Hi all,

I have had the same problems and managed to get it fixed to an acceptable level for the main exit (default FSX jetway)
Regarding the Cargo doors, I have not yet been able to fix the cargo contact points properly yet, everytime I change it in a logical way, unlogical things seem to happen. I haven't been able to figure it out yet.

For the 737-100 I am using
[exits]
number_of_exits = 4
exit.0 = 0.4, 23.3, -5.6, 1.0, 0
exit.1 = 10.0, 17.3, 5.5, 4.0, 2
exit.2 = 0.4, 0.0, 5.0, -3.0, 1
exit.3 = 0.4, 0.0, 5.0, -3.7, 1

For the 737-200 I am using:
[exits]
number_of_exits = 4
exit.0 = 0.4, 26.3, -5.6, 1.0, 0
exit.1 = 10.0,  20.3,  5.6,  4.0, 2
exit.2 =  0.4,  13.0,  5.0, -3.0, 1
exit.3 =  0.4, -22.0,  3.8, -3.7, 1

For the 737-200ADV I am using:
[exits]
number_of_exits = 4
exit.0 = 0.4, 26.3, -5.6, 1.0, 0
exit.1 = 10.0,  38.0,  0.0,  4.0, 2
exit.2 =  0.4,  13.0,  5.0, -3.0, 1
exit.3 =  0.4, -22.0,  3.8, -3.7, 1

For the 737-200C I am using:
[exits]
number_of_exits = 4
exit.0 = 0.4, 26.3, -5.6, 1.0, 0
exit.1 = 10.0,  38.0,  0.0,  4.0, 2
exit.2 =  0.4,  13.0,  5.0, -3.0, 1
exit.3 =  0.4, -22.0,  3.8, -3.7, 1

For the 737-200F I am using:
[exits]
number_of_exits = 4
exit.0 = 0.4, 26.3, -5.6, 1.0, 0
exit.1 = 10.0,  38.0,  0.0,  4.0, 2
exit.2 =  0.4,  13.0,  5.0, -3.0, 1
exit.3 =  0.4, -22.0,  3.8, -3.7, 1

You will actually only have to change the first line for the Exits section i.e. 'exit.0' in the aircraft.cfg file for each model

Hope this helps.

Best Regards,
Marc