I've updated this XML gauge for the CS 727-100/F and -200/F. Now includes LB / KG and °C / °F display.

Now in the Avsim library, search for:
V-One Gauge for B727-100/F 727-200/F with Call-Outs

The sounds:

• 80 knots
  
• V1
  
• VR
  
• V2
  
• Gear Up
  
• Flaps Up
  
• Slats Retract
  
• Trim Wheel Sound
  

The gauge will calculate the correct v-speeds for gross weight using flaps 5, 15 & 25 including the required trim units.
The v-speeds are also adjusted for altitude and temperature.
Optimum FL and EPR are displayed based on current gross weight and are continually updated.
Clean speed (no flaps) is calculated as is Vref30 and Vref40.
Fuel, Gross Weight, OAT (°C or °F) and CG are displayed.
If the current gross weight has exceeded the max gross weight a 'red' warning of overloading is displayed.
Elapsed flight time and fuel used can be reset at anytime by clicking on their displays.

The main gauge is a text display of:

• Vertical Speed
  
• Pitch
  
• EPR
  
• N1%
  
• Fuel Flow
  
• TAS
  
• TAT
  
• MCT (Maximum Continuous Thrust)
  
  After flap selection, the following will display:
  
• Flaps selected
  
• Required Trim/Current Trim
  
• Vr & V2

Note: EPR, N1% and FF are for Engine 2 only.

Both the main gauge and datacard can be toggled off and on via an icon.

http://i823.photobucket.com/albums/zz155/fsxpaul/FSX/V-One_cs727.jpg