CAPTAIN SIM FORUM
Weapon for FSX >> Weapon for FSX >> HUD not showing anything
https://www.captainsim.org/forum/csf.pl?num=1297213669

Message started by Arclight on Feb 9th, 2011 at 1:07am

Title: HUD not showing anything
Post by Arclight on Feb 9th, 2011 at 1:07am
Hello,

I have installed the new weapon pack for FSX and when I select the CS F-18 for the weapon pack I have nothing showing on the HUD. Please see attached jpeg.  Thanks

Screenshot.jpg (Attachment deleted)

Title: Re: HUD not showing anything
Post by Markoz on Feb 9th, 2011 at 3:49am

Arclight wrote on Feb 9th, 2011 at 1:07am:
Hello,

I have installed the new weapon pack for FSX and when I select the CS F-18 for the weapon pack I have nothing showing on the HUD. Please see attached jpeg.  Thanks

I had that happen to me too when I first got it. The difference was that it worked the first couple of times and then the HUD wouldn't come up anymore no matter what I did. I just uninstalled it then reinstalled it and it has been working ever since. Try that to see if it fixes it.

Mark


Title: Re: HUD not showing anything
Post by Arclight on Feb 9th, 2011 at 11:15am
Thanks Mark!!

I'll give it a shot.


Cheers!

Title: Re: HUD not showing anything
Post by Arclight on Feb 9th, 2011 at 11:52am
Well Mark,
I tried it and still no HUD.  Thanks though!!


Title: Re: HUD not showing anything
Post by Markoz on Feb 9th, 2011 at 12:37pm
Hi.

The next step requires a complete uninstall. This includes deleting the entries in the registry (regedit) AFTER you uninstall the product. It also means that you will need to activate it online again when you reinstall it.

How to clean Registry:
1. Uninstall the product
2. Go to Start> Run. Type: regedit, click OK.
3. Find the product entry in HKEY_LOCAL_MACHINE\SOFTWARE\CaptainSim\ (please note, for Windows 64bit versions it is HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\CaptainSim\)
For example: HKEY_LOCAL_MACHINE\SOFTWARE\CaptainSim\C130XPRO (64 bit example: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\CaptainSim\C130XPRO)
Make sure you are going to delete correct folder!
4. Delete the product entry folder.
5. Restart your computer.
6. Install the product.


In your case the entry is HKEY_LOCAL_MACHINE\SOFTWARE\CaptainSim\w001 (64 bit: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\CaptainSim\w001). See the attached image.

Hope this helps.

Mark
w001_reg_entry.jpg (Attachment deleted)

Title: Re: HUD not showing anything
Post by Arclight on Feb 9th, 2011 at 1:55pm
Thanks Mark!!

I will let you know how it works out!!

Regards,

Title: Re: HUD not showing anything
Post by Arclight on Feb 9th, 2011 at 10:40pm
Well I did what you suggested and still no joy!!
I even installed it on my other computer that has FSX/WINXP and it does the same thing. Any other suggestions? Also I filed a trouble ticket with CS and have heard nothing back and that was 2 days ago. Once again Mark I appreciate all the help you have given so far.

Regards,

Title: Re: HUD not showing anything
Post by spoonsnz on Feb 10th, 2011 at 4:51am
I have the same problem and have submitted one of them kb things..

I have try both of the above and still have no luck.
I have also tryed it on other aircraft with no luck.
so would be greatfull  if there is a fix for this.

It looks to be a great fun addon for FSX.

Thanks
Spoons

Title: Re: HUD not showing anything
Post by Markoz on Feb 10th, 2011 at 5:00am
Okay. A Final option that might get this working for you.

Check-in to Your Profile > Select Weapon for FSX > Extended Download Service > Get New Links. Click on that link and download and install it again. You could have an incomplete download. It sounds weird, but it does happen and it has actually happened to me and this final method was the only way to fix the problem that I had.

I hope this will get you going with this great add-on.

Mark

Title: Re: HUD not showing anything
Post by Arclight on Feb 10th, 2011 at 3:13pm
Thanks Mark again for all your help!!!

I 'll let you know the outcome!

Cheers

Title: Re: HUD not showing anything
Post by Arclight on Feb 11th, 2011 at 11:23am
Well I tried that (Downloading again)  and that did not work either. Thanks Mark for the suggestion. I have yet to hear from anyone from CS on this. Any other ideas?


Regards

Title: Re: HUD not showing anything
Post by Captain Sim on Feb 11th, 2011 at 4:22pm

Arclight wrote on Feb 11th, 2011 at 11:23am:
I have yet to hear from anyone from CS on this. Any other ideas?


Please submit a ticket.

Title: Re: HUD not showing anything
Post by Arclight on Feb 11th, 2011 at 7:37pm
Hello Capt Sim,

I already submitted a ticket on 2011-02-05  Weapon for FSX Virtual Cockpit (graphics) The HUD is inoperable...

Regards,

Title: Re: HUD not showing anything
Post by spoonsnz on Feb 12th, 2011 at 12:09am
I have also tryed redown loading and installing.
also submitted a KB on the 5-2-11, having not done one before have just been waiting a reply. the number it gave me was 6618.
do you get a email after submitting a KB ?

thanks
Spoons

Title: Re: HUD not showing anything
Post by Arclight on Feb 12th, 2011 at 5:09pm
Well, I have solved the issue and it was due to a corrupted FSUIPC.DLL.
Once that was fixed, the HUD now works and I am able to fire.

BTW this was with the CS F18 with just the Weapons pack, no manual modifications.

Thanks Mark again for your assistance!

If you having this issue, delete and then re-install FSUIPC.


Regards

Title: Re: HUD not showing anything
Post by Captain Sim 2 on Feb 14th, 2011 at 6:47pm

Arclight wrote on Feb 12th, 2011 at 5:09pm:
Well, I have solved the issue and it was due to a corrupted FSUIPC.DLL.
Once that was fixed, the HUD now works and I am able to fire.


Thank you for your inquiry.
It has been processed and new KB# 6616 added to the Knowledge Base.
Please check-in to Your Profile  and use Customer Support > Search KB > KB# 6616.

Title: Re: HUD not showing anything
Post by Stinger on Feb 18th, 2011 at 5:59pm
I'm having the same issue with the HUD on the Armed F-18. Can't see anything and can't fire. I deleted the FSUIPC.dll and i still don't see the HUD. I also reinstalled the weapon pack to no avail. What else can I do?

Title: Re: HUD not showing anything
Post by Stinger on Feb 24th, 2011 at 4:31pm
Guess i wont be getting any help on this?

Title: Re: HUD not showing anything
Post by Sonoace on Feb 24th, 2011 at 5:12pm
Hi

I'm having a problem with effects. I shoot the boat, It doesn't blow up. I fire my Hydras and Zunis. Nothing. Then a missile,and nothing. Nothing like the Video with the bell. And also, how do you get the rockets to fire at a direct target?
Thx-

Title: Re: HUD not showing anything
Post by Captain Sim 2 on Feb 24th, 2011 at 7:54pm

StephenL wrote on Feb 24th, 2011 at 5:12pm:
Hi

I'm having a problem with effects. I shoot the boat, It doesn't blow up. I fire my Hydras and Zunis. Nothing. Then a missile,and nothing. Nothing like the Video with the bell. Thx-


The question has been previously answered by our Customer Support.
Please check-in to Your Profile and use Customer Support > Search KB > KB# 6724.

Title: Re: HUD not showing anything
Post by kicket on Feb 26th, 2011 at 1:35am
I have the same problem blank hud no weapons fire I replaced the FSUIPC.dll  nothing i re downloaded re installed. >:(

Title: I did it again
Post by kicket on Feb 26th, 2011 at 2:12am
Well after having so many problems with previous product 757 Freighter i said never again..well then came FSX Weapons so i caved in bought it guess what?? 3hrs trouble shooting and it still don't work the manual reads like a 1st grader put it together basic info only that is no help IF i cannot get it working by tomorrow I will demand my refund.
I cannot understand how and why their are so many problems with their products the solution is always the same install reinstall if that don't work its your fault and your problem thanks for your $$ have a nice day.
why can't a product just work as advertised?

I get a blank hud
no weapons fire
I replaced/updated the fsuipc
installed
uninstalled
reinstalled
looked at all the trouble tickets
nothing nadda...
is their any special flights? missions?  i see nothing

Title: Re: I did it again
Post by boeing247 on Feb 26th, 2011 at 3:26am
Odd that you're having so much trouble with captain sim products...

Okay-- a few questions:
1. What are your system specifications? (video card, processor, RAM...)
2. What plane are you using for weapon?
3. Do you have Acceleration (and you ARE using FSX, right)?
4. Are there any signs at all that it installed at all? Check your SimObjects folder...
5. Do you understand anything in the manual? I mean, do you know how to fire missiles, make the weapon panel show, use the weapon panel?

Title: Re: I did it again
Post by boeing247 on Feb 26th, 2011 at 3:32am
I assume you've looked at this: Customer Support > Search KB > KB# 6616.

Title: Re: I did it again
Post by kicket on Feb 26th, 2011 at 4:48am
ok
video card processor  irrelevant question as that has nothing to do with the problem its a high end system with a 9800 GTX

I have Acceleration
i tried the stock F18 shows the target icon in the aircraft menu
I tried the the ah64 alphasim
the Iris F14,F4
A1j

I get the blank hud and the control panel
I turn on the master arm and get 0000 rounds in the indicator
no key i use fires anything i tried them all
I see nothing in the key assignments I am going off the Manuel
is their supposed to be some type of radar? the Manuel says nothing

I installed into the main fsx folder per the instructions.
I  am just so frustrated

Title: Re: I did it again
Post by Markoz on Feb 26th, 2011 at 4:53am
If you are using Vista or Windows 7, did you install Weapon for FSX using the "Run as administrator" on the csw001_1000.exe?

Title: Re: I did it again
Post by kicket on Feb 26th, 2011 at 4:54am

boeing247 wrote on Feb 26th, 2011 at 3:32am:
I assume you've looked at this: Customer Support > Search KB > KB# 6616.

yes what great help that was  
But FSUIPC might block some FSX functions required for the Weapon. Just a thought

as in they don't know tech support don't know  so instead of posting fact we will post guesses and we think it might ...great help that is.

Title: Re: I did it again
Post by Markoz on Feb 26th, 2011 at 5:00am
Weapon for FSX doesn't use FSUIPC. So there shouldn't be a conflict unless you have assigned keyboard shortcuts for the same keyboard commands that Weapon for FSX has assigned by default.

e.g. CTRL+6 (which is used to turn on the Weapon for FSX) might be assigned to some other function through FSUIPC.

Mark

Title: Re: I did it again
Post by kicket on Feb 26th, 2011 at 5:27am
yes I took out the fsuipc  still nothing
oh i do not use vista
windows XP  

Title: Re: I did it again
Post by Lost in Isaan on Feb 26th, 2011 at 6:01am
You should have a new Flight in your library called "F4 at 12 O'clock", if not you have an installation problem. Try loading it and 1st up set the weather to clear skies to give yourself a fighting chance to become familiar with what you have.

Very east to find the Phantom and shoot it down, you will not have to configure anything.

Title: Re: I did it again
Post by boeing247 on Feb 26th, 2011 at 7:31am
I'm still not sure why your HUD is blank (do you mean totally blank, or it's just the standard HUD with no weapon stuff?), but try this:

I assume you know how to operate weapon, but just in case you aren't totally sure, here's the steps: press Shift+1 to open the control panel, and flip the master switch (far left) to turn on weapon. Everything from there is easy, just navigate to the weapon category (i.e. missile, gun, rocket) and press Ctrl+Shift+7 to cycle through the weapons in each category (for the Hydra rockets--the one with 120 ammo--you should press Ctrl+Shift+8 twice to stop it from firing a ton of rockets at once and freezing the sim).

Okay, now that we're through that, Here's my advice: if your missiles don't fire, it's probably because your firing keys/joystick buttons conflict with simulator commands. For instance, on my computer, Spacebar activated mouse look-around, so naturally I could not use that for firing. Joystick Button 1 on my joystick was break, so that could not be used either. Read the SDK (download the pdf from captain sim) and find out how to re-map keys in the CSweapon.xml file (it's located in the CS_F18 folder in SimObjects and the folders of whatever other planes you installed weapon on--you'll have to re-map for each)--I changed it to the O key and Joystick Button 3, neither of which had previously mapped commands.

Right. That's a lot of stuff, most of which you probably won't need, but I just want to include as many possible solutions as possible  ;). If you could provide a screenshot of the virtual cockpit with the weapons panel open, that would be great, because right now all we're going off of is description (which you've provided plenty of  :)), and an actual picture might clearly show the problem.

Cheers,
boeing247

Title: Re: I did it again
Post by kicket on Feb 26th, 2011 at 8:01am
smae as in this thred
http://www.captainsim.org/yabb2/YaBB.pl?num=1297213669
the NO HUD hud
same thing
Ill try the SDK thing
I feel sorry for any anyone that does not know the interworking of FS
as this all should be unnecessary when you by an addon.
i will let you know what happens

Title: Re: HUD not showing anything
Post by kicket on Feb 26th, 2011 at 5:02pm
No Joy   tried remapping the keys still nothing  just a pretty weapons panel and an empty glass hud

Title: Re: HUD not showing anything
Post by boeing247 on Feb 26th, 2011 at 6:26pm
Okay, this probably isn't the solution, but is your HUD turned on? (can you even turn it off? I'm not sure, but I think there should be a way...)

Title: Re: HUD not showing anything
Post by kicket on Feb 26th, 2011 at 6:39pm
according to the manual as long as the battery and avionics are on it should work
I tried default aircraft too i see the peaces all over fsx folder so i know it installed

looks like another reason to shelf FSX (again)
and another reason to avoid any CS product for me at least this is 2 for 2  I am sick of it  >:( >:(
Another reason I prefer Try before you BUY or demo(timed Versions) Had the demo not worked i would have known it was not worth the $$ or time.

Title: Re: HUD not showing anything
Post by boeing247 on Feb 26th, 2011 at 7:45pm
Have you bought addons from other companies? If so, did they work? I'm beginning to suspect that your fsx installation went awry...  :-?

Title: Re: HUD not showing anything
Post by kicket on Feb 26th, 2011 at 10:01pm
yes I have lots of addons  CS seems to be the only ones i ever have issues with go figure
the whole process is harder then it should be
from the block system
to the key mapping

2-1+1 map that key open this file edit that script ect...noone should have to go through that crap.
like now i am uninstalling FSX totally ran fine for a year
then ill spend the next 5 hours reinstalling everything to try to get this thing to work....day 2 I spend 99% of my time messing with it instead of playing it...BULLCRAP

Title: Re: HUD not showing anything
Post by boeing247 on Feb 26th, 2011 at 11:09pm
This is downright bizarre... when you reinstall fsx, redownload the captain sim addons first, run fsx (before installing any other addons except acceleration) and tell us if it works...  :-/

Title: Re: HUD not showing anything
Post by kicket on Feb 27th, 2011 at 1:03am
OK update I uninstalled FSX and Acceleration   reinsalled everything
its kind of working now but now when i Fire the guns the sound of the gun don't stop so 1 problem down another to figure out.

Title: Re: HUD not showing anything
Post by boeing247 on Feb 27th, 2011 at 2:58am
I remember reading that question before... I see you made a post in sound issues... hope you find an answer!

Happy flying!

Title: Re: HUD not showing anything
Post by kicket on Feb 27th, 2011 at 3:47am
Thanks now if i can get it to stop freezing sometimes locking up  every time I launch a weapon...thanks for your help.I am still staying away from CS products in the future.

Title: Re: HUD not showing anything
Post by boeing247 on Feb 27th, 2011 at 7:30am
Are you firing the 120 ammo rockets? I had a problem with those. I just pressed Ctrl+8 a few to change the firing to 1+4 so it only fires 2 at a time instead of 60. I suppose, though, if you have bad luck with CS products, no sense in spending money on them, though I hope the seventy-some dollars you've spent on the two addons you have doesn't go to waste... keep trying! Sometimes things just start working, it's odd, and I wish it would happen more often...  ;)

Title: Re: HUD not showing anything
Post by zsoltfireman on Apr 4th, 2011 at 6:24pm
Unfortunately for me the same problem!
New FSX are installed on, and after him did not change anything
I'd appreciate it if you would implement a permanent solution to the problem!

Title: Re: HUD not showing anything
Post by zsoltfireman on Apr 5th, 2011 at 6:34am
I ask the honorable CS team to help me!
The package does not work!
Re-installed the FSX
Thereafter, the CSWP package does not work!

Thank you!

Zsolt Beleznay

Title: Re: HUD not showing anything
Post by Captain Sim 2 on Apr 5th, 2011 at 8:07am
Zsolt, please see the Forum Rules, Rule #1. Thank you for understanding.

Title: Re: HUD not showing anything
Post by zsoltfireman on Apr 5th, 2011 at 9:39am

Captain Sim 2 wrote on Apr 5th, 2011 at 8:07am:
Zsolt, please see the Forum Rules, Rule #1. Thank you for understanding.


I mean
But here I saw the related entries  :-/

CAPTAIN SIM FORUM » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2024. All Rights Reserved.