It sure would make it nice  to Fly  :D

Not as far as I'm aware though I use Project Magenta's Boeing Suite of software in the C-130, cool.

Thanks i will have to look into that  its the only thing i don't  like about the  C 130

I've  installed  the ISG panels with my CS-C-130X.  Replaced the TCAS with an EHSI, added the CMU, FMS, GNSXLS.  I have the saitek mulitpanel, comm panel and switch panels so I changed the autothrottle-1 for autothrottle control.    One of the things i found helpful was to put the vnav switch and mount it directly on the ISG-CMU in an open spot for vnav/lnav function.   As close to the J model as we can get at the moment with this older style instrument panel.

Hi Don  any chance  you could help me to set one up ??? i just have Yoke /Throttle but i sure would like to figure out how to install a Fmc .

ISG FSX this is what i have........

On panel.cfg.....add
Window21=HW_B737_ND
Window22=SMITHS_FMS
Window23=HW_B737_EFIS_CNTR
Window24=MCU

*****************
[Window21]
Background_color=0,0,0
size_mm=312,240
window_size_ratio=1.000
position=0
visible=0
ident=4001
window_pos=0.0571, 0.3798
window_size=0.2779, 0.2283

gauge00=isg1!HW_B737_ND, -2,0,312,240,WN

[Window22]
Background_color=0,0,0
size_mm=312,240
window_size_ratio=1.000
position=0
visible=0
ident=4002
window_pos=0.0571, 0.3798
window_size=0.2779, 0.2283

gauge00=isg1!SMITHS_FMS, -2,0,312,240,WN

[Window23]
Background_color=0,0,0
size_mm=312,240
window_size_ratio=1.000
position=0
visible=0
ident=4003
window_pos=0.0571, 0.3798
window_size=0.2779, 0.2283

gauge00=isg1!HW_B737_EFIS_CNTR, -2,0,312,240,WN

[Window24]
Background_color=0,0,0
size_mm=312,240
window_size_ratio=1.000
position=0
visible=0
ident=4001
window_pos=0.0571, 0.3798
window_size=0.2779, 0.2283

gauge00=isg1!MCU, -2,0,312,240,WN

********************************

This will get you going on FMC flight planning on C130.
With Nav display and CDU.


Kin M.
(Klax)

Thanks Kin

I will give that a try  Appreaciate  the Help !!

matsuman wrote on Jul 1^st, 2012 at 8:22pm:

ISG FSX this is what i have........ On panel.cfg.....add Window21=HW_B737_ND Window22=SMITHS_FMS Window23=HW_B737_EFIS_CNTR Window24=MCU ***************** [Window21] Background_color=0,0,0 size_mm=312,240 window_size_ratio=1.000 position=0 visible=0 ident=4001 window_pos=0.0571, 0.3798 window_size=0.2779, 0.2283 gauge00=isg1!HW_B737_ND, -2,0,312,240,WN [Window22] Background_color=0,0,0 size_mm=312,240 window_size_ratio=1.000 position=0 visible=0 ident=4002 window_pos=0.0571, 0.3798 window_size=0.2779, 0.2283 gauge00=isg1!SMITHS_FMS, -2,0,312,240,WN [Window23] Background_color=0,0,0 size_mm=312,240 window_size_ratio=1.000 position=0 visible=0 ident=4003 window_pos=0.0571, 0.3798 window_size=0.2779, 0.2283 gauge00=isg1!HW_B737_EFIS_CNTR, -2,0,312,240,WN [Window24] Background_color=0,0,0 size_mm=312,240 window_size_ratio=1.000 position=0 visible=0 ident=4001 window_pos=0.0571, 0.3798 window_size=0.2779, 0.2283 gauge00=isg1!MCU, -2,0,312,240,WN ******************************** This will get you going on FMC flight planning on C130. With Nav display and CDU. Kin M. (Klax)

Hello Kin,

You also try VC section?