Updated expansion models (ADV, -100) are available. Now they supports the new 737-200 base pack 1.0 features.

Sould I download and install the updated models?
Only if you have purchased the Expansion Models before 02:30 21APR2012 .

How to get the updated models?
1. Check-in to Your Profile.

2. In Your Profile click: Product > 737 Captain (737-100 and/or -ADV Expansion Models) > Extended Download Service and download them to any folder on your computer.

3. Uninstall previous version of the Expansion Models. (Start> Programs> Captain Sim> 737 Captain> )

4. Delete all FLIGHTS saved with the Expansion Models.

5. Make sure the 737 Captain (737-200) base pack 1.0 is installed.

6. Double click the downloaded files to install* the updated models.

* - The updated models will overwrite previously installed freeware liveries and/or other modifications of the original product. Prior to uninstall the product please backup all data added to the original product.

have i installed all the files correctly as i have no cockpit when i select the freighter. i installed them as follows cse 730-030 , 731-1500 , 733-1000 am i missing something thanks

Install 737 Captain (737-200) base pack first, then all expansions.

micker wrote on Apr 22^nd, 2012 at 9:25pm:

have i installed all the files correctly as i have no cockpit when i select the freighter. i installed them as follows cse 730-030 , 731-1500 , 733-1000 am i missing something thanks

Not trying to step on your toes here Tanya, but I think one of those files is wrong. I'll explain it.

@micker. You say you install the cse737_030, which I assume to be an Expansion Model (the csexxx designation), while the only 730_0300 was actually the csx730_0300.exe. So that means you are installing the csx730_0300.exe (which is the 737-200 Exterior Model). What you need csp732_1000.exe (which is the 737-200 Base Pack), then you can install the cse731_1500.exe (737-100 Expansion Model) and cse733_1000 (737-200C/F Expansion Model.
Those last two, are programmed to work with the 737-200 Base Pack and so will not work the 737-200 Exterior Model.

You need to purchase the 737-200 Base Pack Upgrade. That way you get your 10 Euro discount. ;)

Hope this helps.

Mark

You are right, Mark. I should have explained it in details.

I loaded 737-200 ADV, everytime I try to use the adv verzion MSFSX crashes I get this error message: "visual model won't diplay CS 737-200 ADV captain paint0 - fatal message" can anyone help me?

ronm85 wrote on Apr 25^th, 2012 at 2:14am:

I loaded 737-200 ADV, everytime I try to use the adv verzion MSFSX crashes I get this error message: "visual model won't diplay CS 737-200 ADV captain paint0 - fatal message" can anyone help me?

#2 and #3 will help: http://www.captainsim.org/yabb2/YaBB.pl?num=1334974243/0#0

Hi community,

I am a little confused here, so need some help please......

OK, I purchased the original 737-100 base pack when it was first released. Still have my installer and activation codes. Then, a few weeks ago, I purchased the -200 upgrade pack special. I followed all of the instructions, and all is well, but I am confused about the -100.

Do I have to re-purchase the -100, or can I re-use my original installer? It's strange that my ACE sees the -100 as well, even though it is not there.

Thanks all,

Andrew.

Gorilla wrote on May 7^th, 2012 at 6:46am:

Hi community, I am a little confused here, so need some help please...... OK, I purchased the original 737-100 base pack when it was first released. Still have my installer and activation codes. Then, a few weeks ago, I purchased the -200 upgrade pack special. I followed all of the instructions, and all is well, but I am confused about the -100. Do I have to re-purchase the -100, or can I re-use my original installer? It's strange that my ACE sees the -100 as well, even though it is not there. Thanks all, Andrew.

Hi Andrew.

Firstly. I'm assuming that you have bought (or upgraded to) the 737-200 Base Pack v1.0 and are not using the 737-200 Base Pack v0.X. Correct me if I'm wrong.

Do this:
Check-in to Your Profile > Select 737 Captain (737-100 Expansion Model) > Extended Download Service > Get New Links and download it again. The 737-100 Expansion Model is now at version 1.5 (cse731_1500.exe) and goes with the 737-200 Base Pack version 1.0 (csp732_1000.exe).

That should be all you need to do.

Install 737-200 Base Pack v1.0 (your post says it already is) followed by the 737-100 Expansion Model.

Mark

My FS program works with the -200ADV, However I don't have any engine sounds, Help!

Hi community, can anyone help me? I loaded 737 adv and it works fine, however I don't have any engine sounds.

ronm85 wrote on May 28^th, 2012 at 3:14am:

Hi community, can anyone help me? I loaded 737 adv and it works fine, however I don't have any engine sounds.

Go to the [FSX]\SimObjects\Airplanes\CS_B727-200ADV\sound folder and open the sound.cfg with notepad (it should be the only file in that folder). Once you open it, you should see this:

[fltsim]
alias=CS_B737-200\sound

If you see that, the sound should be working. If yours is different, then that is probably why you don't hear any sounds.

Mark

I'm getting ready to upgrade to the ADV,
Saw this post,
But just went to download " csp732_1000.exe "
( The only one I didn't back up )
For clean install up to ADV,

Its only showing a link for  " csx730_0300 " in the,
( 737 Captain (737-200 Exterior Model)
Do I have the correct one?

Thanks,
k

Please check-in to Your Profile then click Product Name > Customer Support > to submit a Ticket.

Thank you.

I have to reinstall all my 737 models on my new computer.I'm getting confused about the sequence of installation,as the file names are somewhat different from the product names.
I have: 737 Captain(737-200 Exterior Model)
           737Captain(737-100 Expansion model)
           737Captain(737-200) Upgrade
           737Captain(737-200Adv Expansion model
           737Captain(737-200C/F) Expansion model.
Tha'ts five combinations.What sequence of the above shoiuld be my order of installation.Any help appreciated for an old guy
Ron :( :(

Hi Ron,

the way I have it and did it a month ago or so:

1.  cs737_200 v1.0   =   csp732_1000.exe
2.  cs737_100 v1.5   =   cse731_1500.exe
3.  cs737_200ADV v1.1   =   cse732_1100.exe
4.  cs737_200CF v1.0   =   cse733_1000.exe

in that sequence. Hope this helps,
best regards,
Lex

Thanks very much for your quick reply Aflex,I'll try that.
Ron

I seem to be having a problem when loading my 737-200 ADV, when I select Virtual Cockpit view the position is sooo far up front that I don't see the cockpit...