I've just tried it at the position from your screenshot, Morten. Don't mind the direction my plane is facing, I haven't parked it correctly at the gate, but the position itself is the same as on your screens.

http://img839.imageshack.us/img839/1152/posnnl.th.jpghttp://img851.imageshack.us/img851/1078/statey.th.jpg

It works with the normal steps. Which are:

• establish external power
  
• route the external power through the plane (FE panel setup)
  
• parking brake on
  
• startup both INS in stby (MSU)
  
• enter the current position into both units (your data looks correct)
  
• switch to DSRTK/STS, delete the error codes coming up after the self test with pressing and holding TEST
  
• switch both MSUs to ALIGN
  
• click the upper right screw on the MSU to start the faster alignment
  
• watch the units going from 9 down to 5, the green 'NAV READY' light will come up
  
• watch the units going from 5 down to 0 while not starting the engines or moving the plane
  
• finally, switch both MSUs to NAV, then you can start the engines or move the plane
  

You screenshots don't show any error codes, so things could be right at your end and the question from jettrader is valid. Maybe you did not use the fast align option and just have to wait some more. If there was a problem, you would get an error code.