Post by Markoz on Sep 15th, 2010 at 4:31pm
Hi Harry.
I did it like this...
First. I added the CS Weather Radar using the WXR Editor.
Second. I opened the panel.cfg (FSX\SimObjects\Airplanes\other_JS4100\panel) file with windows notepad and edited the following:
[VCockpit02]
size_mm=1024,1024
pixel_size=1024,1024
texture=$GaugeTwo
background_color=0,0,0
gauge00=j41!other_j41_rmu_1, 0, 0, 393, 500
gauge01=j41!other_j41_rmu_2, 393, 0, 393, 500
gauge02=OTHER_BAe_JS4100_3!GNSXLS, 1, 508, 512, 408
gauge03=j41!other_j41_alt_pic, 896,0,128,508
//gauge04=rxpWX500!RDR, 532, 528, 472, 331 Commented out this line - in other words I added the // to the beginning of the line
gauge04=WXR!wr_display, 532, 528, 472, 331 Added this line to replace the commented out line above
gauge05=j41!other_j41fms_pu_open, 919,458,53,35
Open the WXR 2D panel, turn it on and the WXR displays in the VC. You need to control it with the 2D WXR panel.
I can get the controls to display in the VC, but the entire gauge show up in the small black screen if I do do it. If I work it out, I'll reply in here how to do it.
Hope this helps.
Mark
EDIT: Here are some images of how it looks.
The 1st image show how it currently looks using te described method.
This 2nd image shows how it looked trying to add the entire WXR in the VC.
I did it like this...
First. I added the CS Weather Radar using the WXR Editor.
Second. I opened the panel.cfg (FSX\SimObjects\Airplanes\other_JS4100\panel) file with windows notepad and edited the following:
[VCockpit02]
size_mm=1024,1024
pixel_size=1024,1024
texture=$GaugeTwo
background_color=0,0,0
gauge00=j41!other_j41_rmu_1, 0, 0, 393, 500
gauge01=j41!other_j41_rmu_2, 393, 0, 393, 500
gauge02=OTHER_BAe_JS4100_3!GNSXLS, 1, 508, 512, 408
gauge03=j41!other_j41_alt_pic, 896,0,128,508
//gauge04=rxpWX500!RDR, 532, 528, 472, 331 Commented out this line - in other words I added the // to the beginning of the line
gauge04=WXR!wr_display, 532, 528, 472, 331 Added this line to replace the commented out line above
gauge05=j41!other_j41fms_pu_open, 919,458,53,35
Open the WXR 2D panel, turn it on and the WXR displays in the VC. You need to control it with the 2D WXR panel.
I can get the controls to display in the VC, but the entire gauge show up in the small black screen if I do do it. If I work it out, I'll reply in here how to do it.
Hope this helps.
Mark
EDIT: Here are some images of how it looks.
The 1st image show how it currently looks using te described method.
This 2nd image shows how it looked trying to add the entire WXR in the VC.
