsx_xml_sound.gau in your C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\Gauges folder.

If it is there, search for dsd_fsx_xml_sound.gau in you FSX.cfg file under the [Trusted] section. If you're using Notepad, press F3 to search for any duplicate entries. Delete all entries.

Save the file, and run FSX again. If dsd_fsx_xml_sound.gau is loaded into FSX, you should be prompted to accept the gauge.

Title: Re: V-One Callout - no sound
Post by fsxpaul on Apr 5^th, 2013 at 8:48am

Markoz wrote on Apr 5^th, 2013 at 1:06am:

Welcome back Paul! It's great to have you back. �[smiley=thumbsup.gif]

Thanks Mark!

Title: Re: V-One Callout - no sound
Post by Michaelsd44 on Apr 5^th, 2013 at 7:53pm

The importance of spelling can not be over emphasized in this situation. As with another post in this thread, I too fell victim to the inability to spell. My word...xml. Not xlm but xml. Thank you for your patience in helping a poor humble unable to spell xml person. I am grateful for your assistance. On to my next issue!!! ;D

Title: Re: V-One Callout - no sound
Post by fsxpaul on Apr 5^th, 2013 at 10:16pm

Michaelsd44 wrote on Apr 5^th, 2013 at 7:53pm:

The importance of spelling can not be over emphasized in this situation. �As with another post in this thread, I too fell victim to the inability to spell. �My word...xml. �Not xlm but xml. �Thank you for your patience in helping a poor humble unable to spell xml person. �I am grateful for your assistance. �On to my next issue!!! ;D

No problem at all.

Glad you have it working now.

Title: Re: V-One Callout - no sound
Post by hdpatino on Feb 18^th, 2015 at 1:49am

Hello everyone. Please, if someone read this, I'm tired of looking for a solution for this problem. There are not V1, R and V2 calls and the 2000ft 1000ft, minumum and all the callouts.

PLEASE if some one read this, tell me how to solve this ASAP. I've been using this 757 for months and I really want to solve this.

Thank you!

Title: Re: V-One Callout - no sound
Post by Markoz on Feb 18^th, 2015 at 1:57am

hdpatino wrote on Feb 18^th, 2015 at 1:49am:

This might work. Try changing this:

[Common]
Refresh.Time=10
Sound.Directory=Captain_Sim\757\sound
SoundOffWhenSimIsSlew=1
SoundOffWhenSimIsPaused=1
SoundOffWhenSimDialogIsOpen=1
SoundOffWhenSimSoundIsOff=1

to this:

[Common]
Refresh.Time=10
Sound.Directory=Captain_Sim\757\sound
SoundOffWhenSimIsSlew=0
SoundOffWhenSimIsPaused=0
SoundOffWhenSimDialogIsOpen=0
SoundOffWhenSimSoundIsOff=0

in the sound.ini file FSX\Captain_Sim\757 folder.

Those are the first 7 entries in the file (right at the top) so they are easy to find.

Title: Re: V-One Callout - no sound
Post by hdpatino on Feb 18^th, 2015 at 2:12am

Markoz wrote on Feb 18^th, 2015 at 1:57am:

hdpatino wrote on Feb 18^th, 2015 at 1:49am:

Done.

I'm flying right now. Should it works instantly? Or do I have to restart the simulator?

Is this going to fix the sound of both smoking and seat belts switches? They didn't work too.

Title: Re: V-One Callout - no sound
Post by Markoz on Feb 18^th, 2015 at 2:23am

It should work straight away as long as you loaded/reloaded the 757 after making the changes. :)

Title: Re: V-One Callout - no sound
Post by hdpatino on Feb 18^th, 2015 at 3:51am

Markoz wrote on Feb 18^th, 2015 at 2:23am:

It should work straight away as long as you loaded/reloaded the 757 after making the changes. :)

Well, it didn't work.

So, now? What else do I have to do?

I do not know why, but I had to install the 4.5 version. In the website say that "Only if you have purchased the 757 Captain (Base pack, 757 Freighter or 757-300) before 15:00 UTC, 11 Oct 2011."

I purchase it last year.. This version fixed ALL the sounds, seat belts, smoking, APU, 1000ft, 500ft, 50 40 30.. all of those, however I cannot listen to the V1, R and V2. I change the numbers you said but nothing happened.

Title: Re: V-One Callout - no sound
Post by Markoz on Feb 18^th, 2015 at 4:18am

In my original response to your problem, I thought I was dealing with the default GPWS sounds for the Captain Sim 757, not with the V-One Callout gauge, so those fixes I gave, won't help.

With the V-One Callout, I can only suggest that you made a mistake with an entry in the panel.cfg, or you did not put all the files in the correct folder so that they work correctly. I do not have the V-One Callout gauge installed in my 757, so I can't help you any further. Sorry.

:(

Title: Re: V-One Callout - no sound
Post by hdpatino on Feb 18^th, 2015 at 4:28am

Markoz wrote on Feb 18^th, 2015 at 4:18am:

I see. It's fine, I can handle with that, it just to make it more "realistic."

Anyway, thank you Markoz.

Title: Re: V-One Callout - no sound
Post by fsxpaul on Feb 19^th, 2015 at 12:16pm

hdpatino wrote on Feb 18^th, 2015 at 4:28am:

Markoz wrote on Feb 18^th, 2015 at 4:18am:

I see. It's fine, I can handle with that, it just to make it more "realistic."

Anyway, thank you Markoz.

If you perform any update or repair to your 757, your V-One gauge will be removed.
You will need to re-install the V-One gauge again.

Title: Re: V-One Callout - no sound
Post by Jim Kaye on Feb 21^st, 2015 at 12:39am

I have installed the V-One Callouts for both the B757 and B767 Captain Sim aircraft. The installations worked perfectly, with no problems encountered with sound. Thanks for providing this extra realism! :)

Jim Kaye

Title: Re: V-One Callout - no sound
Post by fsxpaul on Feb 22^nd, 2015 at 2:13am

Glad you like it! It was something I enjoyed putting together too :)