Hello,

I have the plane CaptainSim 757 III P3Dv4 . Why can it be that if I request a flight clearance via PRO ATC X I get no response from PRO ATC X? Which folder do I have to deposit for the flight plan?

Thanks

Daniel

Go and check if the right frequency is really active (via the flight plan information menu)  . If not just run the cockpit preparation checklist via PRO ATC X . After the checklist is done you should be able to request your clearance .

Leon

daniel19121979 wrote on Jul 16^th, 2018 at 1:19pm:

Hello, I have the plane CaptainSim 757 III P3Dv4 . Why can it be that if I request a flight clearance via PRO ATC X I get no response from PRO ATC X? Which folder do I have to deposit for the flight plan? Thanks Daniel

Hello Daniel!
This is a question you should ask on the ProATC forum! This is because ProATC doesn't list the Captain Sim 757 III in the compatible aircraft yet.
Cheers
Pat

daniel19121979 wrote on Jul 16^th, 2018 at 1:19pm:

Hello, I have the plane CaptainSim 757 III P3Dv4 . Why can it be that if I request a flight clearance via PRO ATC X I get no response from PRO ATC X? Which folder do I have to deposit for the flight plan? Thanks Daniel

Having flown this with PATCX last night I have the answer

When you start your flight in PATCX, you should have ATIS tuned and the next frequency in the standby radio (if you have copilot handling the radios).

I've noticed that if you use the "comms swap" button after you've listened to the ATIS, you get no reply (as you say). If you return back to the ATIS frequency, and then use the "frequency comms swap" keybind (I think the default keybind is the "X" key), the frequencies will swap in the radio pedestal and you can now request clearance.

This is a known issue with several other addons (where the VC comms swap button isn't detected), and this is the work around

Hope that helps

Where is that "frequency comms swap" that you mention? in ProATC X or in Capt Sim 757?

It's in Prepared under the tab: Options-Controls-Key Assignments-Radio-COM 1 radio (transmit).I'm using this letter "O" and it's working for me.

HansK wrote on Aug 22^nd, 2019 at 10:26am:

Prepared

So assign the O key and hold it down when clicking for clearance?