CoastalDriver wrote on Oct 3^rd, 2011 at 12:38am:

I am not sure but does the 707 load no engine runnings, reason I ask is that If I get out of FSX then reload the trike, the select the 727 it loads up fine with engines running etc. but it is only when I select the 707 that I get this no engines running situation. I also noted that a circuit breaker check also shows a lot of them pulled when this configuration occurs. Weird.

Unfortunately, it sounds like "normal" for the 707. It does that to me all the time. :(

This is how I start a flight in the 707:

1. Create/load the flight using the FS Flight Planner.
2. Work out the fuel required for the flight.
3. Set the fuel quantity in the Aircraft > Fuel and Payload > Fuel
4. Now I am ready to start my flight. I do not start my engines before doing the three items above!
5. I try not to access the menu again as sometimes it resets some things. It wouldn't be the fiurst time it has turned the Center fuel tank pumps on when it is empty cause two engines to flame out!

Mark