CAPTAIN SIM FORUM | |
767 Captain (FSX) >> 767 Captain (FSX) >> Window seat
https://www.captainsim.org/forum/csf.pl?num=1302822473 Message started by pj747 on Apr 14th, 2011 at 11:07pm |
Title: Window seat Post by pj747 on Apr 14th, 2011 at 11:07pm
Does anybody (Markoz) have the proper coordinates for a window seat in the 767-300, for business class?
|
Title: Re: Window seat Post by boeing247 on Apr 15th, 2011 at 2:12am
Well, I'm not Mark and I don't have coordinates (I'll look for some when I have time)... ;) but you know how to move the viewpoint while in FSX, right?
|
Title: Re: Window seat Post by pj747 on Apr 15th, 2011 at 3:57am
I know where to do it. Will probably get ezdok though.
|
Title: Re: Window seat Post by boeing247 on Apr 15th, 2011 at 4:36am
No, I mean change the viewpoint with key commands while you're flying the plane. ;)
|
Title: Re: Window seat Post by Markoz on Apr 15th, 2011 at 8:28am
I know I told someone how to change the location from the aisle seat to the window seat a while back. I'll look it up and post the link here if I find it. If not, I'll redo it and post the result here anyway. :)
Mark |
Title: Re: Window seat Post by pj747 on Apr 19th, 2011 at 1:33am
ANy luck?
|
Title: Re: Window seat Post by Markoz on Apr 19th, 2011 at 10:16am
Hi pj747.
Business Class window seat: [CameraDefinition.008] Title = "Business Class Cabin" Guid = {37530007-1A76-4002-8D62-6A52F7880DB2} Origin = Virtual Cockpit MomentumEffect = YES SnapPbhAdjust = Swivel SnapPbhReturn = False PanPbhAdjust = Swivel PanPbhReturn = False Track = None ShowAxis = YES AllowZoom = TRUE InitialZoom = .3 SmoothZoomTime = 2.0 ZoomPanScalar = 1.0 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=30 HeadingPanRate=75 PanAcceleratorTime=0 //InitialXyz=1.20, 0.20, -7.00 //InitialPbh=13, 0, 200 InitialXyz=2.47, -0.5, -7.00 InitialPbh=0, 0, 90 xyzRate=0.5 Coach Class window seat: [CameraDefinition.010] Title = "Coach Class Cabin" Guid = {FDADCBDB-0D5A-41B9-BBC1-5BF18E74A443} Origin = Virtual Cockpit MomentumEffect = YES SnapPbhAdjust = Swivel SnapPbhReturn = False PanPbhAdjust = Swivel PanPbhReturn = False Track = None ShowAxis = YES AllowZoom = TRUE InitialZoom = .3 SmoothZoomTime = 2.0 ZoomPanScalar = 1.0 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=30 HeadingPanRate=75 PanAcceleratorTime=0 //InitialXyz=1.40, 0.1, -41.00 //InitialPbh=2,0,0 InitialXyz=2.47, -0.5, -39.79 InitialPbh=0,0,90 Red text = add the // at the begining of the line (comment it out) so is isn't read by FSX. It can be deleted if you prefer. Back up the original aircraft.cfg FIRST! Blue text = the new location (first line) and the view is set to 90o right to look out the window (second line). Mark |
Title: Re: Window seat Post by fs_addict on Apr 19th, 2011 at 2:06pm
Would it be possible, with basic tweaking to those codes (change title, change camera Definition Numbers ), to make a completely new view from that position?
|
Title: Re: Window seat Post by Markoz on Apr 19th, 2011 at 3:27pm fs_addict wrote on Apr 19th, 2011 at 2:06pm:
Yes it is. Be aware that for each new CameraDefinition.xxx you need to have a new GUID. I get them from here: http://www.guidgenerator.com/online-guid-generator.aspx [CameraDefinition.008] as a general rule, but not a must do, the [CameraDefinition.x] is used for external views and [CameraDefinition.xxx] for internal (VC) views. Title = "Business Class Cabin" this is the window name, it appears in the top right hand side of the screen when the view is first entered Guid = {37530007-1A76-4002-8D62-6A52F7880DB2} the GUID must be enclosed in these { } type of brackets Origin = Virtual Cockpit Interior views always have Virtual Cockpit as the Origin, while external views always have Center as the Origin. InitialXyz=2.47, -0.5, -7.00 as far as I am aware, this is the location of the view in relation to the "eyepoint" location listed in the [views] section of the aircraft.cfg InitialPbh=0, 0, 90 P=pitch (tilt up/down), b=bank (tilt left/right) & h=heading (turn left/right). So 0,0,90 would mean your head is NOT tilting forwards, backwards nor tilting to the left or right, but you are looking 90o to the right the nose of the aircraft Hope this helps. Mark |
Title: Re: Window seat Post by fs_addict on Apr 19th, 2011 at 4:43pm Markoz wrote on Apr 19th, 2011 at 3:27pm:
Yes, it does. Thank you Markoz. ;) |
Title: Re: Window seat Post by pj747 on Apr 19th, 2011 at 11:36pm
Hye Markoz, do you have one for the business class cabin that isn't the bulkhead?
|
Title: Re: Window seat Post by fs_addict on Apr 20th, 2011 at 1:36am 701151 wrote on Apr 19th, 2011 at 11:36pm:
I don't know if Markoz has the codes, but I do. Here they are: [CameraDefinition.009] Title = "Business Class Cabin Window" Guid = {006e6e15-ecfe-4913-86ff-b8d4209ff67a} Origin = Virtual Cockpit MomentumEffect = YES SnapPbhAdjust = Swivel SnapPbhReturn = False PanPbhAdjust = Swivel PanPbhReturn = False Track = None ShowAxis = YES AllowZoom = TRUE InitialZoom = .3 SmoothZoomTime = 2.0 ZoomPanScalar = 1.0 ShowWeather = Yes XyzAdjust = TRUE ShowLensFlare=FALSE Category = Cockpit PitchPanRate=30 HeadingPanRate=75 PanAcceleratorTime=0 InitialXyz=2.47, -0.5, -8.25 InitialPbh=0, 0, 90 xyzRate=0.5 I have highlighted in blue what to change for just the window. I've highlighted in red what to change for a completely new view. Note: I'm using the window as a different view, so it has a different title, GUID, and Camera def. number. You could do this too, just remember two things: if you put this code in the middle of the others, number the rest so they stay in order. Also, always back up the aircraft.cfg. Hope these help! ;) |
Title: Re: Window seat Post by boeing247 on Apr 20th, 2011 at 3:54am
If you move the viewpoint while flying, is there a way to find your xyz coordinates so you can use those to create a new viewpoint (so you wouldn't have to guess where it is)?
|
Title: Re: Window seat Post by Markoz on Apr 20th, 2011 at 5:42am boeing247 wrote on Apr 20th, 2011 at 3:54am:
The only way I know of doing that, but haven't used, is using EZdok Camera Addon (EZCA). You can by it from Flight1 for $US34.95. I own a copy, but it isn't installed at the moment. From memory, when you save a location in the VC/Cabin, it saves the (I think it actually shows) the co-ordinates. Please don't quote me on that. I really should install and learn how to use it. I'm just too busy flying all the time! Mark |
Title: Re: Window seat Post by Sonoace on Apr 20th, 2011 at 12:21pm
Is EzDok easy to use, or is it like that EzWalk, which you have to do all these different eyepoints and places :o
767_captain_001.jpg (Attachment deleted)
|
CAPTAIN SIM FORUM » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |