Post by fsxpaul on Jan 12th, 2013 at 10:30pm
Berlopez wrote on Jan 9th, 2013 at 5:06pm:
| Now I'm having naother issue, My barometer shows 200' above the call: It call 200' whne the needle is ahowing 400' and so on...? Deespite me pressing the "B" key to set the pressure that is given by ATC, normally std. 29.92...? Not only with the 727 with other planes...Stock as well? Any advice??? |
Hi Bernardo,
The image below is of an approach to KDEN RW07 (5430FT field elevation).
The aircraft is currently 400FT (#2) above the ground at an altitude of approximately 5,750FT (#4) with barometric pressure setting of 29.92 (#3) in of mercury.
Altimeter: Items 3 & 4
#3 is automatically adjusted by pressing 'B' and will only effect #4.
This will not have any impact on your 200FT callout.
Note: FSX defaults to 200FT Decision Height (DH)
Radio Altimeter: Items 1, 2 and 5
Turning knob (#5) will change the DH bug (#1) which is currently set to 200FT.
The bad news is that the knob (#5) doesn't work on the CS727.
So if you adjust the knob (#5) so the DH bug (#1) reads 400FT, your 'Minimums' callout will still be at 200FT.
