CAPTAIN SIM FORUM - Print Page

CAPTAIN SIM FORUM
777 Captain (32-bit) >> 777 Captain (32bit) - General >> 777 graphic problem https://www.captainsim.org/forum/csf.pl?num=1359303609 Message started by ChthoniC Chao on Jan 27^th, 2013 at 4:20pm

Title: 777 graphic problem
Post by ChthoniC Chao on Jan 27^th, 2013 at 4:20pm

When I flying the 777 and click esc bottom. And then I click continue flying, the scenery and graphic are crash. Sometimes, I can't see the 777 and just saw the gear and engine. I click esc bottom again and again, but just can't fix. �:'(

sorry for my bad English �:-[ �

Can enyone tell me how to do?? �:-/

Title: Re: 777 graphic problem
Post by Markoz on Jan 27^th, 2013 at 4:46pm

I'm not sure why it's happening, but could it be that the settings are too high for FSX and the 777 on your computer?

Out of curiosity, why do you keep pressing the escape button if you don't want to end the flight? Or are you pressing the ESC key by accident?

Title: Re: 777 graphic problem
Post by Mcleod97 on Jan 27^th, 2013 at 7:10pm

If it happens again, try pressing ctrl+alt+delete and the press esc.

Title: Re: 777 graphic problem
Post by ChthoniC Chao on Jan 28^th, 2013 at 3:06am

Thanks for the suggestions :)
But when I Fly 777 more than 5 minutes or longer.
The graphic will crash, too.
I try to turn the settings down, but it still happen :-/

Title: Re: 777 graphic problem
Post by Markoz on Jan 28^th, 2013 at 3:15am

Reinstall the 777 and select Repair (do not uninstall the 777, just repair it), when given the option to Repair or Remove. Se if that fixes the graphics and crashing issue.

Title: Re: 777 graphic problem
Post by ChthoniC Chao on Jan 28^th, 2013 at 3:18am

I have my REX 2.0 installed.
Is that cause the problem??

Title: Re: 777 graphic problem
Post by Markoz on Jan 28^th, 2013 at 3:38am

I don't honestly know. The 777 would have to be very hard on lower ended computers, so adding REX 2 textures might make it worse. Especially if you are using the OverDrive HD textures in FSX.

Title: Re: 777 graphic problem
Post by ChthoniC Chao on Jan 28^th, 2013 at 3:47am

I got it
Thanks :)

Another questions: I saw the speed in MFD is not the
true speed ?? :-?

Title: Re: 777 graphic problem
Post by Saratoga on Jan 29^th, 2013 at 3:47am

ChthoniC Chao wrote on Jan 28^th, 2013 at 3:47am:

I got it
Thanks :)

Another questions: I saw the speed in MFD is not the
true speed ?? :-?

Do you mean the ND (nav display) on the MFD?
TAS = true airspeed
GS = ground speed
The PFD shows IAS (indicated airspeed) on the speed tape. IAS is an accurate measurement of the dynamic pressure on the aircraft and so is useful for any speeds that involve aerodynamics such as stall speed or Vne (never exceed speed). However, IAS does not accurately measure the true speed of the aircraft through the air. This is due primarily to altitude and temperature.