Chamoeq.

If you have followed my sequence the engines should start.  Try the sequence again and please make sure the number 3 engine generator is selected ,THE RED LIGHT MUST BE ON, and the number 3 bleed air switch is in the down position. Make sure  ATM is selected on the VOLTAGE and FREQUENCY and you have voltage showing on the gauges right above the voltage and frequency panel.  You must also have the GTC bleed air switched on too. Check on the engine condition levers on the throttle panel, make sure they are ALL FULLY FORWARD TO THE AIR START POSITION. Go through the procedure once more.  It does not make any difference whether you start from ACE or from the default CESSNA.  I know that some people have had problems with the ACE but the C130 should still start using the default CESSNA.

Let me know what happens.

John.