Post by Bob Markey on Feb 20th, 2009 at 12:41am
jerooum,
Are you tuning ILS into the ILS radio or the left/right VOR/DME radios? The ILS radio is in the center stand above the rudder trim indicator and below the transponder.
As seen in this pic:
Alternatively, go to the FMC, click the NAV RAD button, punch in your frequency and course in the scratchpad and click the left side button next to the ILS prompt such as "108.90/036"
Then the EFIS map switch must be set to either the expanded ILS or full ILS setting for the HSI to appear on the display. Also, localizer and glideslope information appears on the ADI when the radio has signals for those.
Are you tuning ILS into the ILS radio or the left/right VOR/DME radios? The ILS radio is in the center stand above the rudder trim indicator and below the transponder.
As seen in this pic:
Alternatively, go to the FMC, click the NAV RAD button, punch in your frequency and course in the scratchpad and click the left side button next to the ILS prompt such as "108.90/036"
Then the EFIS map switch must be set to either the expanded ILS or full ILS setting for the HSI to appear on the display. Also, localizer and glideslope information appears on the ADI when the radio has signals for those.