CAPTAIN SIM FORUM - Print Page

CAPTAIN SIM FORUM
General >> Hangar talks >> For captain who have problems with 707 or 737radio https://www.captainsim.org/forum/csf.pl?num=1358508083 Message started by ddanield on Jan 18^th, 2013 at 11:21am

Title: For captain who have problems with 707 or 737radio
Post by ddanield on Jan 18^th, 2013 at 11:21am

Hello

In the aircraft.cfg of Cs 707 and Cs737 you have a part [radios) and the numeric code of the lines are
for the first number : 1 = available
for the second : 1= standby usable
for the 3th : 1 = usable for ILS
The original version of this two files are incorrect.
You can corrige this lines so :
nav.1 = 1, 0, 1
nav.2 = 1, 0, 0

Bye

Title: Re: For captain who have problems with 707 or 737radio
Post by Markoz on Jan 18^th, 2013 at 12:11pm

As you can see from the entry in the aircraft.cfg for my 707-300:

[Radios]
Audio.1=1
Com.1=1, 0
Com.2=1, 0
Nav.1=1, 0, 1
Nav.2=1, 0, 0
Adf.1=1, 0
Adf.2=1, 0
Transponder.1=1
Marker.1=1

and the entry in the aircraft.cfg for my 737-200:

[Radios]
// Radio Type = availiable, standby frequency, has glide slope
Audio.1= 1
Com.1 � = 1, 0
Com.2 � = 1, 0
Nav.1 � = 1, 0, 1
Nav.2 � = 1, 0, 0
Adf.1= 1
Adf.2= 1
Transponder.1 = 1
Marker.1= 1

that that is the way they are set by default. So mine have always been like that. Yours should have been the same. :-/

Title: Re: For captain who have problems with 707 or 737radio
Post by ddanield on Jan 18^th, 2013 at 8:55pm

Hello Mark

Sorry ! For me it was :
nav.1= 0, 1, 1
nav.2 = 0, 1, 0

and after installations of Civa and other �(???) I found the radios impossible to use. Perhaps I was not alone . Yes Mark it's exact the original aircraft was correct.
Bye