Post by Chigley on Aug 30th, 2011 at 10:37pm
This is becoming tedious :(
I have read all the suggestions on this thread and the other http://www.captainsim.org/yabb2/YaBB.pl?num=1231365884/15
and I'm still getting the same problem. I have also reinstalled the program several times. In my case the duration of the flight doesn't seem to be an issue it's when I start a let down from altitude or reaching the 10k ATC transmissions, I lose COM, VHF, GPS, AP. I have tried the Cessna default, using a keystroke command for AV master, generator on/off and AP on/off. Once the systems suddenly cut out nothing resets them. Going by the general thoughts that this is a power setting problem attached is a screenshot of the Eng upper panel. Can anyone see an incorrect setting or any other suggestion; is it feasible for the problem to be linked to ACE selections?
2011-8-30_22-22-16-906_500x400_480x384.jpg (Attachment deleted)
I have read all the suggestions on this thread and the other http://www.captainsim.org/yabb2/YaBB.pl?num=1231365884/15
and I'm still getting the same problem. I have also reinstalled the program several times. In my case the duration of the flight doesn't seem to be an issue it's when I start a let down from altitude or reaching the 10k ATC transmissions, I lose COM, VHF, GPS, AP. I have tried the Cessna default, using a keystroke command for AV master, generator on/off and AP on/off. Once the systems suddenly cut out nothing resets them. Going by the general thoughts that this is a power setting problem attached is a screenshot of the Eng upper panel. Can anyone see an incorrect setting or any other suggestion; is it feasible for the problem to be linked to ACE selections?
2011-8-30_22-22-16-906_500x400_480x384.jpg (Attachment deleted)